[pt] Um problema inerente ao processo de separação por membranas, mais especificamente a nanofiltração( NF) é a perda de eficiência das membranas com o tempo de operação do sistema, que se deve, em grande parte, ao depósito ou adsorção de material na superfície e/ou poros das membranas. O desenvolvimento de incrustações faz com que o fluxo permeado diminua muito e torna necessário regimes freqüentes de limpeza que ocasionam uma acentuada diminuição na vida útil da membrana. Este estudo enfoca o comportamento de soluções salinas simples, binárias e multicomponentes submetidas a processo de nanofiltração com membrana comercial utilizada em processos de dessulfatação (NF-90-400- Dow) em módulo de placa e quadros com alimentação em fluxo cruzado, condições de pressão elevada e baixa vazão escolhidas de modo a favorecer a formação dos depósitos. A membrana selecionada para o estudo mostrou grande eficiência na eliminação de sulfato tanto para soluções simples como para soluções binárias, foi observado que variação na força iônica afeta a eficiência de remoção de sulfatos das correntes de alimentação e ainda que variações na diferença de pressão aplicada no processo utilizando água do mar sintética como solução de operação afetam de forma significativa as características de incrustação. / [en] Fouling is a problem without a satisfactory solution in nanofiltration process. The fouling development causes low performance and reduction of the membrane time life. The aim of this work was to evaluate the behavior of salts significantly present in the sea water in fouling formation on the membrane surface. A commercial nanofiltration membrane (NF-90-400), which was developed for sulphates removal process, was particularly investigated. The permeation experiments with sulphates solution were carried out during seven days; permeate flux and effluent conductivities were monitored. Temperature, transmembrane pressure, concentration, and flow velocity of the feeding solution were kept in 25ºC, 30 bar, 4.000 mg/L, and 0,030 m/s, respectively. The selected membrane showed great efficiency in the sulphate elimination for simple solutions and for binary solutions, it was observed that variation in the ionic force affects the efficiency of sulphates removal. Variations in DP when the solution of work was synthetic sea water affects in a significant way the incrustation characteristics.

Marine epibenthic communities are influenced by both pre- and post-recruitment processes. For instance, the larval supply and cues that influence settlement (pre-recruitment), as well as the growth and mortality of individuals (post-recruitment), may differ across reef type and depth. Determining the relative influence of these processes is important to understanding how epibenthic communities can develop in a region. Using both a recruitment experiment that controlled grazing by urchins and in situ photographic surveys of epibenthic communities, this study examined the recruitment and composition of epibenthos on natural limestone and artificial reefs in the eastern Gulf of Mexico (eGOM). In the experiment, tiles that were open to urchin grazing had lower percent cover of algae (-12%) and higher cover of crustose coralline algae (CCA) (13%) than those that excluded urchins. Patterns in tile cover were likely the result of CCA either resisting grazing mortality or recolonizing exposed areas after algae were removed. Prevalence of estuarine species on inshore tiles was indicative of variation in recruitment across depth. Urchin density was positively correlated with the structural complexity of the habitats, which was higher on artificial reefs than natural ones, a factor that potentially had important effects on several observed patterns. Results from photographic surveys indicated that natural reef communities had higher algal cover and lower cover of invertebrates (e.g., corals and hydroids) than artificial reefs. These findings were consistent with previous work conducted in both temperate and tropical ecosystems, and suggested that grazing from urchins plays an important role in shaping epibenthic community structure in the subtropical eGOM.

