No description available.

Made available in DSpace on 2014-12-17T15:48:12Z (GMT). No. of bitstreams: 1 LeonardoDO_DISSERT.pdf: 3357434 bytes, checksum: 75c2c837997e2220e8de164c844c9b5d (MD5) Previous issue date: 2014-06-05 / Due to the constantly increasing use of wireless networks in domestic, business and industrial environments, new challenges have emerged. The prototyping of new protocols in these environments is typically restricted to simulation environments, where there is the need of double implementation, one in the simulation environment where an initial proof of concept is performed and the other one in a real environment. Also, if real environments are used, it is not trivial to create a testbed for high density wireless networks given the need to use various real equipment as well as attenuators and power reducers to try to reduce the physical space required to create these laboratories. In this context, LVWNet (Linux Virtual Wireless Network) project was originally designed to create completely virtual testbeds for IEEE 802.11 networks on the Linux operating system. This paper aims to extend the current project LVWNet, adding to it the features like the ability to interact with real wireless hardware, provides a initial mobility ability using the positioning of the nodes in a space coordinates environment based on meters, with loss calculations due to attenuation in free space, enables some scalability increase by creating an own protocol that allows the communication between nodes without an intermediate host and dynamic registration of nodes, allowing new nodes to be inserted into in already in operation network / Com o crescimento constante da utiliza??o de redes sem fio em ambientes dom?sticos, empresariais e at? industriais, aparecem novos desafios. A prototipa??o de novos protocolos nesses ambientes tipicamente ? restrita a ambientes de simula??o, onde existe a necessidade de uma dupla implementa??o, uma no ambiente de simula??o, onde se realiza uma prova de conceito inicial e outra em um ambiente real. Al?m disso, uma vez que se parta para ambientes reais, n?o ? trivial a cria??o de um testbed para redes sem fio de alta densidade, dada a necessidade de uso de v?rios equipamentos reais, e uso de atenuadores, redutores de pot?ncia, para tentar reduzir o espa?o f?sico necess?rio para cria??o desses laborat?rios. Nessa lacuna, o projeto LVWNet (Linux Virtual Wireless Network) foi inicialmente concebido para cria??o de testbeds completamente virtuais para redes IEEE 802.11 sobre o sistema operacional Linux. Este trabalho tem como objetivo extender o atual projeto LVWNet adicionando a ele os recursos de possibilitar a intera??o com hardwares wireless reais, dar um suporte inicial ? mobilidade atrav?s do posicionamento dos n?s em um ambiente de coordenadas no espa?o baseado em metros, j? com c?lculos de perda decorrente da atenua??o em espa?o livre, aumentar a escalabilidade com a cria??o de um mecanismo que permita a comunica??o direta entre os n?s sem necessidade de um host intermedi?rio al?m do registro din?mico de n?s, de modo que novos n?s podem ser inseridos na rede com a mesma j? em opera??o

Le travail de cette thèse est consacré à l’étude et l’optimisation d’un cas particulier de la diffusion des ondes électromagnétiques. Elle porte plus particulièrement sur un phénomène appelé le « jet photonique ou jet électromagnétique (jet EM)». Il s’agit d’un faisceau de lumière étroit et concentré en champ proche avec des caractéristiques physiques remarquables. Dans ce travail, un guide d’onde terminé par un embout de forme particulière est utilisé pour générer le jet photonique. Cette thèse a pour objectif l’étude, la caractérisation expérimentale et l’optimisation de jets photoniques pour des applications dans le domaine optique et hyperfréquences. Une méthode robuste et rapide a été développée pour calculer le champ électromagnétique généré par un objet diélectrique ou en sortie d’un guide d'onde avec un embout de forme particulière. Elle est basée sur la Méthode d'Equation Intégrale aux Frontière (MEIF) qui utilise la seconde identité Green. La caractérisation expérimentale des jets photoniques a été réalisée dans le domaine micro-ondes à des fréquences autour de 30 GHz. La possibilité de générer un jet simple et double en utilisant un guide d’onde à embout a été montrée expérimentalement et théoriquement par la méthode MEIF. Les jets EM simples et doubles ont été utilisés pour la détection d’objets métalliques de taille plus petite que la longueur d’onde et l'imagerie en champ proche à travers des structures optiquement opaques. Une procédure d’optimisation basée sur le couplage entre la MEIF et les algorithmes génétiques a été mise au point afin de générer des jets photoniques avec des caractéristiques a priori bien définie. Des optimisations des jets photoniques générés par un objet diélectrique et en sortie d’un guide d’onde avec embout ont été effectuées pour la micro-gravure laser et l’imagerie HF / The work of this thesis is devoted to the study and optimization of a particular case of the scattering of electromagnetic waves. Particularly, it is about a phenomenon called the "photonic jet or electromagnetic jet (EM jet)". This is a narrow light beam concentrated in near-field with remarkable physical characteristics. In this work, a waveguide terminated by a tip with special form is used to generate the photonic jet. This thesis performs the electromagnetic modeling, the experimental characterization and the optimization of photonic jets for applications in optic and microwave field. A robust and fast method was developed to calculate the electromagnetic field generated by a dielectric object or by a waveguide terminated with a tip. It is based on the boundary integral equation method (BIEM) which uses the second Green identity. Experimental characterization of photonic jets was conducted in the microwave field around 30 GHz. The ability to generate a single and double EM jet using a tipped waveguide has been shown experimentally and theoretically by BEIM method. The single and double EM jets were used for the detection of metal objects with a size smaller than the wavelength and for imaging through opaque structures in near field. An optimization procedure based on the coupling between the BEIM and genetic algorithms has been developed to generate photonic jets with properties well defined. Optimizations of photonic jets generated by a dielectric object and by a tipped waveguide have been realized for laser micro-etching and RF imaging

