Spelling suggestions: "subject:"[een] LOSSES"" "subject:"[enn] LOSSES""
211 |
Análise da redistribuição de esforços em vigas de concreto protendido com seções compostas. / Analysis of the force redistribution in prestressed concrete beams with composite sections.Silva, Iberê Martins da 13 October 2003 (has links)
No cálculo das perdas progressivas de protensão, decorrentes da retração e da fluência do concreto e da relaxação do aço de protensão, a norma NBR 6118 prescreve dois procedimentos simplificados, indicados para fase única de operação, ou seja, quando se consideram fases únicas de concretagem, de carregamento permanente e de protensão; e o método geral de cálculo, que permite considerar ações permanentes aplicadas em idades diferentes, e tratar a seção transversal constituída de diversas camadas discretas. Neste trabalho será desenvolvido o método dos prismas equivalentes, baseado no conceito das fibras conjugadas, e com a proposta de Trost-Bazant para consideração de fluência e retração dos materiais. Possibilita-se, assim, o cálculo da redistribuição de tensões em qualquer seção, como também da redistribuição de esforços em estruturas hiperestáticas devido a deformações diferidas. Será feita a sistematização do cálculo para o caso usual da seção resultante de laje concretada sobre viga pré-moldada protendida, permitindo considerar as idades diversas de concreto como também as várias camadas de cabos de protensão, e de armaduras passivas. A análise de redistribuição de esforços em estruturas hiperestáticas será baseada nas mudanças de curvatura das seções provocadas pelos efeitos progressivos. Será feita uma aplicação a uma ponte em viga protendida contínua de seção caixão, construída pela anexação de cinco vãos sucessivos. / When calculating prestress time-dependent losses, resulting from concrete shrinkage and creep, as well as from the relaxation of prestress steel, the standard NBR 6118 establishes two simple procedures. They are prescribed when operating in single phase, i.e., when considering single steps for concrete pouring, permanent load and prestress. The general method used in calculations allows that permanent actions be applied to different ages, and that the cross-section constituted by several discrete layers be handled. This work will develop the method of equivalent prisms, based on the concept of creep fibers, using the Trost-Bazant proposal when considering material creep and shrinkage. This method allows calculating the redistribution of tensions in any section, as well as the redistribution of straining in statically indeterminate structures, due to time-dependent deformations. The systematic calculation will be developed for a normal case of the resulting section in cast-inplace slab over precast girder. This allows considering the different ages of the concrete, as well as the multiple layers of cables, and non-prestressed reinforcement. An analysis of the strain redistribution in statically indeterminate structures will be based on the curvature changes in sections, which are provoked by time-dependent effects. An application will be made to a bridge of prestressed continuous box girder, formed by the attachment of five successive spans.
|
212 |
Perdas de hexazinona e diuron por escoamento superficial em sistema de cana crua / Hexazinone and diuron runoff in green cane systemsVaz, Lucas Rafael Lommez 27 October 2016 (has links)
