Multiphase machines have gained a lot of popularity during the recent years, as they offer certain benefits over their three- phase counterparts. This work investigates the losses of a six- phase drive system for a marine application when supplied by four different switching patterns (also referred to as modulators). Using MATLAB/SIMULINK, a model was built for the machine featuring three independent frames and a nonlinear, cross coupled flux relation. It has been connected with the corresponding modulator models, where two carrier based modulators have been developed as well as two space vector modulators. The simulation data was then fed into the loss model to calculate the corresponding losses in both machine and converter. This work shows that control of the harmonics – mainly the fifth – is beneficial to reduce losses, mainly in the machine. Without control, harmonic currents cause unnecessary losses. As none of the investigated modulators strictly dominates all others, this work suggests a combination of the two carrier based methods to create a simple and robust modulator, which offers both a high voltage magnitude and control over the fifth harmonic. / Flerfasmaskiner har blivit mycket populära under dem sestate åren, då de erbjuder specifika fördelar jämfört med trefasmaskiner. Denna avhandling undersöker förlusterna för en sexfasmakin för en maritim applikation när den är kopplad med fyra olika modulatorer. En modell för maskinen byggdes i MATLAB/SIMULINK som innehåller tre oberoende nivåer samt en ickelinjär och korskopplad flödesrelation. Maskinmodellen har blivit kopplad till de fyra korresponderande modulatormodellerna, där två är baserade på bärvågor samt de resterande två är baserade på rymdvektormodulation. Data erhållen från den simulerade maskinmodellen var sedan inmatad in i en förlustmodell för att beräkna de korresponderande förlusterna för både maskinen och omvandlare. Denna avhandling visar att kontroll av övertoner – i huvudsak den femte övertonen – är fördelaktigt för att minimera förluster, främst i maskinen. Eftersom ingen av de modulatorerna som undersöktes i avhandlingen är bäst i alla funktioner, föreslår avhandlingen en kombination av de två bärvågsberoende metoderna. Den nya modulatorn antas vara bra både i kontrol över den femte övertonen men också erbjuda en hög spänning tack vare hamonisk injektion. Dessutom är modulatorn enkelt och robust, eftersom det är bärvågberoende.

My dissertation scrutinizes the implications of a harmonized European corporate tax system for firms' and businesses' decision-making. Specifically, I examine the cross-border consolidation of profits and losses, the design of the apportionment formula applied to allocate the consolidated tax base to single group entities, and the locational investment decisions that are mainly driven by the consolidation of the tax base and its allocation to the group entities. All of my analyses are conducted using model-theoretical methods and simulations, a partial equilibrium business perspective is maintained throughout. (author's abstract)

Call number: LD2668 .T4 1986 D52 / Master of Science / Animal Sciences and Industry

Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: Cooling tower inlet losses and effective flow diameter under no crosswind conditions and the pressure distribution around a circular cylinder subjected to a crosswind are modelled using CFD. The CFD model used to evaluate the inlet losses is validated with data measured in an experimental cooling tower sector model and data obtained from literature. The effect of different inlet geometries on the inlet loss coefficient and the effective diameter are investigated in order to improve cooling tower inlet designs. CFD models are developed to investigate the pressure distribution around infinite and finite circular cylinders. The infinite cylinder is modelled with a smooth surface and a rough surface so that the results can be compared to experimental data from literature. Ultimately a finite cylinder model with a rough surface is developed and the results are compared to experimental data from literature. / AFRIKAANSE OPSOMMING: Koeltoring inlaatverlies en effektiewe vloei deursnit onder geen teenwind toestande en die drukverdeling rondom ‘n sirkelvormige silinder, onderworpe aan ‘n teenwind, word gemodelleer deur gebruik te maak van “CFD”. Die “CFD” model wat gebruik word om die inlaatverlies te evalueer is gevalideer met data verkry vanaf ‘n eksperimentele koeltoring sektor model. Verder word die “CFD” model gebruik in ‘n ondersoek om te bebaal wat die effek is van verskillende inlaat geometrieë op die inlaat verlies koeffisiënt en die effektiewe diameter sodat die inlaat geometrie van koeltorings verbeter kan word. ‘n “CFD” model word dan ontwikkel om die druk verdeling rondom ‘n sirkelvormige silinder te ondersoek. Die silinder word as oneindig gesimuleer met ‘n glade en ruwe wand sodat die resultate vergelyk kan word met eksperimentele data verkry vanaf literatuur. Die afdeling word afgesluit deur die silinder as eindig met ‘n ruwe wand te simuleer en dan word die resultate vergelyk met eksperimentele data verkry vanaf literatuur.

