In this work, I aim to clarify the mechanism that allows steel to attain higher chloride threshold as it is cathodically polarized. Specifically, I seek to provide empirical information on whether an intrinsic (predominantly interfacial effects of polarization) or an extrinsic (predominantly concentration changes due to polarization) mechanism may be dominant in the beneficial effect of polarization. I carried out this experiment with 12 identical concrete specimens, each with a cast-in steel plate, constantly exposed them to high-chloride environment. The specimens were divided into 4 triplicates and polarized at 4 different level from OCP, -200, -300 to -400 mVSCE The specimens were closely monitored for signs of corrosion. When corrosion was detected in a specimen, it was demolished to gain access to steel-concrete interface. Measurements of pH using a novel procedure and chloride ion concentration were done on the interface using an adapted in-situ pH measurement and a Florida Department of Transportation procedure respectively. The pH and chloride ion concentrations obtained in this study favor to some extent a dominant intrinsic mechanism interpretation, while the evidence in support of a dominant extrinsic mechanism interpretation remains elusive.

El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por restricciones de la casa editorial donde ha sido publicado. / The washing of Panca chili seeds requires innovative solutions that allow controlling this process. It is necessary to handle variables (conductivity, pH, colorimetry) in the face of the challenge of working with small seeds. At present, there are no machines that are dedicated to the washing of this type of seeds, since in many companies this work is done manually, which is not the one indicated because this technique cannot guarantee homogeneity in the seed washing. In addition, direct handling of this type of seeds can cause irritation to the eyes and skin of the person who maintains contact with the seeds. That is why, it is proposed to make a machine to scale by means of a motorized rotary agitator inside a tank, in order to guarantee the homogeneity of the mixture when washing seeds. The present work will allow to determine, among two different types of agitators (axial and radial), which type of agitator is the most efficient in the washing of seeds of Panca chili, to achieve this objective the measurement of pH and electrical conductivity to the water will be carried after the mixture, after stirring. Finally, the analysis of the tests performed on the mixture obtained and washed by each type of agitator allowed to identify the turbine-type radial agitator, like the one that obtained greater efficiency in the washing of seeds, with respect to the helical agitator and pallets, designed for development of this work, in turn, could also confirm that this type of palette with the conductivity control allows to guarantee the homogeneity of the mixture during washing. © 2021, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG. / Revisión por pares

<p>Self-oscillating behaviour in alkaline Cu(II)-lactate and -tartrate systems has been investigated by in-situ pH and confocal Raman spectroscopy measurements. Formation of Cu(II)-lactate and -tartrate complexes is a key factor underlying the self-oscillations. Dynamic processes in the diffusion layer have been probed to give a better understanding of the self-oscillating process.</p><p>The self-oscillating behaviour is found to be an effect of pH variations in the diffusion layer. Mainly copper is deposited at lower pH values and potentials; at the same time, the pH increases. This is an effect of the dissociation of the Cu(II)-complex during electrochemical reduction. The absence of a buffer within a given pH region is crucial to the fast and sudden pH increase and thereby to the positive potential shift, where cuprous oxide is deposited. A precipitation reaction probably decreases the pH again, leading to a negative potential shift, and copper again begins to deposit. The concentration and strength of the buffer in the electrolyte affect the appearance of the oscillation pattern. The pH and temperature of the bulk electrolyte also influence the self-oscillations. The deposit consists of copper and cuprous oxide, where the composition of the phases deposited is a function of the working-electrode potential. Cuprous oxide is deposited at the higher potentials and mainly copper at the lower potentials.</p><p>Finally, two-dimensional arrays of Cu/Cu₂O microcylinders have been deposited using the Cu(II)-lactate system through the application of a template method.</p>

Self-oscillating behaviour in alkaline Cu(II)-lactate and -tartrate systems has been investigated by in-situ pH and confocal Raman spectroscopy measurements. Formation of Cu(II)-lactate and -tartrate complexes is a key factor underlying the self-oscillations. Dynamic processes in the diffusion layer have been probed to give a better understanding of the self-oscillating process. The self-oscillating behaviour is found to be an effect of pH variations in the diffusion layer. Mainly copper is deposited at lower pH values and potentials; at the same time, the pH increases. This is an effect of the dissociation of the Cu(II)-complex during electrochemical reduction. The absence of a buffer within a given pH region is crucial to the fast and sudden pH increase and thereby to the positive potential shift, where cuprous oxide is deposited. A precipitation reaction probably decreases the pH again, leading to a negative potential shift, and copper again begins to deposit. The concentration and strength of the buffer in the electrolyte affect the appearance of the oscillation pattern. The pH and temperature of the bulk electrolyte also influence the self-oscillations. The deposit consists of copper and cuprous oxide, where the composition of the phases deposited is a function of the working-electrode potential. Cuprous oxide is deposited at the higher potentials and mainly copper at the lower potentials. Finally, two-dimensional arrays of Cu/Cu2O microcylinders have been deposited using the Cu(II)-lactate system through the application of a template method.