A canavicultura é de extrema importância para o Brasil e para o mundo. O aumento da produção de cana-de-açúcar reflete em maior uso de herbicidas, como o diuron e a hexazinona. A adoção do sistema de cana crua, em que a palha permanece sobre o solo após colheita mecanizada, implica em alteração na dinâmica ambiental destes herbicidas. Portanto, o objetivo deste trabalho foi avaliar as perdas de diuron e hexazinona por escoamento superficial em sistemas de cana crua. O experimento constou de sistema fatorial 3x2x2 (12 tratamentos) com delineamento em blocos casualizados e 4 repetições, totalizando 48 parcelas. Os fatores foram: 3 níveis de palha (0, 50% e 100% da dose = 14 t ha-1); 2 níveis de umidade de solo (10 e 18% v/v) e 2 momentos de chuva (0 e 3 dias após aplicação dos produtos). Sobre as parcelas de 1 m2, foi utilizado um simulador de chuvas ajustado para evento com intensidade de 80 mm h-1 durante uma hora e meia, resultando num volume total precipitado de 120 mm. Um produto comercial contendo diuron e hexazinona foi aplicado na dose de 3 kg ha-1 e calda de 700 L ha-1, conforme recomendações do fabricante. As quantidades de água e sedimentos escoadas foram registradas e as concentrações dos herbicidas analisadas em solução por UPLC. Os resultados foram submetidos à ANOVA e, em caso de interação, as médias foram comparadas pelo teste de Tukey (p<0,05). A quantidade de diuron e hexazinona nos sedimentos foi estimada fazendo uso dos dados de sorção da literatura. A presença de palha sobre o solo reduziu as perdas de água, sedimentos e diuron, mas não teve efeitos sobre as perdas de hexazinona. Em outras palavras, a cobertura morta não reduz as perdas de moléculas muito solúveis, como a hexazinona. As maiores perdas de diuron e hexazinona foram observadas em solução, mesmo no tratamento controle (sem palha), uma vez que a palha reduz a massa de sedimentos desprendida. No entanto, não houve diferença nas perdas entre os dois níveis de palha (50 e 100%), sugerindo que 7 t ha-1 são suficientes para atenuar as perdas de água, sedimentos e diuron. Maiores teores de água no solo (18 versus 10% v/v) implicaram em maiores perdas dos herbicidas por escoamento superficial. Já o momento da chuva não afetou as perdas dos herbicidas, indicando que 3 dias não foram suficientes para a dissipação ou maior sorção dessas moléculas. / Sugarcane is a major crop in Brazil and of great importance to the world. Higher yields implicate in higher use of pesticides, such as diuron and hexazinone. The adoption of green cane system, in which the straw is kept in the soil surface after mechanical harvesting, has changed the environmental behavior of theses herbicides. Therefore, the goal of this research was to evaluate runoff losses of diuron and hexazinone in green cane systems. The 3x2x2 (12 treatments) factorial experiment was performed in a randomized block with 4 replicates. The factors were i) 3 levels of sugarcane straw (0, 50% and 100%, based on a dose of 14 t ha-1); ii) 2 levels of initial soil moisture (10 and 18% VWC), and iii) 2 rainfall periods (0 and 3 dafter herbicides application). A rainfall simulator was adjusted to simulate an 80 mm h-1 rainfall event for one and a half hour (120 mm) over plots of 1 m2. A commercial product containing diuron and hexazinone was used at rate of 3 kg ha-1 dissolved in 700 L ha-1, according to label recommendations. The amounts of water and sediments were registered and herbicides concentrations analyzed by UPLC. Herbicides attached to the sediments were estimated according to sorption data from the literature. The results were evaluated by ANOVA and means compared by Tukey test (p<0.05). Sugarcane straw decreased water, sediments, and diuron losses by runoff, but did not affect hexazinone losses. In other words, crop residues cannot prevent losses of highly soluble molecules, such as hexazinone. Greater herbicides losses were observed in the aqueous phase, even for the control treatment (without straw), since straw reduces the amounts of detached sediments. However, no difference was observed between the two levels of straw (50 and 100%), meaning that 7 t ha-1 is sufficient for mitigating water, sediments, and diuron losses by runoff. Higher soil moisture (18 versus 10%) resulted in higher herbicides runoff. Yet, rainfall period did not affect herbicide losses, indicating that 3 days were not long enough for enhancing these herbicides dissipation or sorption.
