Back to search

University of Leeds

Undercooling-mediated growth transitions in rapidly solidified Cu-Ni alloys: Towards the elucidation of the fundamental mechanism behind ‘spontaneous grain refinement’ in undercooled metallic melts

Abstract

dc:description.abstract

Within the context of the rapid solidification of metals, an experimental investigation has been undertaken in order to elucidate the fundamental mechanism behind the ‘spontaneous grain refinement’ phenomenon; in which abrupt transitions between coarse columnar and fine equiaxed grain structures are observed with increasing solidification velocity. A melt fluxing technique has been employed to undercool and rapidly solidify a Cu-8.9 wt.% Ni alloy and a Cu-3.98 wt.% Ni alloy. This method permits in situ high-speed imaging of the recalescence front, allowing the solidification velocity to be calculated and studied as a function of undercooling. A B2O3 + Na2SiO3 glass flux has been identified as the optimal composition for use in the melt fluxing of Cu-Ni alloys, and undercoolings of up to 240 K have subsequently been achieved. Light microscopy, SEM, EBSD and XRD pole figure analysis has been performed on the as-solidified samples in order to study the evolution of microstructure and texture with increased undercooling/solidification velocity. An extended transition in growth orientation, from <100>-oriented at low undercooling to <111>-oriented at high undercooling, has been observed in both alloys. At intermediate undercooling, competitions between the two growth orientations are observed to give rise to mixed-orientation microstructures, a novel form of the dendritic seaweed structure and multiple twinning. In the high-Ni alloy, this mixedorientation regime appears to coincide with the low undercooling grain refinement transition, subsequently driving a recrystallisation and recovery process. In the low-Ni alloy, however, the mixed-orientation regime does not coincide with the grain refinement region, and grain refinement in this instance occurs via a dendrite fragmentation mechanism. Dendrite fragmentation is also observed to drive spontaneous grain refinement at high undercooling in this alloy. By contrast, at the largest undercooling achieved in the high-Ni alloy, a partially grain refined sample has been obtained, in which the majority of the substructure consists of dendritic seaweed –suggesting that seaweed is the most likely precursor to spontaneous grain refinement in this case. Thus, three separate grain refinement mechanisms have been identified in the two closely-related alloys; the selection of which appears to be dependent upon the original growth structures present, which are in turn determined by the closeness of the competitions between differently-directed anisotropies. It is suggested that the addition of Ni to Cu either increases the strength of the kinetic anisotropy, or decreases the strength of the capillary anisotropy (or both); leading to a closer competition between the two at higher Ni concentrations, thereby accounting for the differences in microstructure and subsequent grain refinement mechanisms.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Leeds
Year dc:date.issued
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Castle, Elinor Grace
Advisors dc:contributor.advisor
  • Mullis, A.
  • Cochrane, R.

Rights

Language dc:language.dcterms_iso639_2
eng

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.617303

Chain of custody

source
Harvested from
White Rose University Consortium
Base URL
etheses.whiterose.ac.uk/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Castle, Elinor Grace. Undercooling-mediated growth transitions in rapidly solidified Cu-Ni alloys: Towards the elucidation of the fundamental mechanism behind ‘spontaneous grain refinement’ in undercooled metallic melts. doctoral thesis, University of Leeds, 2014.