This paper deals with the application of speed variable pumps in industrial hydraulic systems. The benefit of the natural feedback of the load torque is investigated for the issue of condition monitoring as the development of losses can be taken as evidence of faults. A new approach is proposed to improve the fault detection capabilities by tracking the changes via machine learning techniques. The presented algorithm is an art of adaptive modeling of the torque balance over a range of steady operation in fault free behavior. The aim thereby is to form a numeric reference with acceptable accuracy of the unit used in particular, taking into consideration the manufacturing tolerances and other operation conditions differences. The learned model gives baseline for identification of major possible abnormalities and offers a fundament for fault isolation by continuously estimating and analyzing the deviations.

In spite of their high technical maturity, load sensing systems (LS) have system-inherent energy losses that are largely due to the operation of parallel actuators with different loads at the same pressure level. Hereby, the pressure compensators of the system are crucial. So far, excessive hydraulic energy has been throttled at these compensators and been discharged as heat via the oil. The research project “Reduction of System Inherent Pressure Losses at Pressure Compensators of Hydraulic Load Sensing Systems” aims to investigate a novel solution of reducing such energy losses. The pressure of particular sections can be increased by means of a novel hydraulic circuit. Therefore, a recovery unit is connected in series with a hydraulic accumulator via a special valve in the reflux of the actuators. The artificially increased pressure level of the section reduces the amount of hydraulic power to be throttled at the pressure compensators. As long as a section fulfills the switching condition of the valve, pressure losses at the respectiv pressure compensator can be reduced. Thus, via a suitable recovery unit excessive energy can be regenerated and can be directed to other process steps eventually.

Current efficiency measurements of variable hydraulic axial piston pumps are performed with the displacement system locked at maximum volume, thus without the controller. Therefore, the controller’s effect on the efficiency is not quantified at state of the art measurements. Former research on control systems mainly focused on the dynamic behaviour. This paper aims to quantify the losses in the displacement and control system and to research the dependencies of those. Therefore, a test rig is built up at IFAS to measure the control power of displacement controlled pumps. Furthermore, a simulation tool is developed to increase the understanding of the loss mechanisms of the investigated control systems. In conclusion, the paper shows the potential of efficiency improvements for displacement controlled pumps.