|
213 |
Perdas fetais no distrito de São Paulo / Foetal loss for the district of São Paulo city of São Paulo, BrazilMello Jorge, Maria Helena Prado de 11 November 1974 (has links)
Estudaram-se as perdas fetais ocorridas no distri to de São Paulo, no período de dois anos (1 de junho de 1968 a 31 de maio de 1970) e cuja residência da mãe se localizasse também no distrito de São Paulo. O trabalho objetivou o estudo das mesmas segundo as variáveis fornecidas pelos atestados dos nascidos mortos, que se constituiram em seu material básico. O ponto de vista social foi focalizado através dos aspectos referentes à cor, filiação, naturalidade e profissão dos pais. Os itens relativos a sexo, duração da gestação, local onde ocorreu o evento, história obstétrica, idade da mãe e causa da perda constituiram o conjunto de dados para análise do ponto de vista médico-estatístico. Quanto ao problema da causa, é de se destacar que esta é a primeira vez que tal aspecto é analisado entre nós. Utilizando dados obtidos atravês da \"Investigação Interamericana de Mortalidade na Infância\", foi possível obter o coeficiente corrigido de mortalidade perinatal. A pesquisa visou ainda ao estudo das implicações que as perdas fetais acarretam no campo Jurídico. Quanto aos resultados, devem ser destacados o problema do registro de perdas por local de ocorrência e não de residência, a maior proporção de ilegitimidade nas perdas fetais precoces e a maior proporção de pais naturais da região leste do Brasil. A razão de masculinidade se mostrou maior quanto menor fosse o tempo de gestação. Alguns dados permitiram inferir que existe uma sub-enumeração de perdas precoces e intermediárias. Verificou-se ainda que, aproximadamente, 86% das perdas ocorreram em hospitais,que a quarta parte dos casos estudados foi produto de primeira gestação e que em 85% das perdas o parto foi normal. Relativamente à idade da mãe, foi verificado que o risco de vir a ter uma perda - excetuando-se o grupo de mulheres de menos de vinte anos - aumenta com a idade materna. Em face de erros e imperfeições quanto ao preenchimento do atestado e da ausência de alguns dados de grande interesse para a Saúde Pública, foi sugerida a adoção de novo modelo de atestado de óbitos perinatais. / Foetal loss of resident women of the district of Sao Paulo that occurred in this area, were studied for a two years period, from June 1st, 1968 to May 31st, 1970. The objectives of this study were: - analysis of the foetal mortality differentials according to the available information in the certificates of stillbirths; - analysis of legal involvements pertinent to the foetal deaths. The variables considered were: - social: color, legitimacy, parents birth place and their occupation; - medical-demographic: sex, lenght of pregnancy, birth-order, single or plural deliveries, age of mother, and cause of death. Data available in the Inter American Investigation in Childhood permitted the calculation of the Perinatal Mortality rate. The conclusions were: - a large proportion of illegitimacy observed among the early foetal deaths - the sex-ratio (x 1000 women) was higher in the early pregnancy\'s foetal loss; - there is an under-registration of foetal loss occurred before 28 weeks of gestation; - 86% of the foetal loss occurred in hospitals; - 25% of foetal loss occurred in women pregnant for the first time; - 11% of the foetal loss were delivered by Caesarean section; - the risk of having a foetal loss increases with the increasing of the mother\'s age. The recommendations were: - the tabulation of the stillbirth certificate data should be done by local of residence instead of by occurrence; - a new model of Perinatal death certificate was proposed in order to provide more complete data that are important from the point of view of Public Health.
|
214 |
Analysis of loss mechanisms in superconducting windings for rotating electric generatorsMinervini, Joseph Vito January 1981 (has links)
Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1981. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING. / Vita. / Includes bibliographical references. / by Joseph Vito Minervini. / Ph.D.
|
215 |
A super-capacitor based energy storage for quick variation in stand-alone PV systemsSehil, Khaled January 2018 (has links)
Photovoltaic (PV) system is one of the most prominent energy sources, producing electricity directly from sunlight. In additionally, it is easy to install and is supported financially by many governments as part of their strategy to reduce CO2 gas emissions, and to achieve their agreed set of reduction targets by 2020. In the meantime, researchers have been working on the PV system to make it more efficient, easy to maintain, reliable to use and cost effective. In the stand-alone PV system, a battery is required. This is due to the fluctuating nature of the output energy delivered by the PV arrays owing to the weather conditions and the unpredictable behaviour of uses with regard to the consumption of energy. During the hours of sunshine, the PV system is directly feeding the load and any surplus electrical energy is stored in the battery at a constant current. During the night, or during a period of low solar irradiation, the energy is supplied to the load from the battery. However, the stand-alone PV system is designed to provide an acceptable balance between reliability and cost, which is a major challenge to the designer owing to the approaches used to size the PV arrays and the battery bank. As a result, the unpredictable, quick daily changes on the PV output is not dependable. Moreover, battery performance, length of life and energy efficiency depends on the rate at which it is discharged. Therefore, it is essential to use other methods to deal with any quick variation in energy. In this thesis, a super capacitor is used to solve this problem, as it can deal with the fast-changing weather, or a rapid variation in the energy requirements of the customer. A critical evaluation with in-depth analysis of the placement and the implementation for the super-capacitor in the PV standalone system has been carried out. The results show, super-capacitor capacitance and the converter efficiency affect the delivered load energy. However, the bi-directional topology performs better than uni-directional under the same conditions. Finally, a further improvement of the system at component level, has been developed through an energy recovery snubber for the switching transition and achieved a recovery of energy for the resistive load, 94.44% for the turn on transition and 92.86% for the turn off transition. Moreover, for the inductive load, 78.33% and 97.33% of energy has been recovered for the turn on and for the turn off transition respectively.
