Next Generation networks (3G and beyond) are evolving towards all IP based systems with the aim to provide global coverage. For Mobility in IP based networks, Mobile IPv6 is considered as a standard by both industry and research community, but this mobility protocol has some reliability issues. There are a number of elements that can interrupt the communication between Mobile Node (MN) and Corresponding Node (CN), however the scope of this research is limited to the following issues only: • Reliability of Mobility Protocol • Home Agent Management • Handovers • Path failures between MN and CN First entity that can disrupt Mobile IPv6 based communication is the Mobility Anchor point itself, i.e. Home Agent. Reliability of Home Agent is addressed first because if this mobility agent is not reliable there would be no reliability of mobile communication. Next scenario where mobile communication can get disrupted is created by MN itself and it is due to its mobility. When a MN moves around, at some point it will be out of range of its active base station and at the same time it may enter the coverage area of another base station. In such a situation, the MN should perform a handover, which is a very slow process. This handover delay is reduced by introducing a “make before break” style handover in IP network. Another situation in which the Mobile IPv6 based communication can fail is when there is a path failure between MN and CN. This situation can be addressed by utilizing multiple interfaces of MN at the same time. One such protocol which can utilize multiple interfaces is SHIM6 but it was not designed to work on mobile node. It was designed for core networks but after some modification in the protocol , it can be deployed on mobile nodes. In this thesis, these issues related to reliability of IPv6 based mobile communication have been addressed.

Aujourd’hui, les appareils mobiles sont présents dans le monde entier. Ces appareils permettent aux utilisateurs d'accéder à l’Internet notamment par l'intermédiaire des réseaux WiFi. La diversité et le nombre de déploiements sans coordination centrale (y compris les utilisateurs à leur domicile) conduit à des déploiements qu’on peut qualifier de chaotiques. En conséquence, les réseaux WiFi sont largement déployés avec une forte densité dans les zones urbaines. Dans ce contexte, les utilisateurs et les opérateurs tentent d’exploiter ces déploiements pour obtenir une connectivité omniprésente, et éventuellement d'autres services. Cependant, pour tirer parti de ces déploiements, il faut des stratégies pour identifier les réseaux utilisables et choisir les plus adaptés aux besoins. Pour cela, nous étudions le processus de découverte des réseaux dans le contexte de ces déploiements. Ensuite, nous présentons une plateforme de partage de mesures sans fil, un système d'information collaboratif où les stations mobiles recueillent des mesures du réseau et les envoient à un système central. En rassemblant mesures provenant de différents utilisateurs, la plateforme donne accès à des caractéristiques du déploiement précieuses. Nous évaluons l'utilité de cette plateforme collaborative grâce à deux applications : (1) l’ensemble minimal de points d'accès, afin de réduire l'énergie nécessaire pour offrir une couverture WiFi dans une zone donnée. (2) l'optimisation des paramètres de recherche de réseau, afin de réduire le temps nécessaire pour découvrir les réseaux existants. Ensuite, nous étudions une méthode passive pour déterminer si un réseau fonctionne dans un canal saturé. / Nowadays, mobile devices are present worldwide, with over 4.40 Billion devices globally. These devices enable users to access the Internet via wireless networks. Different actors (e.g., home users, enterprises) are installing WiFi networks everywhere, without central coordination, creating chaotic deployments. As a result, WiFi networks are widely deployed all over the world, with high accesspoint (AP) density in urban areas. In this context, end-users and operators are trying to exploit these dense network deployments to obtain ubiquitous Internet connectivity, and possibly other services. However, taking advantage of these deployments requires strategies to gather and provide information about the available networks. In this dissertation, we first study the network discovery process within the context of these deployments. Then, we present the Wireless Measurements Sharing Platform, a collaborative information system, to which mobile stations send simple network measurements that they collected. By gathering and processing several network measurements from different users, the platform provides access to valuable characteristics of the deployment. We evaluate the usefulness of this collaborative platform thanks to two applications: (1) the minimal access point set, to reduce the energy needed to offer WiFi coverage in a given area.(2) The optimization of the scanning parameters,to reduce the time a mobile station needs for the network discovery. Finally, we describe a method to identify whether an AP operates ina saturated channel, by passively monitoring beacon arrival distribution.

