L'objectif de cette thèse est d'exploiter les phénomènes des ondes de fuite pour améliorer les performances des antennes classiques à ouverture pour les applications spatiales. Ici, nous considérons des configurations planaires où les ondes de fuite sont excitées entre un plan de masse et un superstrat partiellement réfléchissant. Des réseaux de petites ouvertures sur le plan de masse sont utilisés pour alimenter les antennes considérées. Les structures avec superstrat sont développées en configuration réseaux simples ou réseaux à commande de phase, considérées intéressantes en termes de flexibilité du système pour des liens satellitaires de nouvelle génération.Pour étudier efficacement ces antennes, nous avons développé un outil d'analyse basé sur une approche spectrale avec fonction de Green. Cet outil permet d'analyser les structures proposées en prenant en compte l'impact du couplage mutuel entre les éléments sur les performances de rayonnement avec une réduction du temps de calcul et d'utilisation de mémoire.L'augmentation du gain des structures à ondes de fuite peut ouvrir la voie à la réduction du nombre d'éléments des réseaux associés, et donc des commandes en amplitude et phase. Dans une configuration à ondes de fuite, chaque élément du réseau rayonne avec une ouverture équivalente plus grande, augmentant ainsi l'espacement entre les éléments sans affecter le gain global de la structure. Comme largement expliqué dans le manuscrit, les solutions à ondes de fuite représentent par conséquent un avantage majeur pour les antennes du segment utilisateur.En plus de l'amélioration du gain, la technologie à ondes de fuite peut être efficacement exploitée pour synthétiser le diagramme de rayonnement, en choisissant correctement les paramètres de conception de l'antenne. Cette caractéristique peut être utilisée dans les réseaux à commande de phase, pour produire un diagramme d'élément qui minimise les pertes par dépointage et qui filtre les lobes de réseaux. Une procédure de synthèse pour des antennes réseaux raréfiés à ondes de fuite est ainsi présentée dans le manuscrit, ainsi qu'une nouvelle configuration de réseaux avec superstrat irrégulier. Ce dernier permet de réduire les lobes secondaires de l'antenne en utilisant une excitation uniforme. Cette dernière configuration montre clairement que la capacité de modifier le diagramme de rayonnement est la caractéristique la plus attrayante des antennes planaires à ondes de fuite, pour être utilisée dans des solutions de réseaux à commande de phase. / The objective of this thesis is to exploit the leaky-wave phenomena to enhance the performance of classical aperture antennas for space applications. Here, we consider planar configurations where the leaky modes are excited between a ground plane and a partially reflective superstrate. Arrangements of small apertures opening on the ground plane are used to feed the antennas under study. The superstrate-like leaky-wave structures are developed in array or phased array configurations, considered of interest in terms of flexibility of the system for next generation satellite links. In order to efficiently study planar leaky-wave arrays, we have developed an analysis tool based on a Green's function spectral approach. The developed tool allows to precisely analyze the proposed structure by taking into account the impact of the mutual coupling among the elements on the radiation performance of the whole antenna. In addition, it can handle extremely large structures in terms of wavelengths with a small computational effort with respect to commercial tools. In particular, the gain enhancement of leaky-based structures can pave the way to the reduction of the number of elements of the associated phased arrays. In a leaky-wave configuration each element of the array will radiate with a larger equivalent aperture allowing a larger spacing among elements without affecting the final gain of the whole structure. This aspect is particularly important in the case of phased arrays, where phase shifters and control cells are, typically, the most expensive components of the system. As extensively explained in the manuscript, antennas for user segment might find the highest benefit by using leaky-wave solutions. Besides the gain enhancement, the leaky-wave technology can be effectively exploited to conveniently shape the radiation pattern by properly engineering the design parameters of the antenna. This capability can be used in phased arrays to generate a convenient element pattern to minimize the scan losses and filter the grating lobes appearing in the visible space when dealing with periodicities larger than a wavelength. Therefore, a synthesis procedure for thinned leaky-wave arrays is presented in the manuscript. Also, a novel array configuration, the irregular superstrate array, is presented. The irregular superstrate allows the reduction of the side lobes of the antenna below -20 dB in the considered 2.5 % band, using a uniform excitation. This last configuration clearly shows that the shaping capability of leaky-wave antennas is the most appealing feature to be used in phased array solutions.