|
216 |
Aplicação de dessecante na cultura de cana-de-açucar (Saccharum spp.) para colheita mecanizada / Application of desiccant in the cultivation of sugar cane (Saccharum spp.) in mechanized harvestingGilda Brasil Camargo Cardoso 15 July 2011 (has links)
A colheita mecanizada da cultura de cana-de-açúcar tem grande relevância no sistema de produção de tal cultura, influenciando na qualidade e nos custos da matériaprima entregue à usina. O presente trabalho teve por objetivo avaliar o efeito do herbicida Paraquat, aplicado como dessecante em pré-colheita, no sistema de corte, carregamento e transporte de cana-de-açúcar. O experimento foi conduzido em área de Latossolo Vermelho - Amarelo, localizada no município de Boa Esperança do Sul SP, em canavial sem queima prévia, sistematizado para colheita mecanizada. A área experimental possuía 0,353 ha sendo representada por 24 fileiras, das quais 12 foram tratadas com o dessecante Paraquat e 12 foram consideradas como testemunha. Os tratamentos foram: V1P (área com aplicação de Paraquat e velocidade da colhedora de 4 km h-1); V2P (área com aplicação de Paraquat e velocidade da colhedora de 6 km h-1); V1T (área testemunha e velocidade da colhedora de 4 km h-1) e V2T (área testemunha e velocidade da colhedora de 6 km h-1). O delineamento experimental adotado foi o inteiramente casualizado, com esquema fatorial 2x2 (2 tratamentos: com ou sem aplicação de dessecante x 2 velocidades da colhedora: 4 e 6 km h-1). Foi constatado estatisticamente que, com a aplicação de dessecante, não houve diferenças mínimas significativas nas seguintes variáveis: Eficácia de Manipulação, perdas de cana-de-açúcar na colheita, quantidade de matéria estranha mineral na matéria-prima colhida e consumo de óleo diesel nas capacidades efetivas de colheita (Bruta e Líquida). Entretanto, a aplicação do dessecante Paraquat diminuiu a quantidade de matéria estranha vegetal presente na matéria-prima colhida, aumentou a capacidade efetiva líquida e bruta de colheita, o consumo de combustível no tratamento V2P e o peso específico da matéria-prima transportada, evidenciando os benefícios da aplicação do produto na cultura de cana-de-açúcar. / The mechanized harvest of sugar cane has great relevance in the production system of the culture, influencing in the quality and in the costs of the product delivers to the plant. The present work had for objective to evaluate the effect of the herbicide Paraquat, applied as desiccant in preharvest, in the system of cut, shipment and transport of sugar cane. The experiment was lead in area of Yellow Red Latossolo, located in the city of Boa Esperança do Sul - SP, in sugar cane plantation without previous burning, systemize for mechanized harvest. The experimental area had 0.353 ha being represented by 24 rows, of which 12 were treated with Paraquat and 12 were considered as control. The treatments had been: V1P (area with application of Paraquat and speed of the sugar cane harvester 4 km h-1); V2P (area with application of Paraquat and speed of the sugar cane harvester 6 km h-1); V1T (area testifies and speed of the sugar cane harvester 4 km h-1) and V2T (area testifies and speed of the sugar cane harvester 6 km h-1). The adopted experimental delineation was entirely randomized, in a factorial 2x2 (two treatments: with or without the application of desiccant x 2 speed of the harvester: 4 and 6 km h-1). It was found that statistically, with the desiccant application, there were no differences in the following variables: Efficacy of manipulation, loss of sugar cane at harvest, amount of foreign matter in mineral raw materials harvested and diesel consumption in the effective capacity of harvest (Gross and Net). However, the application of Paraquat decreased the amount of foreign matter present in raw plant material harvested, increased the effective capacity of net and gross harvest, the fuel consumption in treatment V2P and specific weight of raw material transported, evidencing the benefits of the application of the product in the cultivation of sugar cane.