Prevention of the accumulation of undesirable biological material i.e. biofouling upon a solid surface requires the use of antifouling systems. The solid surface may be a contact lens, an off shore oil rig or a living organism. When chemicals are employed as a mechanism of defense against biofouling, the agents involved are known as antifouling agents. Marine algae must protect themselves from fouling organisms and it is thought that one of the mechanisms used by these organisms is the production of secondary metabolites with an array of biological activities. In vitro studies have shown numerous compounds isolated from marine algae to possess antibacterial, antifungal and antimacrofouling activity. The aim of this study was to evaluate the secondary metabolite extracts of selected Southern African marine macro-algae as a potential source of compounds that inhibit biofilm formation and that could be used as antifouling agents. In this project, marine macro-algae were collected from various sites along the South African coastline. Their extracts were screened for antimicrobial activity against four ubiquitous microorganisms, Staphylococcus aureus, Klebsiella pneumoniae, Mycobacterium aurm and Candida albicans. Results of screening assays guided the fractionation of two Rhodophyta, Plocamium corallorhiza and Laurencia flexuosa. The algae were fractionated using silica gel column chromatography and compounds were isolated by semi-preparative normal phase HPLC. Compound characterization was performed using UV, IR and advanced one- and two-dimensional NMR (¹H, ¹³C NMR, COSY, HSQC, HMBC and NOESY) spectroscopy and mass spectrometry. Ten halogenated monoterpenes including four members of the small class of halogenated monoterpene aldehydes were isolated from extracts of P. corallorhiza. The compounds isolated included the known compounds 3,4,6,7-tetrachloro-3,7-dimethyl-1-octene; 4,6-dibromo-1, 1-dichloro-3,7 -dimethyl-2E,7 octadiene; 4,8-d ibromo-1,1,7 -trichloro-3, 7-dimethyl-2,5Eoctadiene;1 ,4,8-tribromo-3, 7 -dichloro-3,7-dimethyl-1 E,5E-octadiene; 8-bremo-6, 7-dichloro-3,7-dimethyl-octa-2E,4E-dienal; 4-Bromo-8-chloro-3,7-dimethyl-octa-2E,6E-dienal; 4,6- Dibromo-3,7-dimethyl-octa-2E,7-dienal; 2,4-dichloro-1-(2-chlorovinyl)-1-methyl-5-methylidene-cyclohexane and two new metabolites 4,8-chloro-3,7-dimethyl-2Z,4,6Z-octatrien-1-al and Compound 3.47. Methodology was developed for the chemical derivatization and mass spectrometric analysis of the aldehydic compounds, The aldehyde trapping reagent 0-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride was used to derivatize the molecules, stabilizing them and allowing for their complete characterization. From Laurencia flexuosa a new cuparene sesquiterpene 4-bremo-2-(5-hydroxy-1,2,2- trimethylcyclopent-3-enyl)-5-methylphenol was isolated along with two geometric isomers of the vinyl acetylene bromofucin , An halogenated monoterpene 3S*,4R*-1-bromo-3,4,8-trichloro-9-dichloromethyl-1-E,5-E,7-Z-octatriene was also isolated but was suspected to be a contaminant and an investigation into its biological source revealed that it originated from Plocamium suhrii. A third alga, Martensia elegans was extracted based on published reports of antimicrobial compounds in related species. A new a-alkyl malate derivative was isolated and characterized. Selected compounds isolated during the course of the study were employed in preliminary assays that tested their ability to inhibit biofilm formation by Pseudomonas aeruginosa. The halogenated monoterpenes isolated from the Plocamium species were the only active compounds. 3S*,4R*-1-bromo-3,4,S-trichloro-g-dichloromethyl-1-E,5-E,7-octatriene from P. suhrii inhibited biofilm formation through antibacterial activity on planktonic cells but could not prevent biofilm formation when employed as a film on the surface of microtitre plate wells. 1,4,8-tribromo-3,7-dichloro-3,7-dimethyl-1E,5E-octadiene and 4,6-dibromo-1,1-dichloro-3,7-dimethyl-2E,7-octadiene inhibited biofilm formation when applied as a film to the microtitre plate wells but had no significant antibacterial activity. No potential antifouling agents were identified in this project but the antimicrobial activity exhibited by the crude algal extracts was highly encouraging and a number of new research areas have been identified. / KMBT_363 / Adobe Acrobat 9.54 Paper Capture Plug-in

Coagulation/flocculation/sedimentation is a common pretreatment process prior to microfiltration (MF) or ultrafiltration (UF) to alleviate membrane fouling, however there has been limited research on floatation as the pretreatment separation process. The main objective of this study is to compare sedimentation with floatation as part of the pretreatment for ultrafiltration of Ottawa River water (ORW) with relatively high natural organic matter (NOM) content. Water samples pretreated at two full-scale plants were subjected to multiple-day UF membrane fouling tests (constant flux with backwash and chemical cleaning) using an automated bench-scale UF hollow fiber membrane system. For all the experiments, the transmembrane pressure (TMP) increased sharply during the beginning of the operation (~10 h), which indicated the adsorption was significant. In the later cycles, the TMP showed a more linear constant increase, which indicated the built up of the cake layers. The total fouling index (TFI), hydraulically irreversible fouling index (HIFI) and chemical irreversible fouling index (CIFI) for floated water were much smaller than those of settled waters during both summer and winter testing. Thus, for this type of water coagulation/floatation pretreatment was superior process compared to coagulation/sedimentation, the decreased fouling appears to be linked to greater hydrophobic NOM removal by the coagulation/floatation. For all the tests, HIFI/TFIs were less than 0.1, which is to mean most of the fouling was reversible by hydraulic backwashing.Large fluctuation of backwash efficiencies with time were found for all the tested waters. Enhanced chemical backwash with 100 ppm chlorine and chemical clean with 0.1N NaOH & 200 ppm chlorine were found to be very effective at reducing fouling for pretreated ORW. As expected longer filtration cycles resulted in greater fouling but with a slightly greater degree of hydraulically reversible fouling.