Dissertation (PhD (Agric))--University of Stellenbosch, 2003. / ENGLISH ABSTRACT: Leaf blackening is a particular problem limiting vase life and marketability of Protea cut flowers. This research investigated suppression of Protea leaf blackening with a specific focus on Protea cv. Sylvia (P. eximia x P. susannae) cut flowers. Leaf blackening decreased significantly with decreasing storage temperatures m 'Sylvia' proteas and this was attributed to lower respiration rate and conservation of carbohydrate. Low storage temperatures were beneficial in short term handling procedures encountered during airfreight. However, use of low temperatures alone during the longer sea freight period was unsatisfactory in either maintaining or extending 'Sylvia' protea vase life. Cooling of 'Sylvia' proteas under vacuum significantly suppressed leaf blackening and was of greater benefit than forced air cooling. Although removal of the uppermost leaves delayed leaf blackening in short term storage no significant benefit was found for longer storage periods. Girdling directly beneath the 'Sylvia' protea flowerhead significantly reduced leaf blackening and in combination with low storage temperatures (O°C) enabled a significant extension in both storage and vase life of 'Sylvia' proteas. 'Sylvia' proteas did not exhibit a climacteric respiration peak during 96 h storage at O°C. Exposure to ethylene did not increase Protea leaf blackening or have a detrimental effect on vase life of either proteas or pincushions evaluated. No beneficial response to sucrose supplementation was found in 'Sylvia' proteas. Analysis of the sugar content of both flowerhead and leaves indicated that glucose supplementation might be of benefit and was investigated. Holding solutions of 2.5 % glucose significantly extended vase life due to a significant reduction in leaf blackening. Vase life was terminated due to flowerhead collapse instead of leaf blackening for the first time in 'Sylvia' protea cut flowers. Vase life was significantly extended by 2:3% glucose pulse solutions and leaf blackening significantly suppressed with increasing glucose pulse concentration. Solution uptake was facilitated by use of high intensity PAR lights in the early morning and was attributed to increased stomata opening and a consequent increase in both transpiration and glucose solution uptake. The faster uptake of glucose solutions in shoots harvested in the afternoon was attributed to higher shoot temperatures and consequent transpiration rate to those harvested in the morning. There was a significant reduction in uptake time with increasing pulse temperature, which enabled vacuum cooling to be performed earlier further benefiting storage and vase life extension. Enclosure of 'Sylvia' proteas in polyethylene (PE) lined cartons did suppress leaf blackening in non-pulsed shoots. However, this had no practical significance on useful vase life, which was terminated at this point due to excessive leaf blackening. Water loss appears to have a minimal influence on 'Sylvia' protea leaf blackening. Shading at four and three weeks prior to harvest coincided with a period of significant flowerhead dry mass increase. It is thought that shading at this point, concurrent with an increased carbohydrate demand by the developing flower head resulted in a temporary limitation in carbohydrate supply resulting in the appearance of preharvest leaf blackening. It would appear that proteas do not store large quantities of carbohydrate. Although accentuating winter light conditions by shading did result in a decrease in carbohydrate content the fact that carbohydrate content was already low precluded shading from having a significant impact on postharvest leaf blackening. The finding that glucose was beneficial in extension of both storage and vase life of 'Sylvia' proteas directed research into its use for other Protea and Leucospermum cut flowers. Significant differences in the response to glucose supplementation were found in both Protea and Leucospermum (pincushions). The significant difference in sensitivity to glucose concentration in 'Pink Ice' proteas (phytotoxic at 2:4%) and 'Susara' proteas (no apparent toxicity), in conjunction with a lack of response in 'Cardinal' proteas, a hybrid from the same parents as 'Sylvia' indicates the need to direct future research to individual cultivars. Glucose supplementation had no beneficial effect on vase life of 'Scarlet Ribbon' and 'Tango' pincushions, whilst significantly extending vase life of 'Cordi', 'Gold Dust', 'High Gold' and 'Succession' pincushions. / AFRIKAANSE OPSOMMING: Blaarverswarting is 'n spesifieke probleem wat die vaasleeftyd en die bemarkbaarheid van Protea snyblomme beperk. In hierdie navorsing is ondersoek ingestel na die onderdrukking van Protea blaarverswarting met spesifieke fokus op die snyblomme van die kv. Sylvia (P. eximia x P. susannae). Die