This Master’s thesis analizes technologies suitable for metropolitan area networks. In this thesis there are mentioned technologies used for wireless transfer with speeds above 1 Gbps. There are described basic features and parameters of microwave radio relay links in 70/80GHz range and free space optic links. These technologies are compared with classic optical networks. Practical part of thesis was focused on development of application which calculates signal attenuation caused by the passage of the atmosphere for both technologies. Results gained from this application are mentioned in this Master’s thesis.

The aim of this thesis is to study the methods of a free space optical link design and its application in the communication technologies. The thesis describes possible intrusive influences on the transmitted optical signal, which are the signal noise, atmospheric attenuation and atmospheric turbulences. The thesis is particulary focused on the influence of the atmospheric turbulences and atmospheric attenuation on the optical beam.

The dissertation thesis deals with a free space optical links, especially is focused directly to the transmission optical beams. The influence of environmental conditions like atmospheric turbulence, buildings movement and vibration is described. As a possibility to reduce these undesirable influences, the generation of the transmission beam by the help of the two-mode optical fiber is proposed. A possibility to drive the shape of the resulting transmission beam by means of the change of power ration of individual modes in fiber is described. The coherence features of the proposed beam are analyzed considering the possibility to reduce the influence of atmospheric turbulence. In the thesis there are introduced beam quality parameters that enable to evaluate the quality of the optical beam for the free space optical link. These parameters give the relationship between the shape of the optical beam and the power balance of the optical link and the statistical evaluation of the optical link.

Most modern clock and data recovery circuits (CDR) are based on analog blocks that need to be redesigned whenever the technology process is to be changed. On the other hand, CDR based blind oversampling architecture (BO-CDR) can be completely designed in a digital process which makes its migration very simple. The main disadvantages of the BO-CDR that are usually mentioned in a literature are complexity of its digital circuitry and finite phase resolution resulting in larger jitter sensitivity and higher error rate. This thesis will show that those problems can be solved by designing a new algorithm of BO-CDR and subsequent optimization. For this task an FPGA was selected as simulation and verification platform. This enables to change parameters of the optimized circuit in real time while measuring on real links (unlike a simulation using inaccurate link models). The output of this optimization is a new BO-CDR algorithm with heavily reduced complexity and very low error rate. A new FPGA-based method of jitter measurement was developed (primary for CDR analysis), which enables a quick link characterization without using probing or additional equipment. The new method requires only a minimum usage of FPGA resources. Finally, new measurement equipment was developed to measure bit error distribution on FSO links to be able to develop a suitable error correction scheme based on ARQ protocol.

[pt] Dois dispositivos de contagem de fótons únicos, sensíveis a comprimentos de onda no infravermelho próximo e médio, são propostos e experimentalmente investigados. Ambos utilizam uma técnica de dois estágios, composta de uma etapa inicial de conversão de freqüências em um cristal não-linear seguida de detecção por um fotodiodo avalanche de silício. Enquanto o primeiro projeto é voltado à detecção de fótons únicos a 1.55 μm para comunicações quânticas via fibra óptica, usando um processo intra-cavidade, o segundo projeto prevê o desenvolvimento de um contador de fótons operando a 4.65 μm para sistemas de espaço livre. Neste caso, um estudo de viabilidade para um sistema prático de criptografia quântica operando em um comprimento de onda no infravermelho médio é realizado. Os resultados mostram que, usando a tecnologia disponível na atualidade, tal sistema pode ser construído, embora sua utilidade se mostre restrita a enlaces possuindo certas condições meteorológicas específicas. / [en] Two single photon counting devices, operating at near- and mid-infrared wavelengths, are introduced and experimentally investigated. Both use a twostage technique, comprised of an initial frequency up-conversion procedure inside a nonlinear crystal followed by a silicon avalanche photodiode. Whereas the first project consists on detection of single photons at 1.55 ìm for fiber-optic-based quantum communications, using a cavity-enhanced procedure, the second project envisions the development of a single-photon counter operating at 4.65 ìm for free-space systems. In this case, a feasibility study for a practical quantum key distribution system operating in a mid-infrared wavelength is performed. The results show that, using present-day technology, such a system can be constructed, albeit its usefulness would be restricted to operation under very specific weather conditions.