|
217 |
Equipamentos e metodologias para o controle e redução de perdas reais em sistemas de abastecimento de água. / Equipments and methodologies for the control and reduction of real losses in the water supply systems.Nilton Zaniboni 14 May 2009 (has links)
O conhecimento dos equipamentos e metodologias para o controle e redução de perdas reais em sistemas de abastecimento de água tem assumido um papel importante no setor de saneamento, diante da necessidade de sustentabilidade e conservação ambiental. Este trabalho apresenta os principais equipamentos utilizados em detecção acústica de vazamentos não visíveis, dentro de suas variáveis, vantagens e desvantagens para cada tipo e possibilidade de aplicação e permite aos gestores a escolha dos equipamentos em função de suas necessidades e possibilidades. Apresenta os princípios físicos que norteiam o funcionamento dos equipamentos, nos estudos do comportamento do som nos vários ambientes envolvidos, bem como na capacidade humana em discernir esses sons. A metodologia para essa atividade é fortemente influenciada por esses fatores e seu conhecimento é fundamental para o sucesso dos trabalhos de detecção de vazamentos por detecção acústica. Equipamentos e metodologias de detecção de vazamentos não acústicos têm sido cada vez mais utilizados e são apresentadas as suas principais características e aplicabilidades. O estudo da VRP e do booster, bem como os procedimentos e padrões para os ramais prediais de ligação de água, podem ser utilizados para o efetivo controle e redução de perdas reais em sistemas de abastecimento de água. / The knowledge and methodologies of the equipments for the control and reduction of real losses in the water supply systems have assumed an important role in the sanitation sector, face to the necessity of sustainability and environmental preservation. This study presents the main equipments used in the acoustic leakage detection, exploring its variables, advantages and disadvantages for each type and application possibilities, giving to the managers the choice of the equipments considering their necessities and possibilities. It presents the physical principles that direct the equipments working in the studies of sound behavior in the different environments involved, such as the human capacity to identifying these sounds. The methodology for this activity is strongly influenced by these factors and its knowledge is fundamental for the success of the leakage detection works by acoustic detection. Equipments and methodologies of non-acoustic leakage detection have been more and more used and its main characteristics and uses are presented in this study. The RPV and boosters study, such as the procedures and standards to buildings extensions of the water connection, can be used for the effective control and reduction of the real looses in the water supply systems.
