This thesis focuses on analysis and improvement of the process of production order. The solution is implementation of Shop floor management system in a production workshop. It is presented as a project based on analysis of the company and the order process. The project consists of a draft of implementation during continuous operations and costs calculation for implementation of the system.

This dissertation is aimed to analyze current status of the company information system, to reveal it's weak points, then to explore theoretical possibilities of a solution and finally to design a new solution of information system.

The Diploma thesis deals with process improvements in project management in Alstom Power s.r.o.. The thesis is divided into three basic parts - theoretical, analytical and proposal part. The theoretical part focuses on the description of the analytical methods for examining the business environment, which will afterwards be used to analyse the current state of a company's position in the second part, analytical part, of this work. In the analytical part are identified the same errors during the project implementation. In the last part of the own proposals are presented measures that could eliminate errors and streamline process of the project implementation.

The Diploma thesis deals with process improvements in project management in Alstom Power s.r.o.. The thesis is divided into three basic parts - theoretical, analytical and proposal part. The theoretical part focuses on the description of the analytical methods for examining the business environment, which will afterwards be used to analyse the current state of a company's position in the second part, analytical part, of this work. In the analytical part are identified the same errors during the project implementation. In the last part of the own proposals are presented measures that could eliminate errors.

This thesis deals with problems of process management in a field of savings identification with the goal of an analysis of a chosen process and creation of a proposal for current status improvement from a point of effectivity. It describes process management, process modeling and improvement and project management. Further it presents a current status of the process, project logic frame, net analyzis and risk identification. Finally it shows a map of future proces with an identification of weak points and suggestions for improvement for an organization to improve state of the field of savings identification.

In the cassava production the conventional tillage, characterized by soil preparation with intensive mobilization, is commonly used. However, when this practice results in the maintenance of small quantities of straw on the soil surface, the erosion becomes imminent, and it is exacerbated by the spacing and slow initial development of this culture, especially until four months after planting. An alternative is the no-tillage system, a type of conservation tillage, in which only the owing/planting furrow is prepared for the deployment of culture, and is widely used in soybean, corn, wheat, beans, and others crops. For cassava, the adoption of this system has raised many questions on the basis of the soil physical properties recommended, according to which the crop requires well-drained and loose soils to allow the proper root development, where the carbohydrates produced by the plant are stored. It is believed that the deployment of a larger soil area in furrow may facilitate the proper development of cassava in no-tillage system and promote the soil protection due the maintenance of straw on the surface. In this context, the objective is improve the furrow opener device of cassava planters using the precepts of the agricultural machinery development process, with the intent of provide the cultivation of cassava in no-tillage system. For the furrow opener development it were implemented the informational, preliminary and detailed design phases of the product development process. It where formulated for the task of preparing the planting furrow, 31 needs of customers who were deployed in 30 customer requirements and then in 27 design requirements. From these requirements and the solutions available on other agricultural machines and implements, the winged tines where selected as a potential solution. So, a layout study where conducted and resulted in the construction of prototypes with different geometries to experimentation with cassava crop and tests of forces. The use of the reference model for the development process of agricultural machinery allowed the development of furrow opener device for the cultivation of cassava in no-tillage system, that have low cost, small number of components, simple manufacturing process and smooth operation. The yield obtained with the cassava crop in conventional tillage and no-tillage was similar, showing that this technique can be used to grow without com / No sistema de produção da mandioca o preparo convencional do solo (intenso revolvimento) é comumente utilizado. Quando esta prática resulta na manutenção de pequenas quantidades de palha sobre o solo, o problema da erosão se torna eminente e é agravado pelo espaçamento entre linhas e o lento desenvolvimento inicial desta cultura, principalmente até os quatro meses após o plantio. Uma alternativa é o sistema plantio direto, em que apenas o sulco de semeadura/plantio é preparado durante a implantação da cultura, e é largamente utilizado nas culturas de soja, milho, trigo, feijão, entre outras. Para a mandioca, a adoção deste sistema tem gerado muitas dúvidas em função das condições físicas do solo recomendadas, segundo as quais a cultura requer solos bem drenados e soltos para possibilitar o adequado desenvolvimento das raízes. Acredita-se que a mobilização de uma maior área de solo no sulco de plantio possa viabilizar o adequado desenvolvimento da mandioca em sistema plantio direto e favorecer a proteção do solo pela manutenção da palha sobre superfície. Nesse contexto, objetivou-se aperfeiçoar o mecanismo sulcador de plantadoras de mandioca utilizando os preceitos do processo de desenvolvimento de máquinas agrícolas, com o intento de viabilizar o cultivo de mandioca em sistema plantio direto. Para o desenvolvimento do mecanismo foram executadas as fases de projeto informacional, preliminar e detalhado. Formularam-se, para a função de preparar o sulco de plantio, 31 necessidades de clientes que foram desdobradas em 30 requisitos de clientes e posteriormente em 27 requisitos de projeto. A partir destes requisitos e das soluções disponíveis em outras máquinas e implementos, selecionou-se a haste sulcadora alada como potencial solução. Desta forma, realizou-se um estudo de leiautes que culminou na construção de protótipos com diferentes geometrias para testes, experimentação com a cultura da mandioca e ensaio de esforços. A utilização do modelo de referência para o processo de desenvolvimento de máquinas agrícolas permitiu o desenvolvimento de uma haste sulcadora alada de baixo custo, pequeno número de componentes, processo de fabricação simples e bom funcionamento. A produtividade obtida com a cultura da mandioca em preparo convencional e sistema plantio direto foi semelhante, evidenciando que esta técnica pode ser utilizada para o cultivo sem comprometer a produtividade e ainda melhorar a sustentabilidade do sistema.