No description available.

[ES] Las comunicaciones ópticas inalámbricas (OWC) constituyen una tecnología muy prometedora para el desarrollo de futuras comunicaciones inalámbricas. De hecho, ha despertado un interés creciente entre los investigadores y varias empresas de todo el mundo trabajan actualmente en el desarrollo de redes inalámbricas de muy alta velocidad. Las comunidades científica e industrial consideran la OWC como una tecnología complementaria en sus diversas formas: comunicaciones ópticas en el espacio libre (FSO), comunicaciones de luz visible (VLC) o fidelidad de la luz (Li-Fi). El espectro óptico ha sido considerado durante muchos años como una gran oportunidad para las comunicaciones inalámbricas, especialmente debido a la saturación del espectro de radiofrecuencia (RF). Esta disertación trata del uso de fuentes de banda ancha en sistemas de transmisión de luz visible (VLC), así como en sistemas de transmisión en el espectro infrarrojo por fibra óptica. En el trabajo de investigación realizado se pueden distinguir tres partes: En la primera parte, se considera el estudio y la simulación de componentes de Diodos Emisores de Luz (LED) con el software WIEN2k centrándose en las propiedades ópticas y eléctricas de los elementos II-VI. La segunda parte trata del diseño, la implementación y las pruebas de diferentes prototipos de comunicación VLC para la transmisión analógica y digital en modo simplex y semidúplex. Hemos demostrado un sistema OWC empleando una fuente de banda ancha (LED) para la transmisión no sólo de datos, sino también para la transmisión inalámbrica de energía. Además, se aborda el problema de la sincronización y la detección del nivel "1" o "0" de un bit en los sistemas de comunicación inalámbrica óptica implementados que surge como consecuencia de la atenuación de la luz a lo largo de la distancia y al problema de la pérdida de línea de visión (NLOS) entre el emisor y el receptor. Para hacer frente a este problema, se ha proporcionado un protocolo de comunicación que garantiza la transmisión fiable de datos digitales con un algoritmo de detección de nivel de bits adaptativo y se ha demostrado su eficacia mediante la transmisión de textos e imágenes. Además, esta tesis aporta una solución para la implementación de transmisores multiplexados en redes con división de longitud de onda (WDM) para formatos de modulación con multiplexación por división de frecuencia ortogonal (OFDM) basados en el uso de fuentes de banda ancha en el espectro infrarrojo para redes de fibra bidireccionales centralizadas. A pesar de las limitaciones impuestas por la dispersión cromática en el uso de este tipo de fuentes ópticas, la inclusión de ciertas estructuras antes de la detección permite la transmisión de señales OFDM en enlaces ópticos. En este trabajo se ha demostrado experimentalmente la reutilización de portadoras, la asignación dinámica de ancho de banda y la transmisión de señales OFDM multibanda mediante el uso de fuentes ópticas de banda ancha en redes WDM. Los principales resultados obtenidos en cada parte de esta tesis doctoral muestran los procedimientos de estudio, la eficacia de las soluciones propuestas y las limitaciones encontradas. / [CA] Les comunicacions òptiques sense fils (OWC) constitueixen una tecnologia molt prometedora per al desenvolupament de futures comunicacions sense fils. De fet, ha despertat un interés creixent entre els investigadors i diverses empreses de tot el món treballen actualment en el desenvolupament de xarxes sense fils de molt alta velocitat. Les comunitats científica i industrial consideren la OWC com una tecnologia complementària en les seues diverses formes: comunicacions òptiques en l'espai lliure (FSO), comunicacions de llum visible (VLC) o fidelitat de la llum (Li-Fi). L'espectre òptic ha sigut considerat durant molts anys com una gran oportunitat per a les comunicacions sense fils, especialment a causa de la saturació de l'espectre de radiofreqüència (RF). Aquesta dissertació tracta de l'ús de fonts de banda ampla en sistemes de transmissió de llum visible (VLC), així com en sistemes de transmissió en l'espectre infraroig per fibra òptica. En el treball de recerca realitzat es poden distingir tres parts: ¿ En la primera part, es considera l'estudi i la simulació de components de Díodes Emissors de Llum (LED) amb el software WIEN2k centrant-se en les propietats òptiques i elèctriques dels elements II-VI. ¿ La segona part tracta del disseny, la implementació i les proves de diferents prototips de comunicació VLC per a la transmissió analògica i digital de manera simplex i semidúplex. Hem demostrat un sistema OWC emprant