abstract: Articially engineered two-dimensional materials, which are widely known as metasurfaces, are employed as ground planes in various antenna applications. Due to their nature to exhibit desirable electromagnetic behavior, they are also used to design waveguiding structures, absorbers, frequency selective surfaces, angular-independent surfaces, etc. Metasurfaces usually consist of electrically small conductive planar patches arranged in a periodic array on a dielectric covered ground plane. Holographic Articial Impedance Surfaces (HAISs) are one such metasurfaces that are capable of forming a pencil beam in a desired direction, when excited with surface waves. HAISs are inhomogeneous surfaces that are designed by modulating its surface impedance. This surface impedance modulation creates a periodical discontinuity that enables a part of the surface waves to leak out into the free space leading to far-eld radia- tion. The surface impedance modulation is based on the holographic principle. This dissertation is concentrated on designing HAISs with Desired polarization for the pencil beam Enhanced bandwidth Frequency scanning Conformity to curved surfaces HAIS designs considered in this work include both one and two dimensional mod- ulations. All the designs and analyses are supported by mathematical models and HFSS simulations. / Dissertation/Thesis / Doctoral Dissertation Electrical Engineering 2017

abstract: Impedance-modulated metasurfaces are compact artificially-engineered surfaces whose surface-impedance profile is modulated with a periodic function. These metasurfaces function as leaky-wave antennas (LWAs) that are capable of achieving high gains and narrow beamwidths with thin and light-weight structures. The surface-impedance modulation function for the desired radiation characteristics can be obtained using the holographic principle, whose application in antennas has been investigated extensively. On account of their radiation and physical characteristics, modulated metasurfaces can be employed in automotive radar, 5G, and imaging applications. Automotive radar applications might require the antennas to be flush-mounted on the vehicular bodies that can be curved. Hence, it is necessary to analyze and design conformal metasurface antennas. The surface-impedance modulation function is derived for cylindrically-curved metasurfaces, where the impedance modulation is along the cylinder axis. These metasurface antennas are referred to as axially-modulated cylindrical metasurface LWAs (AMCLWAs). The effect of curvature is modeled, the radiation characteristics are predicted analytically, and they are validated by simulations and measurements. Communication-based applications, like 5G and 6G, require the generation of multiple beams with polarization diversity, which can be achieved using a class of impedance-modulated metasurfaces referred to as polarization-diverse holographic metasurfaces (PDHMs). PDHMs can form, one at a time, a pencil beam in the desired direction with horizontal polarization, vertical polarization, left-hand circular polarization (LHCP), or right-hand circular polarization (RHCP). These metasurface antennas are analyzed, designed, measured, and improved to include the ability to frequency scan. In automotive radar and other imaging applications, the performance of metasurface antennas can be impacted by the formation of standing waves due to multiple reflections between the antenna and the target. The monostatic RCS of the metasurface antenna is reduced by modulating its surface impedance with a square wave, to avert multiple reflections. These square-wave-modulated metasurfaces are referred to as checkerboard metasurface LWAs, whose radiation and scattering characteristics, for normal incidence parallel polarization, are analyzed and measured. / Dissertation/Thesis / Doctoral Dissertation Electrical Engineering 2020

Various anomalous effects that emerge when the interfaces between media are involved in sound-matter or light-matter interactions are studied. The three specific systems examined are a fluid channel between elastic metal plates, a linear chain of metallic perforated cylindrical shells in air, and a metal-dielectric slab with the interfaces treated as finite regions of smoothly changing material properties. The scattering of acoustic signals on the first two is predicted to be accompanied by the effects of redirection and splitting of sound. In the third system, which supports the propagation of surface plasmons, it is discovered that the transition region introduces a nonradiative decay mechanism which adds to the plasmon dissipation. The analytical results are supported with numerical simulations. The outlined phenomena provide the ideas and implications for applications involving manipulation of sound or excitation of surface plasmons.