[pt] Sistemas de múltiplas antenas livres de células surgiram recentemente como uma combinação de MIMO massivo, sistemas de antenas distribuídas (DAS) e network MIMO. Esta dissertação explora o downlink deste cenário com pontos de acesso (PAs) de uma ou múltiplas antenas e considerando conhecimento perfeito e imperfeito do canal. São desenvolvidos esquemas que combinam pré-codificação, alocação de potência e seleção de PAs (SPA). Para começar, duas estratégias de SPA foram investigadas, uma baseada em busca exaustiva (BE-SPA) e a outra em coeficientes de desvanecimento de larga escala (LE-SPA), com o intuito de reduzir a complexidade das redes livres de células. Subsequentemente, apresentamos duas técnicas iterativas de pré-codificação, todas seguindo o critério Minimum Mean-Square Error (MMSE), combinadas à restrição de potência total. A primeira nós chamamos de MMSE, com restrição de potência total. Nós também incorporamos robustez ao método desenvolvido chamado RMMSE, um pré-codificador robusto com restrição de potência total. Como terceiro elemento da configuração proposta, esquemas de alocação de potência foram desenvolvidos, com abordagens ótimas, adaptativas e uniformes. Um algoritmo de alocação de potência ótima (APO) é apresentado, baseado na maximização da mínima Signal-to-Interference-plus-Noise Ratio (SINR). A solução adaptativa (APA) é caracterizada pelo gradiente estocástico (GE) do mean-square error (MSE) e a alternativa uniforme (UPA) propõe a equalização de todos os coeficientes de potência. Todas as configurações devem respeitar a restrição de potência por antena, imposta pelo sistema. Uma análise de soma das taxas é feita, para todas as técnicas estudadas e o custo computacional de cada uma delas é calculado. Resultados numéricos provam que as técnicas propostas têm performance superior à pré-codificadores Conjugate Beamforming (CB) e Zero-Forcing (ZF), ambos com alocação de potência uniforme e ótima, na forma de taxa de erro de bit (BER), soma das taxas e mínima SINR. Além disso, os resultados atestam que o desempenho pode ser mantido e até melhorado com a aplicação de SPA. / [en] Cell-Free Massive multiple-input multiple-output (MIMO) systems have emerged in recent years as a combination of massive MIMO, distributed antenna systems (DAS) and network MIMO. This thesis explores the downlink channel of such scenario with single and multiple-antenna access points (APs) and takes into account both perfect and imperfect channel state information (CSI). We propose transmit processing schemes that combine precoding, power allocation and AP selection (APS). To begin with, two APS strategies have been investigated, one based on exhaustive search (ES-APS) and the other on the large-scale fading coefficients (LSAPS), in order to reduce the complexity of cell-free networks. Subsequently, we present two iterative precoding techniques following the minimum meansquare error (MMSE) criterion with total power constraint. The first we call MMSE, with total power constraint. We also incorporate robustness in the developed method, called RMMSE, a robust precoder with total power constraint. As the third element of the proposed schemes, power allocation techniques are developed, with optimal, adaptive and uniform approaches. An optimal power allocation (OPA) algorithm is presented based on the maximization of the minimum signal-to-interference-plus-noise ratio (SINR). The adaptive solution (APA) is characterized by the stochastic gradient of the mean-square error (MSE) and the uniform alternative (UPA) proposes to equalize all power coefficients. All configurations must fulfil an antenna power constraint, imposed by the system. A sum-rate analysis is carried out for all studied techniques and the computational cost of each one is calculated. Numerical results prove that the proposed techniques outperform existing conjugate beamforming (CB) and zero-forcing (ZF) precoders, both with uniform and optimal power allocation, in terms of bit error rate (BER), sum-rate and minimum SINR. Furthermore, we also attest that performance can be maintained or even improved in the presence of APS.