Reverse osmosis operations are facing persistent fouling phenomenon that has challenged the integrity of these processes. Prediction of fouling potential by measuring a fouling index toward feed water is essential to ensure robust operation. Moreover, employing a reliable fouling index with good reproducibility and precision is necessary. Silt density index (SDI) is considered insufficient in terms of reliability and empirical theory, among other limitations. Nevertheless due its simplicity, SDI measurement is utilized extensively in RO desalination systems. The aim of this research is to assess the reliability of SDI. Methods include the investigation of different SDI membranes and study of the nature of the SDI filtration. Results demonstrate the existence of the membrane properties' variation within manufacturers, which then causes a lack of accuracy in fouling risk estimation. The nature of particles during SDI filtration provides information that particle concentration and size play a significant role on SDI quantification with substantial representation given by particles with size close to membrane nominal pore size. Moreover, turbidity assisted SDI measurements along with determination of UF pretreated and clean water fouling potential, establishes the indication of non-fouling related phenomena involved on SDI measurement such as a natural organic matter adsorption and hydrodynamic condition that alters during filtration. Additionally, it was found that the latter affects the sensitivity of SDI by being represented by some portions of SDI value. Keywords: Reverse Osmosis, Fouling index, Particulate Fouling, Silt Density Index (SDI), and Assessment of SDI.

No description available.

Superhydrophobic and lubricant-infused porous surfaces are two classes of non-wetting surfaces that are inspired by the adaptation of natural surfaces such as lotus leaves, pond skater legs, butterfly wings, and Nepenthes pitcher plant. This dissertation focuses on fabrication and in depth study of bioinspired functional metallic surfaces for applications such as power plant condensers and marine applications. Toward that, first, facile and scalable methods are developed for the fabrication of superhydrophobic surfaces (SHS) and lubricant-infused surfaces (LIS). Second, the corrosion inhibition mechanism of SHS was systematically studied and modeled via electrochemical methods to elucidate the role of superhydrophobicity and other parameters on corrosion inhibition. The anti-corrosion properties of SHS and LIS were systematically studied over a range of temperatures (23°C–90°C) to simulate an actual condenser environment. Moreover, the environment of application often involves using harsh cleaning chemicals. The fabricated non-wetting surfaces were examined over a wide range of acidity and basicity (pH=1 to pH=14). Third, the durability of SHS and LIS is systematically assessed using a set of testing protocols including water impingement tests, scratch wear tests, and accelerated chemical corrosion tests. Considering that industrial environments of application are often turbulent, in addition to static long term corrosion tests, long term dynamic durability was studied in a simulated turbulent condition. Fourth, the performance of the fabricated nonwetting surfaces was systematically studied against calcium sulfate scaling in turbulent conditions and different temperatures. An analytical relationship based on the Hill-Langmuir model is proposed for the prediction of fouling on nonwetting and conventional surfaces alike in dynamic conditions. Overall 1048 individual samples were studied via over 3000 measurements in this dissertation to establish a comprehensive fundamental knowledge base on fabrication and anti fouling characteristics of metallic nonwetting surfaces, which profoundly helps to design appropriate surfaces and fabrication methods based on the use environment. / Doctor of Philosophy / Metallic surfaces such as copper, brass, and aluminum are everywhere in our daily lives. From tumblers, household pipes to the bank of tubes in power plants condensers. Fouling of these surfaces has significant performance and economic impact. Scaling is a type of crystallization fouling like the familiar limescale everyone is familiar to see around the surface of a house kettle. Corrosion is another type of fouling and is detrimental to metallic surfaces. For example, 50% of water consumption in the U.S. is being used in thermo-electric power plants where fouling of metallic surfaces will impede the flow of working fluid, therefore increasing power needed for pumping, decrease efficiency, and decrease ultimate lifetime. One study in 2019 shows corrosion costs 3% of the gross national products of China and it is already known to be similar for other major economies like the USA, which is a hefty cost. Nature has inspired a lot of solutions for mankind. In this work, inspired by natural surfaces such as lotus leaves, butterfly wings, and pond skater legs, a class of superhydrophobic surfaces (SHS) was fabricated. Moreover, a closer look at how the complex human body puts everything in order exposes one of its most striking and essential characteristics: how wet and lubricated its interfaces are. Our lungs, eyes, joints, intestine, bones; either hairy or porous, all are lined wet surfaces that work as fouling inhibitors and defect free surfaces. This also have been observed elsewhere such as on Nepenthes pitcher plant. Inspired by these, another class of non-wetting surfaces, lubricant-infused surfaces (LIS) was fabricated. This dissertation for the first time investigates a rational methodology in the fabrication of metallic SHS and LIS and their anti-scaling and anti-corrosion properties in different environments of application, including a range of temperature (23°Câ€"90°C), various solutions (pH=1 to pH=14), and long-term static and dynamic (turbulent condition) durability. It is believed that this work would profoundly help to identify appropriate nonwetting metallic surfaces based on the intended use environment.