una font de banda ampla (LED) per a la transmissió no sols de dades, sinó també per a la transmissió sense fil d'energia. A més, s'aborda el problema de la sincronització i la detecció del nivell "1" o "0" d'un bit en els sistemes de comunicació sense fil òptica implementats, que sorgeix a conseqüència de l'atenuació de la llum al llarg de la distància i al problema de la pèrdua de línia de visió (NLOS) entre l'emissor i el receptor. Per a fer front a aquest problema, s'ha proporcionat un protocol de comunicació que garanteix la transmissió fiable de dades digitals amb un algorisme de detecció de nivell de bits adaptatiu i s'ha demostrat la seua eficàcia mitjançant la transmissió de textos i imatges. ¿ A més, aquesta tesi aporta una solució per a la implementació de transmissors multiplexats en xarxes amb divisió de longitud d'ona (WDM) per a formats de modulació amb multiplexació per divisió de freqüència ortogonal (OFDM) basats en l'ús de fonts de banda ampla en l'espectre infraroig per a xarxes de fibra bidireccionals centralitzades. Malgrat les limitacions imposades per la dispersió cromàtica en l'ús d'aquest tipus de fonts òptiques, la inclusió d'unes certes estructures abans de la detecció permet la transmissió de senyals OFDM en enllaços òptics. En aquest treball s'ha demostrat experimentalment la reutilització de portadores, l'assignació dinàmica d'amplada de banda i la transmissió de senyals OFDM multibanda mitjançant l'ús de fonts òptiques de banda ampla en xarxes WDM. Els principals resultats obtinguts en cada part d'aquesta tesi doctoral mostren els procediments d'estudi, l'eficàcia de les solucions proposades i les limitacions trobades. / [EN] Optical wireless communication (OWC) is a very promising technology for future wireless communications developments. It has attracted increasing interest from researchers and several companies around the world are currently working on the development of very high-speed wireless networks. The scientific and industrial communities believe that OWC will be a complementary technology in its various forms: Free Space Optical communications (FSO), Visible Light Communications (VLC), Light Fidelity (Li-Fi). In fact, the optical spectrum has been considered for many years as a great opportunity for wireless communications especially due to the saturation of the radio frequency (RF) spectrum. This dissertation deals with the use of broadband sources in visible light transmission systems (VLC) as well as fiber optic systems. To carry out the research, three parts can be distinguished: In the first part, we consider the study and simulation of Light Emitting Diode (LED) components with the WIEN2k software by focusing on the optical and electrical properties of elements II-VI. The second part deals with the design, implementation and testing of different VLC communication prototypes for analog and digital transmission in simplex and half-duplex mode. We have demonstrated that an OWC system using a broadband source (i.e. an LED) can be used not only for data transmission, but also for wireless power transmission. Moreover, the synchronization problem and the detection of level "1" or "0" of a bit often arise in the optical wireless communication systems. This is a result of the attenuation nature of the light over the distance and the problem of Non Line-Of-Sight (NLOS) between the emitter and the receiver. To deal with this problem, a communication protocol ensuring reliable digital data transmission with an adaptive bit level detection algorithm has been provided and its effectiveness has been demonstrated by the transmission of texts and images. In addition, this thesis provides a solution for the implementation of wavelength division multiplexed - orthogonal frequency division multiplexed (WDM-OFDM) transmitters based on the use of broadband sources in the infrared spectrum for centralized bidirectional fiber networks. Despite the chromatic dispersion that avoids the use of this type of optical sources, the inclusion of certain structures before detection allows the transmission of OFDM signals in optical links. Carrier reuse, dynamic bandwidth allocation and multiband OFDM signals transmission will be experimentally demonstrated by using optical broadband sources in WDM networks. The main results obtained during this thesis work demonstrate the study procedures, for each part, the effectiveness of the proposed solutions as well as the constraints encountered. / Sekkiou, I. (2021). Design of communication systems based on broadband sources for fiber and free space optical links [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/172542