voorkoms van blaarverswarting by 'Sylvia' het merkbaar afgeneem tydens die verlaging van bergingstemperature. Hierdie afname is toegeskryf aan 'n laer respirasietempo en die behoud van koolhidrate. Lae bergingstemperature in die korttermyn hantering van die produk tydens lugvrag was voordelig. Die gebruik van lae temperature, slegs tydens die langer verskeepingsperiode, was egter onbevredigend vir vaasleeftyd verlenging en onderhoud van 'Sylvia' protea. Die afkoeling van 'Sylvia' proteas onder vakuum het blaarverswarting in 'n groot mate onderdruk en het beter resultate gelewer as geforseerde lugverkoeling. Alhoewel die verwydering van die heel boonste blare blaarverswarting by korttermynopberging vertraag het, het dit geen merkbare voordele vir langer bergingsperiodes ingehou nie. Ringelering direk onder die blomkop van die 'Sylvia' protea het blaarverswarting aansienlik verminder, en saam met lae bergingstemperature (O°C) het dit 'n merkbare verlenging in beide die bergingstyd en die vaasleeftyd van 'Sylvia' proteas teweeggebring. 'Sylvia' proteas het geen klimakteriese respirasiekruin tydens 'n bergingsperiode van 96 uur teen O°C getoon nie. Blootstelling aan etileen het nie die Protea blaarverswarting laat toeneem of 'n nadelige effek op die vaasleeftyd van die proteas of speldekussings wat geevalueer is, gehad nie. Geen voordelige reaksie op sukrose-byvoeging is in 'Sylvia' proteas gevind nie. 'n Analise van die suikerinhoud van beide die blomkoppe en die blare het aangetoon dat 'n glukose-byvoeging moontlik voordelig kon wees, en hierdie aspek is ondersoek. Met stooroplossings van 2,5 % glukose is die vaasleeftyd aansienlik verleng omdat daar 'n merkbare afname in blaarverswarting was. Vir die eerste keer in die geval van die 'Sylvia' protea, het die vaasleeftyd van die snyblomrne tot 'n einde gekom omdat die blornkoppe uitmekaar gebreek het en nie omdat blaarverswarting ingetree het nie. Die vaasleeftyd is aansienlik verleng met ~ 3% glukose-pulsoplossings, en blaarverswarting is merkbaar onderdruk met die verhoging van hierdie oplossings se glukosekonsentrasie. Die opname van die oplossings is gefasiliteer deur hoe intensiteit PAR (fotosinteties-aktiewe radiasie) ligte vroeg in die oggend, en is toegeskryf daaraan dat meer huidmondjies oopgegaan het. Dit het gelei tot 'n toename in transpirasie en 'n toename in die opname van die glukose-oplossing. Die feit dat glukose-oplossings vinniger opgeneem is deur lote wat in die middag geoes is, is toegeskryf daaraan dat loottemperature dan hoer is as soggens en gevolglik lei tot 'n vinniger transpirasietempo. Daar was 'n merkbare afname in die opnametyd wanneer die temperatuur van die pulsoplossings verhoog is. Vakuumafkoeling kon dus vroeer toegepas word, wat 'n verlenging in bergingstyd en vaasleeftyd tot gevolg gehad het. Verpakking van 'Sylvia' proteas in kartonne wat met poli-etileen uitgevoer is, het blaarverswarting van lote wat nie aan pulsering onderwerp is nie, onderdruk. Hierdie maatreel het egter geen praktiese waarde met betrekking tot vaasleeftyd nie; die vaasleeftyd het tot 'n einde gekom as gevolg van omvangryke blaarverswarting. Dit lyk asof waterverlies weinig invloed het op die blaarverswarting van' Sylvia' proteas. Die vermoede bestaan dat lae koolhidraatvlakke proteas ontvanklik maak vir blaarverswarting. Alhoewel die beklemtoning van winterligtoestande deur beskaduwing gelei het tot 'n afname in koolhidraatinhoud, was hierdie inhoud reeds laag en blaarverswarting na die oes is nie beinvloed nie. Beskaduwing tydens die vier en drie weke voor oestyd het saamgeval met 'n tydperk van aansienlike toename in die droe massa van die blomkop. Die vermoede bestaan dat beskaduwing tydens hierdie fase, saam met die toename in die ontwikkelende blomkop se behoefte aan koolhidrate, aanleiding gegee het tot 'n tydelike beperking in koolhidraatvoorraad wat die voorkoms van blaarverswarting voor die oes tot gevolg gehad het. Die bevinding dat glukose voordelig is vir die verlenging van beide die bergingstyd en die vaasleeftyd van 'Sylvia' proteas het die navorsing gerig om ook ondersoek in te stel na die gebruik daarvan vir ander Protea en Leucospermum snyblomme. Merkbare veranderinge is gevind in die reaksie op glukosebyvoegings in beide Protea en Leucospermum (speldekussings). Die opmerklike verskil in sensitiwiteit vir glukosekonsentrasie in 'Pink Ice' proteas (fitotoksies by ~ 4%) en 'Susara' proteas (geen klaarblyklike toksisiteit), saam met 'n gebrek aan reaksie by 'Cardinal' proteas, 'n hibried van dieselfde ouers as 'Sylvia', dui aan dat verdere navorsing op individuele kultivars toegespits sal rnoet word. Glukosebyvoegings het geen voordelige uitwerking op die vaasleeftyd van 'Scarlet Ribbon' en 'Tango' speldekussings gehad nie, terwyl dit die vaasleeftyd van 'Cordi', 'Gold Dust', 'High Gold' en 'Succession' speldekussingkultivars merkbaar verIeng het.