[pt] Este trabalho tem como objetivo apresentar o desenvolvimento de uma antena HAIA (Holographic Artificial Impedance Antenna) para potenciais aplicações em sistemas de satélites nas bandas X (8 - 12 GHz) e Ku (12 - 18 GHz), bem como na frequência de terahertz. Como prova de conceito, o protótipo é criado para operar na banda K (18 - 27 GHz), especificamente na frequência de 18,4 GHz. O HAIA é um tipo de antena com ondas vazadas, com um princípio operacional único para radiação de feixe controlado. Devido às suas amplas propriedades de radiação, o grau de liberdade do projeto nos permite explorar o comportamento de resposta da antena e diferentes parâmetros para sua modelagem são estudados. O projeto da antena obedece à teoria estabelecida para a radiação de ondas vazadas na conversão de uma onda de superfície para uma onda com vazamento, onde uma AIS (Artificial Impedance Surface) é caracterizada e distribuída em um substrato dielétrico usando o princípio holográfico desenvolvido no sistema óptico. A fim de minimizar as dimensões da antena, uma fonte planar é estudada para gerar uma onda de superfície e comparada com o desempenho da alimentação de onda de superfície convencional neste tipo de estrutura. Os diferentes projetos são avaliados para a conclusão do melhor resultado e comparados com outros trabalhos. O protótipo final é fabricado para testes experimentais, onde os resultados provam que a antena projetada responde às características modeladas, com uma boa concordância entre os resultados simulados e medidos. / [en] This work aims to present the development of a holographic artificial impedance antenna (HAIA) for potential applications in satellite systems in the X (8 - 12 GHz) and Ku (12 - 18 GHz) bands, as well as in the frequency of terahertz. As a proof of concept, the prototype is created to operate in the K (18 - 27 GHz) band, specifically at the design frequency of 18.4 GHz. HAIA is a kind of leaky-wave antenna (LWA) with a unique operating principle for controlled beam radiation. Due to their radiation characteristics are broad, and the degree of design freedom allows us to explore the antenna performance, different parameters are studied for modeling. The antenna design obeys the established theory for the leaky-wave radiation in the conversion of a surface wave into a leaky-wave, where an artificial impedance surface (AIS) is characterized and distributed on a dielectric substrate using the holographic principle developed in the optical system. In order to minimize the dimensions of the HAIA, a planar surface wave launcher is studied and compared with the performance of conventional surface wave feeding used in this type of structure. A series of designs are evaluated for the conclusion of the best result and compared with other works. The final prototype is manufactured for experimental tests, where the results show that the designed antenna responds to the modeled characteristics with a good agreement between the simulated and measured results.

