The objective of the diploma thesis is creating digital 3D model of observatory building in Valašské Meziříčí. The building is measured by classical geodetic methods. The results of the thesis are the wired model, which is created in MicroStation V8i, and 3D model with textured surfaces, including visualization in form photos and video, which is created in AutoCAD 2018.

The aim of this thesis is creation of 3D model by a selected program. In the introduction of the thesis is a brief description of chosen object – St. Václav's temple in Brno. Next follows preparation works before measuring, creating of measuring net by GNSS and measuring of object by tachymetric method. In the following chapters is briefly described 2D and 3D computer graphic and program AutoCAD Civil 3D, which was used for create resulting model of the object.

The aim of the thesis is measuring a part of a Svratka’s meander by the means of the FARO focus 3D X 130 scanner and a total station. Another part of the thesis is creating 3D models from individual methods and their comparison. The acquired data is processed in the SCENE, Microstaion Power Draft V8 and Atlas DMT programmes. The accuracies of the scan registrations and the resulting differences among individual methods are evaluated.

The diploma thesis deals with the creation of a 3D model using laser scanning by unmanned aircraft (UAV). In the first part the author describes the history, legislation, the possibility of using unmanned aircraft and their dividing. The next section describes the process of creating a 3D model from data collection, using a drone to the actual modeling in Revit and subsequent use of the 3D model.

The focus of this thesis is the smoothing of manually segmented 3D models of mouse embryo craniofacial cartilege. During the process of manual segmentation, artefacts and other imperfections appear in the final models and need to be repaired. Firstly, manual segmentation is corrected using gradients and thresholding. Subsequent smoothing methods are constructed based on theoretical research. Algorithmizing is executed in the MATLAB environment. All the designed algorithms are then tested on selected models. Statistical evaluation is determined using the Srensen–Dice coefficient, where manually smoothened models cleared of all artefacts are used as the gold standard.

The aim of this master’s thesis was to create cooling unit which will became part of project Barman. Thesis describe process from definition of requirements, proposal, selection of components, PI and D diagram and in the last chapter the construction work. In the second part describe design of cooling unit’s model and simulation of cooling process. The last part of the thesis is describing software of the cooling unit and tis results.

The goal of the diploma thesis is the numerical modelling of flow in planned spillway of the Boskovice dam. In the introduction of this diploma thesis are described and divided basic spillways according to their types and profiles. There are also mentioned emergency spillways. Then the thesis introduces the description of calculation of overflow quantity, the description of mathematic modelling and used turbulent models. The next part is concerned with the technical description of the Boskovice dam, the creation of virtual 3D model of spillway and spillway chute in the AutoCAD 2020 software and concerned with the control and revision of model in the Blender software. In the end of the thesis are mentioned results of numeric modelling of flow gained from the Flow-3D software and the comparison of results with the research of hydraulic model implemented at Water structures institute of Faculty of Civil Engineering of BUT.

This thesis is divided into two parts, where the first part is focused on an overview and work with 3D software at Czech universities, it includes a comparison of the different programs and description of history of Blender programme which was the one chosen as support for teaching the Modern computer graphics course. The second part of the thesis is more focused on practical matters and describes the basic workings of the programme from the first start up, orientation in the different sections and the settings of the work space for the work itself. The thesis details basic transformation commands of change of location, rotation and change of scale of objects and editing commands like copying, deleting, hiding and duplication of individual objects including their theoretical descriptions. Work with lightings continues after the transformation commands including practical examples of different types of lighting. Work with materials and textures is described in the last two chapters. The goal of this thesis is to describe how to work with the Blender programme and basic work with objects and assigning individual materials and textures for objects and the lighting in a scene for people unfamiliar with the programme.

This diploma thesis describes the application and using of mobile mapping in architecture. After getting to know the mobile mapping system MOMAS, which was developed by Geodis Brno, spol. s.r.o., in this way some localities in Brno were measured. From that measuring was chosen the facade of Dům Milady Horákové, and by post-processing was the facade compiled and created into 3D model. In addition the control measuring was done by non-prism method, following the assessment of accuracy.

This diploma thesis includes progress constructional design of 2 - stroke engine for small mechanization, using modern tools of computer aided design. In the first part is mentioned short summary contemporary types small mechanization with 2 - stroke engines. Follows part devoted conceptual design with calculation of the main dimensions of engine cylinder. After assesment strength load of cranked mechanism, is effected stress analysis of connection rod, whose design and modeling is part of work, how by the help of analytical figures from appropriate literature so by final element method. Last part of those work is estimation results with presentation parameters, which affect power of 2 - stroke engines for small mechanization.