|
218 |
Avaliação da eficácia de modelos de simulação hidráulica na obtenção de informações para diagnóstico de perdas de água. / Evalueting the efectiveness of hydraulic simulation in obtaining information for water leak diagnosis.Paulo Rogério Palo 27 August 2010 (has links)
Atualmente a avaliação das perdas de água, nos sistemas de distribuição, é feita com base em equações empíricas, que utilizam informações, agrupadas e totalizadas, de uma área. Isto torna necessária sua subdivisão em frações cada vez menores, na busca da fração mais crítica. Neste trabalho, é apresentada uma avaliação da eficácia do uso de modelos de simulação hidráulica na obtenção das informações necessárias para a elaboração de um diagnóstico de perdas de água, com uma metodologia prática para o uso de modelos com este objetivo. Apresenta uma classificação dos trechos de rede em três categorias A, B e C, que facilita a priorização dos trechos mais críticos facilitando a análise por meio de gráficos de pareto e mapas temáticos. Demonstra que a adoção da simulação hidráulica no estudo das causas de perdas de água, nos sistemas de abastecimento, é uma ferramenta eficaz e permitirá às empresas de saneamento, uma melhoria na gestão operacional, que garante a sustentabilidade da empresa, a economia dos recursos humanos, econômicos, e principalmente, os hídricos. / Currently water losses evaluation in distribution systems, is based on empirical equations using information, grouped and totaled, covering whole area. Thus, becomes necessary to subdivide the area into smaller and smaller fractions, searching for the most critical part. This study presents, the effectiveness evaluation of the hydraulic simulation models, use to obtain the information necessary in elaboration diagnosis of water losses, with a practical methodology for using models for this purpose. Shows a pipe classification in three categories A, B and C, its began possible analyses with pareto graphics and thematic maps. Demonstrates that hydraulic simulation adoption is an effective tool in the study of water loss in supply systems. It will allow companies an operational management improvement, ensuring the sustainability of the business and economics of human, financial, and especially, water resources.
|
219 |
Perdas fetais no distrito de São Paulo / Foetal loss for the district of São Paulo city of São Paulo, BrazilMaria Helena Prado de Mello Jorge 11 November 1974 (has links)
Estudaram-se as perdas fetais ocorridas no distri to de São Paulo, no período de dois anos (1 de junho de 1968 a 31 de maio de 1970) e cuja residência da mãe se localizasse também no distrito de São Paulo. O trabalho objetivou o estudo das mesmas segundo as variáveis fornecidas pelos atestados dos nascidos mortos, que se constituiram em seu material básico. O ponto de vista social foi focalizado através dos aspectos referentes à cor, filiação, naturalidade e profissão dos pais. Os itens relativos a sexo, duração da gestação, local onde ocorreu o evento, história obstétrica, idade da mãe e causa da perda constituiram o conjunto de dados para análise do ponto de vista médico-estatístico. Quanto ao problema da causa, é de se destacar que esta é a primeira vez que tal aspecto é analisado entre nós. Utilizando dados obtidos atravês da \"Investigação Interamericana de Mortalidade na Infância\", foi possível obter o coeficiente corrigido de mortalidade perinatal. A pesquisa visou ainda ao estudo das implicações que as perdas fetais acarretam no campo Jurídico. Quanto aos resultados, devem ser destacados o problema do registro de perdas por local de ocorrência e não de residência, a maior proporção de ilegitimidade nas perdas fetais precoces e a maior proporção de pais naturais da região leste do Brasil. A razão de masculinidade se mostrou maior quanto menor fosse o tempo de gestação. Alguns dados permitiram inferir que existe uma sub-enumeração de perdas precoces e intermediárias. Verificou-se ainda que, aproximadamente, 86% das perdas ocorreram em hospitais,que a quarta parte dos casos estudados foi produto de primeira gestação e que em 85% das perdas o parto foi normal. Relativamente à idade da mãe, foi verificado que o risco de vir a ter uma perda - excetuando-se o grupo de mulheres de menos de vinte anos - aumenta com a idade materna. Em face de erros e imperfeições quanto ao preenchimento do atestado e da ausência de alguns dados de grande interesse para a Saúde Pública, foi sugerida a adoção de novo modelo de atestado de óbitos perinatais. / Foetal loss of resident women of the district of Sao Paulo that occurred in this area, were studied for a two years period, from June 1st, 1968 to May 31st, 1970. The objectives of this study were: - analysis of the foetal mortality differentials according to the available information in the certificates of stillbirths; - analysis of legal involvements pertinent to the foetal deaths. The variables considered were: - social: color, legitimacy, parents birth place and their occupation; - medical-demographic: sex, lenght of pregnancy, birth-order, single or plural deliveries, age of mother, and cause of death. Data available in the Inter American Investigation in Childhood permitted the calculation of the Perinatal Mortality rate. The conclusions were: - a large proportion of illegitimacy observed among the early foetal deaths - the sex-ratio (x 1000 women) was higher in the early pregnancy\'s foetal loss; - there is an under-registration of foetal loss occurred before 28 weeks of gestation; - 86% of the foetal loss occurred in hospitals; - 25% of foetal loss occurred in women pregnant for the first time; - 11% of the foetal loss were delivered by Caesarean section; - the risk of having a foetal loss increases with the increasing of the mother\'s age. The recommendations were: - the tabulation of the stillbirth certificate data should be done by local of residence instead of by occurrence; - a new model of Perinatal death certificate was proposed in order to provide more complete data that are important from the point of view of Public Health.