<p>Bioenergi är en stor industri i Sverige och står för en betydande del av energiomsättningen. Bioenergi i form av flis förvaras runt om i landet på hög i väntan på förbränning. Då högarna läggs upp startar olika processer som värmer upp stacken, ofta till temperaturer på 50°C under det första dygnet. En vanlig ansats i litteraturen är att denna temperaturstegring beror på aerob nedbrytning. Arbetet ämnar undersöka om denna uppvärmning endast beror av mikrobiella aktiviteter. Hypotesen prövas genom kalorimetriska mätningar av effekt från prover av flis och simulering av första dygnets temperaturutveckling i ett program som programmeras under arbetes gång.</p><p>I modellen så betraktas för enkelhets skulle flisstacken som en avlång figur med rektangulärt tvärsnitt. Figuren delas sedan in i lämpligt stora beräkningsceller. Problemet löses genom att iterativt räkna fram ett strömningsfält. Strömningsfältet och effekterna som räknas ut hålls sedan konstanta under ett tidssteg, 5-15min. Den magasinerade värmeenergin används sedan för att räkna fram en ny temperatur som så ger ett nytt strömningsfält och nya effekter. I modellen användes enbart explicita metoder eftersom de är snabbare och mycket enklare att programmera.</p><p>Ett flertal experiment i kalorimeter genomfördes med olika prover av flis och torv. Prover med barkflis gav högst utslag. Den högsta effekten som uppmättes var 2,16W/kg TS. Då effekter av denna storleksordning användes som inre effektgenerering i programmet gav detta inte en temperatur ökning motsvarande sådana som uppmätts i verkligheten. Detta tyder på att mer än aerob nedbrytning krävs för att ge en temperatur på över 50°C.</p> / <p>Bioenergy is a major industry in Sweden and accounts for a significant part of the energy production. Bioenergy in the form of wood chips is stored in piles across the country awaiting combustion. When the piles are acumulated, various processes that heat the stack begin, often to temperatures of 50 °C during the first day. A common approach in the literature is that this temperature rise is due to the aerobic decomposition. This paper will investigate whether the microbial activity is the fundamental cause for warming. The hypothesis is tested by calorimetric measurements of power from the samples of wood chips and simulation of the first day's temperature development in a programme that was desinated.</p><p>For simplicity the model considers an oblong wood chip pile with rectangular cross-section. The pile is then subdivided into appropriately sized calculation cells. The problem is solved by calculating a flow field iteratively. The flow field and the effects that are calculated is then static during one time step for approximately 5-15 minutes. The produced heat energy is then used to calculate a new temperature, which renders a new flow field and new powers. The model uses only explicit methods because they are faster and much easier to programme.</p><p>Several calorimetric experiments were carried out with various samples of wood chips and peat. Samples of bark chips achieved the highest result. The highest power measured was 2.16 W / kg DM. When the effects of this magnitude were used as internal power source in the programme the temperature did not increase corresponding to those measured in reality. This suggests that more than aerobic decomposition is needed to reach a temperature above 50°C.</p>

No description available.