[pt] Uma preocupação significativa durante a produção de óleo e gás é a garantia de escoamento para evitar desperdício de tempo e dinheiro. Devido às mudanças nas condições durante a produção (como pressão e temperatura), principalmente na região do pré-sal brasileiro, a solubilidade dos componentes do petróleo bruto (óleo-gás-água) pode diminuir, resultando na formação de depósitos. A incrustação é geralmente causada por parafina, hidratos e sal inorgânico. Neste trabalho, foram desenvolvidos modelos utilizando estratégias de Aprendizado de Máquina para monitoramento da formação de incrustações inorgânicas e medição de parâmetros de processo associados com formas de remediação de obstruções de outras fontes. Primeiramente, foram criados modelos do processo de formação de incrustação de carbonato de cálcio na presença de monoetilenoglicol (inibidor de hidrato) usando a arquitetura de redes neurais feedfoward prever o pressão diferencial um e cinco instantes à frente, obtendo um R2 superior a 92,9 porcento para ambos os horizontes de predição. O segundo tópico explorado foi desenvolver modelos para determinação do pH em sistemas pressurizados (até 6,0 MPa) por meio de análise de imagens. Podendo ser aplicados no monitoramento de sistemas como Sistema Gerador de Nitrogênio, utilizado para remediar alguns problemas de incrustação, dado que sua cinética depende fortemente do pH do sistema. Foram criados modelos de classificação para o pH do sistema (2, 3, 4, 5, 6, 7, 8, 9, 10) usando Redes Neurais Convolucionais (CNN), Máquina de Vetor de Suporte e Árvores de Decisão. Além disso, modelos CNN foram construídos para predizer o pH na faixa de 2- 10. / [en] A significant concern during oil and gas production is flow assurance to avoid loss of time and money. Due to production conditions changes (such as pressure and temperature), especially in the Brazilian pre-salt region, the solubility of the components of the crude oil (oil-gas-water) can decrease, resulting in the formation of deposits. The fouling is usually caused by wax, gas hydrate, and inorganic salt (scale). In this work, models were developed using Machine Learning strategies for scale formation monitoring and measuring process parameters associated with remediation of obstruction from other sources. First, models for the calcium carbonate scaling formation process in the presence of monoethylene glycol (typical gas hydrate inhibitor) were created using feedforward neural network architecture to predict the differential pressure (deltaP) one and five steps ahead, obtaining an R2 higher than 92.9 percent for the training and test group for both the prediction horizon. The second approach explored was the development of models for determining the pH in atmospheric and pressurized systems (up to 6.0 MPa) using image analysis. These models could be applied to control and monitor the Nitrogen Generation System, which can be used for different flow assurance problems, and its kinetics strongly depend on the system s pH value. This step initially created classification models for the system pH (2, 3, 4, 5, 6, 7, 8, 9, 10) using the Convolution Neural Networks (CNN), Support Vector Machine, and decision tree architectures. Also, CNN models were built to predict the pH in the range of 2-10.

Abstract Morbid obesity is the most rapidly increasing health threat of developed countries, and the costs caused by it are already higher than those of smoking. In an increasing number of developing countries both starvation and morbid obesity are increasing simultaneously. Obesity in children and adolescents is also increasing rapidly. Conservative treatment almost invariably fails when treating morbid obesity. Results of pharmacotherapy have been disappointing after great expectations. Laparoscopic gastric banding has been used in the treatment of morbid obesity since 1993. The method was first used mostly in Europe. In the USA either an open or laparoscopic gastric bypass have been the most common methods of surgery. The aim of this study was to investigate the operation results of 280 patients operated in Vaasa Central Hospital during the 11 years after March 1996. Of these patients, 123 have been followed at least 5 years. The results have been analyzed with BAROS that measures the quality of life. Quality of life was measured prospectively 1 year after surgery with the 15D questionnaire that is validated in the Finnish population. The effect of gastric banding in esophageal motility and reflux was studied prospectively in 31 patients. Late results were analyzed in 123 patients 11 years after the first operation. Mean excess weight loss (EWL) was 56% in patients who had their band in place 7 years after surgery, and 46% in all patients. There was no mortality related to the operation, and there was only one serious complication. Disease-specific quality of life improved in 78.8% of the patients in 28 months of follow-up. Health-related quality of life was significantly improved 12 months after surgery, but improvement was not connected to the amount of weight loss. The band inhibited reflux 19 months after surgery. Complications, failures, and reoperations increase with longer follow-up. Weight loss is moderate 9 years after a gastric banding operation, and in carefully selected patients this operation is still a good option in the treatment of morbid obesity.

This master‘s thesis studies problems of chosen active substances in cosmetic emulsions and gels. There is their main characteristics – distribution and properties of cosmetic emulsions and gels, preparation of the active substances, effects on the skin and conditions, which could them influence. In experimental part, preparation of gels and emulsions bases was described which were than enriched by active substances - evening primrose oil, hemp oil, Salvia officinalis extract, Symphytum officinale extract and sea salt. Properties of these cosmetic gels and emulsions bases with the addition of active substances depend on temperature and method of storage, amount of light exposure, method of preparation and another conditions. Action of these factors can cause changes of the stability, thereby the cosmetics effects on the skin can be lost. On the bases of performed rheology measurements (oscillation and flow measurements), pH measurements and sensory analysis were determined, if the properties of examined samples were changed. The measurement was performed in the certain time intervals and the properties were evaluated like at laboratory temperature 23±2 °C, so after exposure to temperature regime 37 °C in thermoregulator. On the basis of performed measurements, there was determined, that gel base with addition of Symphytum officinale extract had the most stability properties.