La focalisation du champ électromagnétique dans les zones de champ proche et lointain est un sujet de forte actualité pour l'imagerie médicale et la radiométrie des microondes jusqu'aux ondes millimétriques. Dans ce cadre, la théorie des ondes de fuite est un formalisme élégant qui permet de décrire d'une même façon les problèmes radiatifs en champ proche et en champ lointain des microondes aux fréquences optiques. Dans cette thèse, on utilise la polyvalence de la théorie des ondes de fuite pour développer des systèmes rayonnants complexes afin de contrôler les caractéristiques radiatives en champ lointain aux fréquences submillimétriques et pour focaliser la radiation électromagnétique en champ proche aux fréquences millimétriques. Ainsi, l'utilisation de matériaux uniques comme le graphène et les cristaux liquides ont été considérés pour la conception des antennes à ondes de fuite, en obtenant des résultats très intéressants en termes de reconfigurabilité, d'efficience et de directivité. Dans ce contexte, une analyse théorique originale a fourni de nouvelles formules pour l'évaluation des caractéristiques radiatives (c.à.d. la largeur de faisceau, le niveau des lobes secondaires, etc.) des antennes à ondes de fuite. En effet, la largeur du faisceau de ces antennes est, jusqu'à présent, estimée au moyen des formules proposées pour la première fois dans les années '60 par Prof. Arthur A. OLINER. Ces formules ne tiennent en compte ni de la longueur de l'antenne (sauf pour des cas très particuliers), ni du rayonnement longitudinal, elles ne permettent donc pas une évaluation rigoureuse.En complément à la reconfigurabilité en champ lointain, les ondes de fuite offrent aussi la possibilité de focaliser la radiation en champ proche. Dans ce cas, on voit que les ondes de fuite peuvent être utilisées d'une façon efficace pour générer des faisceaux non diffractifs de Bessel à travers des systèmes rayonnants à bande étroite aux ondes millimétriques. De plus, le caractère non diffractif des faisceaux de Bessel peut aussi être utilisé pour générer des impulsions très localisées (comme les solitons en optiques) à travers la superposition continue des faisceaux de Bessel sur une large bande de fréquence. Dans ce cadre, une nouvelle formulation a été développée afin de comprendre les limitations physiques et technologiques concernant la génération des impulsions non diffractives et non dispersives, c.à.d. les X-waves. Les résultats ont montré qu'un type de systèmes rayonnants à large bande, notamment les antennes RLSA (en anglais « Radial Line Slot Array »), semblent très favorables pour la génération des X-waves. / In recent years, microwave, millimeter-wave, and THz applications such as medical and security imaging, wireless power transfer, and near-field focusing, just to mention but a few, have gained much attention in the area of ICT due to their potentially high social impact. On one hand, the need of highly-directive THz sensors with tunable radiating features in the far-field region has recently boosted the research activity in the design of flexible, low-cost and low-profile devices. On the other hand, it is of paramount importance to focus energy in the near-field region, and thus the generation of limited-diffraction waves in the microwave and millimeter-wave regime is a topic of recent increasing interest. In this context, leaky-wave theory is an elegant and extremely useful formalism which allows for describing in a common fashion guiding and radiating phenomena in both the near field and the far field, spanning frequencies from microwaves to optics passing through THz. In this PhD thesis we aim to exploit the intrinsic versatility of the leakywave approach to design advanced radiating systems for controlling the far-field radiating features at THz frequencies and for focusing electromagnetic radiation in the near field at millimeter waves. Specifically, the use of relatively new materials such as graphene and liquid crystals has been considered for the design of leaky-wave based radiators, achieving very promising results in terms of reconfigurability, efficiency, and radiating capabilities. In this context, an original theoretical analysis has provided new general formulas for the evaluation of the radiating features (e.g., half-power beamwidth, sidelobe level, etc.) of leaky-wave antennas. Indeed, the current formulations are based on several simplifying hypotheses which do not allow for an accurate evaluation of the beamwidth in different situations. In addition to the intriguing reconfigurable capabilities offered by leaky waves in far-field applications, interesting focusing capabilities can be obtained in the near field. In particular, it is shown that leaky waves can profitably be used to generate limited-diffraction Bessel beams by means of narrow-band radiators in the microwave range. Also, the use of higherorder leaky-wave modes allows for achieving almost the same performance in the millimeter-wave range, where previous designs were subjected to severe fabrication issues. Even more interestingly, the limited-diffractive character of Bessel beams can also be used to generate limited-diffraction pulses as superpositions of monochromatic Bessel beams over a considerable fractional bandwidth. In this context, a novel theoretical framework has been developed to understand the practical limitations to efficiently generate limited-diffraction, limited-dispersion pulses, such as X-waves, in the microwave/millimeter-wave range. As a result of this investigation, a class of wideband radiators has been thoroughly analyzed, showing promising capabilities for the generation of both zeroth-order and higher-order Xwaves. The latter may pave the way for the first localized transmission of orbital angular momentum in the microwave range.