Back to search

University of Leeds

Design and analysis of propeller blade geometry using the PDE method

Abstract

dc:description.abstract

This thesis aims to incorporate geometric and functional design of surfaces using a method known as the PDE method. In particular, it will be demonstrated how the PDE method can be extended to represent an existing marine propeller geometry. Conventionally a propeller surface representation is generated by fitting a B-spline surface through a collection of given propeller blade sections. The PDE method is applied as a boundary-valued problem and consequently it will be demonstrated how a single patch of surface can be used to represent each propeller blade. This is achieved through the parametrisation of the base section of the blade, which can then be altered along the span of the blade. The advantages gained from this technique are firstly that a fair surface is automatically generated, due to the nature of the PDE method. This would not be automatically achieved using a B-spline representation and hence manipulation of the surface would be required. Secondly, the emphasis is on the fact that we can produce a surface representation which is controlled by a small parameter set. This will be fundamental to the final stage of the thesis. In the second part it will be shown that the PDE generated surface is of a form which makes the hydrodynamic analysis of the propeller feasible using methods referred to as panel methods. In this section the pressure distribution over the propeller surface will be calculated, along with the performance of the propeller, which can be compared with the predicted performance from other techniques. The compatibility between the panel method and the PDE generated surface, along with the small parameter set lays the foundations for the final part of the thesis in which the propeller performance will be improved by searching through various parameter subspaces. The emphasis will be on improvement of efficiency. However, to maintain feasible geometries, constraints will be included based on the cavitation numbers of propellers, which will ensure that the final propeller design is non-cavitating.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
1993

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dekanski, Christopher Wojciech
Advisors dc:contributor.advisor
  • Bloor, M.I.G.
  • Wilson, M.J.

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.569278

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Dekanski, Christopher Wojciech. Design and analysis of propeller blade geometry using the PDE method. doctoral thesis, University of Leeds, 1993.