The content of this diploma thesis is an analysis of the current information system and a proposal for possible system efficiency. The work is divided into three parts. The first is focused on the theoretical starting points explaining the basic concepts used in the diploma thesis. The second part includes company introduction and the analysis of the information system. Based on the analysis of the information system is the last part, which contains the proposal for improving the information system of UXA spol. s r.o.

The diploma thesis focuses on project controls in the company Veolia Voda Česká republika a.s. It analyses and evaluates specific project, which is already running in the company and on the basis of acquired data it is seeking to optimalise the preparation of another project. It contents many of comparisions and evaluations, which should be helpful for the company´s management.

This thesis deals with the implementation of quality management system in the project of Metro of London, implemented by Otis a.s. The theoretical part describes quality management tools. In the analytical part, there are mapped processes of project of Metro of London and identified problems and opportunities for improvement of processes of this project. Based on this analysis of outputs, there are designed corrective moves and their evaluation for defined problems.

With its core in adaptability and change responsiveness, the Agile methodology has become a popular application of the project process within the often volatile environment of today’s software development projects. The Agile methodology emphasizes interaction between project roles over documentation and formal processes. This higher interaction increases the need for functioning information dissemination throughout the entire project process. The study was carried out at a small sized Swedish IT consultancy firm. The company wished to acquire a project management and planning software tool to support the entire project process and all involved project roles. However, awareness of areas in the project process in need of support was not entirely clear. Therefore, the objective of the study was to investigate the company’s application of the Agile project process and identify potential challenges. Furthermore, the objective was to investigate how a project management and planning software tool can support the Agile project process within software development. The thesis was carried out as an abductive case study, where qualitative data collection methods and literature studies were combined. As a result from the study, two main conclusions have been drawn. Firstly: requirements engineering, the customer role, communication, and knowledge transfer were concluded as prominent challenges in the project process in need of increased support. Secondly, a project management and planning software tool can support the project process by: increasing the communication and collaboration abilities, providing holistic and historical project overview, providing a single storage location, and providing structure. Furthermore, the study has also shown that the project management and planning software tool needs to interact with the Agile project process in order to provide successful support. As final contribution, the Interaction model was created. The model visualizes the main areas in which a project management and planning software tool must interact with the Agile process, in order to support the entire project process successfully. / Genom dess anpassningsförmåga och förändringsmottaglighet har den Agila metodiken blivit en populär tillämpning för projektprocessen inom mjukvaruutveckling, en miljö där snabba förändringar tillhör vardagen. Den Agila metodiken framhäver interaktion mellan projektroller  framför  dokumentation  och  formella  processer,  vilket  ökar  behovet  av fungerande informationsspridning genom hela projektprocessen. Studien  har  utförts  hos  ett  mindre  svenskt  IT-konsultföretag,  vilket  önskade  att införskaffa en programvara för ett projektlednings- och planeringsverktyg som kan stötta hela  projektprocessen  och  alla  involverade  projektroller.  Medvetenheten  kring  de områden i projektprocessen som är i behov av stöd var däremot inte helt tydlig. Målet med   studien   var   därför   att   undersöka   företagets   tillämpning   av   den   Agila projektprocessen  och  identifiera  eventuella  utmaningar.  Vidare  var  målet  också  att undersöka hur en programvara för ett projektlednings- och planeringsverktyg kan stödja den Agila projektprocessen inom mjukvaruutveckling. Examensarbetet utfördes som en abduktiv fallstudie där flera kvalitativa datainsamlingsmetoder användes tillsammans med litteraturstudier. Som resultat av studien har två huvudslutsatser dragits. För det första; kravhantering, kundrollen, kommunikation  och  kunskapsöverföring  identifierades som framträdande utmaningar i projektprocessen i behov av ökat stöd. För det andra, att en programvara för ett projektlednings- och planeringsverktyg kan stödja projektprocessen genom att; förbättra  kommunikations-  och  samarbetsmöjligheterna,  ge  en  övergripande  och historisk projektöverblick, fungera som en gemensam lagringsplats och tillhandahålla struktur.  Vidare  har  studien  visat  att  en  programvara  för  ett  projektlednings-  och planeringsverktyg  måste  interagera  med  den  Agila  projektprocessen  för  att  ge  ett effektivt  stöd.  Som  ett  slutligt  bidrag  skapades  "the  Interaction  model",  vilken visualiserar huvudområdena inom vilka en programvara för ett  projektlednings- och planeringsverktyg måste interagera med projektprocessen för att ge ett fullt stöd till processen.