Fouling is a chronic problem in many heat transfer systems and results in the need for frequent heat exchanger (HEX) cleaning. In the dairy industry, the associated operating cost and environmental impact are substantial. Antifouling coatings are one mitigation option. In this work, the fouling behaviour of fluoropolymer, polypropylene and stainless steel heat transfer surfaces in processing raw milk and whey protein solution are studied. Methodologies to assess the economics of antifouling coatings are developed and applied. Two experimental apparatuses were designed and constructed to study fouling at surface temperatures around 90 °C. A microfluidic system with a 650 x 2000 µm flow channel enables fouling studies to be carried out by recirculating 2 l of raw milk. The apparatus operates in the laminar flow regime and the capability to probe the local composition of delicate fouling deposit $\textit{in-situ}$ with histological techniques employing confocal laser scanning microscopy. A larger bench-scale apparatus with a 10 x 42 mm flow channel was built to recirculate 17 l of solution in the turbulent flow regime which is more representative of conditions in an industrial plate HEX. Experimental results demonstrate that fluoropolymer coatings can reduce fouling masses from raw milk and whey protein solution by up to 50 %. Surface properties affect the structure and composition of the deposit. At the interface with apolar surfaces raw milk fouling layers are high in protein, whereas a strongly attached mineral-rich layer is present at the interface with steel. Whey protein deposits generated on apolar surfaces are more spongy and have a lower thermal conductivity and/or density than deposits on steel. The attraction of denatured protein towards apolar surfaces and the formation of a calcium phosphate layer on steel at later stages of fouling are explained with arguments based on the interfacial free energy of these materials in water. The financial attractiveness of coatings is considered for HEX subject to linearly and asymptotically increasing fouling resistance and using a spatially resolved fouling model. An explicit solution to the cleaning-scheduling problem is presented for the case of equal heat capacity flow rates in a counter-current HEX. Scenarios where the use of coatings may be attractive or where there is no financial benefit in cleaning a fouled exchanger are identified. Finally, experimental data are used to estimate the economic potential of fluoropolymer coated HEXs in the ultra-high-temperature treatment of milk. In the considered case, the value of a fluoropolymer coating inferred from the reduction in fouling is estimated to be around 2000 US$/m².

Thesis (MSc)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: This study describes: the evaluation of the current, and potential assay methods for the quantification of cholesterol, cholesteryl esters and free fatty acids in milk and the application thereof ; an account of the difficulties associated with the usage of FoodPro® Cleanline, an enzyme preparation used as processing aid, during ultra-high temperature processing of milk ; the development of activity assays which can be used for the kinetic characterization of glycerophospholipid cholesterol acyltransferase, the active enzyme in FoodPro® Cleanline ; the development of an accurate and facile activity assay, and the validation thereof, which can be used for the validation of enzyme activity prior to dosage of milk with FoodPro® Cleanline. / AFRIKAANSE OPSOMMING: Hierdie studie beskryf: die evaluering van die huidige, en potensiële, metodes vir die kwantifisering van cholesterol, cholesteriel esters en vryvetsure in melk, sowel as die toepassing van hieridie metodes ; 'n verduideliking van die moeilikhede wat ondervind word gedurende die gebruik van FoodPro® Cleanline, 'n ensiempreparaat vir gebruik as 'n verwerkingshulpmiddel, tydens ultrahoë-temperatuurprosessering van melk ; die ontwikkeling van aktiwiteitsbepalings metodes vir gebruik in kinetiese karakterisering van gliserofosfolipied cholesterol asieltransferase, die aktiewe ensiem in FoodPro® Cleanline ; die ontwikkeling van 'n akkurate, eenvoudige aktiwiteitsbepalings metode, en bevestiging van hierdie metode, wat gebruik kan word vir kwalitieitskontrole alvorens die dosering van melk met FoodPro® Cleanline.

No description available.