|
220 |
Estudo de tecnologias aplicáveis à automação da medição de energia elétrica residencial visando à minimização de perdas. / Study of applicable technologies for residential electric energy metering automation in order to minimize losses.Clóvis Aparecido Paulino 26 October 2006 (has links)
Atualmente a medição de energia elétrica para residências em centros urbanos é realizada por meio de medidores eletromecânicos lidos de forma manual. Neste processo uma série de problemas foram observados, dos quais se destacam: erros de leitura, dificuldade de acesso ao ponto de medição, bancos de dados sem atualização, dentre outros. A automação do processo de medição e da leitura, com base nos medidores existentes ou com o uso de medidores eletrônicos da energia elétrica, além de resolver os problemas citados, tem potencialmente uma série de vantagens, que incluem: combate a fraudes e furto de energia, implementação de tarifas diferenciadas em função da hora de consumo (tarifa amarela), corte e religamento remoto de energia, implementação de programas de energia pré-paga, levantamento de curvas de carga e eliminação de erros e custos do processo de leitura manual. Por outro lado observa-se que existem no Brasil cerca de 43 milhões de medidores residenciais instalados, sendo relativamente baixos os custos dos medidores eletromecânicos e do sistema de leitura manual. Desta forma, somente será possível implementar sistemas de automação da medição de energia elétrica residencial se os sistemas ora propostos forem ao mesmo tempo de custo reduzido e altamente confiáveis. O sistema de automação em estudo irá considerar inclusive o aproveitamento dos medidores eletromecânicos existentes, com a instalação de sistemas eletrônicos de coleta dos dados de consumo comunicando-se com concentradores locais, que por sua vez são interligados a sistemas computacionais instalados dentro da concessionária. Os resultados do estudo mostram que hoje existe uma concreta possibilidade de se obter sistemas de automação da medição de energia elétrica residencial seguros e de custos reduzidos. O trabalho ora proposto será desenvolver um sistema automatizado para a medição de energia residencial em centros urbanos, constituído por um módulo concentrador para oito residências, com comunicação deste para um centro de operação da concessionária. Será apresentada a metodologia para a implementação do sistema e considerado um estudo de caso. / In these days, the energy measurement system for residences in urban areas is carried out by eletromechanical meters, which are read manually. Several problems have been observed in this process, which we can emphasize: reading errors, difficulty to access the measurement place, outdated databases, etc. The reading and the measurement automation processes, based in the current eletromechanical meters or with the electronic version of these equipment, besides solving the mentioned problems, have several advantages, such as: minimization of fraud and robbery of energy, implementation of differentiated rates depending on the time of the day (ex:yellow rate), remote energy switch-off and switch-on, implementation of a prepaid system, possibility to get the load curve of each consumer and elimination of error and costs embedded in the manually reading process. On the other hand, we can observe that in Brazil there are an estimated 43 millions residential meters already installed, and the costs for the current measurement system, and also of the meters, are very low. In this scenario, the implementation of a automated system for residential energy measurement is that the proposed system has a very low cost at the same time provides a high reliability. The proposed automation system will consider the reutilization of the current mechanical meters, with the installation of an electronic systems for the consumption data collection, communicating with local concentrators, which in their turn are linked to a computing systems in the energy company. The results of the present work show that, nowadays, there is a real possibility to get, a trustable and cheap automated measurement system for energy in residential urban area. The proposed work is the development of an automated system, for residential energy measurement in urban area. It's composed of a concentrator module for eight residences, with communication from this point to the energy company's operation center. It will be presented a methodology to implement such a system and also a case study.
|
Page generated in 0.0687 seconds