Orientador: Ana Flávia Nogueira / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Química / Made available in DSpace on 2018-08-24T11:57:50Z (GMT). No. of bitstreams: 1 SantosJunior_GarbasAnacleto_M.pdf: 5163839 bytes, checksum: 6d357533b5e3fc16413a4febf8f9d075 (MD5) Previous issue date: 2014 / Resumo: Neste trabalho são apresentados os resultados da preparação e caracterização de eletrólitos poliméricos usando matriz polimérica de um copolímero derivado de PEO - poli (óxido de etileno-co-2-(2-metoxietoxi) etil glicidil éter) - P(EO-EM) - visando à substituição do par redox, I/I3 , usualmente mais comum em células solares do tipo DSSC, por pares de íons de metais de transição, como Fe e Co . Os eletrólitos foram preparados utilizando razões mássicas fixas de P(EO-EM):GBL de 30-70%. Para os eletrólitos de ferro foram utilizados os sais de FeCl2 + FeCl3·6H2O e para os eletrólitos de cobalto CoCl2 · 6H2O + CoF3. Em ambos os casos foram estudados razões molares entre os cátions de valência II:III de 1:1 e 10:1. Diferentes razões mássicas foram estudadas, sendo estas de 2, 5, 8 e 16% para os eletrólitos de ferro e de 1, 2, 3 e 5% para os eletrólitos de cobalto. Valores máximos de condutividade para os eletrólitos contendo sais de ferro foram de 1,88 x 10 e 1,40 x 10 S cm-1, para concentrações de 16% de sal e razões de 1:1 e 10:1 (Fe:Fe), respectivamente. Enquanto que no caso dos eletrólitos contendo cátions de cobalto foram de 1,41 x 10 e 1,16 x 10 S cm, para concentrações de 5% de sal e razões de 1:1 e 10:1 (Co:Co), respectivamente. Testes de PIA- Photoinduced Absorption Spectroscopy mostraram a eficiência do par redox Fe para regeneração dos corantes L0, N719, D35 e Z907. Entretanto, os mesmos testes mostraram a eficiência do par redox Co para regeneração somente do corante L0. A confecção de dispositivos do tipo DSSC com eletrólitos contendo sais de Fe e Co apresentaram resultados insatisfatórios, possivelmente relacionado com a alta taxa de recombinação do elétron ejetado no TiO2 com os mediadores redox / Abstract: This work presents the results of the preparation and characterization of polymer electrolytes using polymeric matrix of a PEO copolymer-poly (ethylene oxide-co-2-(2-methoxyethoxy) ethyl glycidyl ether) - P (EO-EM) - in order to substitute the redox couple , I-/I3-, usually most common mediators in DSSC solar cells, by transition metal ions pairs, such as Fe and Co . The electrolytes were prepared using fixed P(EO-EM) : GBL weight ratios of 30-70 % . The iron electrolytes were prepared using FeCl2 + FeCl3 o 6H2O salts and CoCl2 o 6H2O + CoF3 were used for the cobalt electrolytes. In both cases, it was studied the molar ratios between cations with valence of II: III of 1:1 to 10:1. Different weight ratios were studied, 2 , 5, 8 and 16% for iron electrolytes and 1 , 2, 3 and 5% for the cobalt electrolytes . Maximum conductivity values for the electrolyte containing iron salts were 1.88 x 10 and 1.40 x 10 S cm at salts concentrations of 16 % and ratios from 1:1 to 10:1 (Fe:Fe), respectively. While in the case of electrolyte containing cobalt cations the conductivity values were 1.41 x 10 and 1.16 x 10 S cm -1 at salts concentrations of 5 % and ratios from 1:1 to 10:1 ( Co:Co), respectively . PIA tests - Photoinduced Absorption Spectroscopy- showed the efficiency of the FeII/III redox couple for the regeneration of L0 , N719 , Z907 and D35 dyes. However, the same tests have shown that the CoI redox couple were only able to regenerate the L0 dye. The DSSC devices with electrolytes containing Fe and Co salts showed unsatisfactory results, possibly related to the high rate of recombination of the electron ejected in TiO2 with the redox mediators / Mestrado / Quimica Inorganica / Mestre em Química

The Master‘s thesis deals with the topic of perovskite solar cells with the main focus on the materials used for the active layer. In the introductory part, the electrical and optical properties of halide perovskites are described and specific examples of perovskite crystals are introduced. The description of impedance and photoimpedance measurement methods used for characterization of perovskite solar cells is also included in the thesis. The measurement of electrochemical impedance spectroscopy was conducted on four perovskite crystals and equivalent circuit was formed to fit the obtained data. Parameters of the circuit elements were acquired using the fitting method and were further evaluated in experimental part of this thesis.

The diploma thesis deals with the study of perovskite solar cells with a regular n-i-p architecture. The theoretical part of this work is mainly focused on the stability of perovskite solar cells, i.e. thermal stability and the influence of UV radiation on final perovskite solar cell stability. Furthermore, the deposition methods, the architecture of solar cells and the materials used for the preparation of electron and hole transport layers were described in more detail. The experimental part deals with the optimization of the preparation of perovskite solar cells (especially in terms of resulting photovoltaic conversion efficiency), with a description of the structure preparation process of the final photovoltaic cell and the interpretation of the measured results.

This document includes methods of testing and measuring of the protective layers used in solar panels with crystallic solar cells. The main emphasis here is placed on the degradation of these materials due to exposure to strong electric field. Main point of diploma thesis is evovle an experimental workplace for electric aging of dielectric materials and monitor changes of material properties. Final knowledges are then analysed with the climate degradation tests. Tested samples were prepared in cooperation with Solartec s.r.o.

This work deals with study of shadow effect on solar system characteristic. The general aim is to design and create solar module for study of shadow effect and measurement under solar simulator.

This thesis discusses modern methods for fast defect detection of solar cells. For the means of the defect classification, the technological production process of crystalline silicon solar cells is described. The defects are researched by the electroluminescence and prohtoluminescence methods. The Photoluminiscence method is improved by the posibility of using different wavelenght of excitacion sources. The range of using in industrial production is determined for the discussed methods.

Master's thesis is aimed at the use of given type of laser in the solar cells manufacturing. The first part of thesis is focused on photovoltaic theory, lasers and photovoltaic applications of solid-state lasers. Second part of thesis is practical realization of theoretical analysis. The evaluation of laser usability for variety of applications on solar cells and recommendation for entry settings on laser.

This work deals with determination defects in solar cells using non-destructive methods. Defects are determinating by electroluminescence method and microplasma method in temperature influence. Temperature will be changed by Peltier cells. By using this various temperatures during the testing we can receive more objective results thanks to simulated operation conditions.

This work deals with the modern diagnostic methods of defects detection of solar cells. Defects are detected by electroluminescence and photoluminescence methods. The main focus of this work is an innovation workplace for measuring solar cell defects at very low temperatures using photoluminescence. Liquid nitrogen is used to cooling solar cells. By using low temperatures can be detection methods to obtain more objektive results of diagnostic defects.

This thesis deals with the issue of quantum efficiency measurement of optoelectronic devices. The physical nature of silicon solar cells is explained here. In addition, the quantum efficiency as a concept is introduced. There is also discussed the influence of a solar cell semiconductor structure on the quantum efficiency itself. Furthermore, the thesis is focused on the design of an experimental set-up for automated measurement and data acquisition. The final realization of the step motor control unit is described in detail. It includes local and/or remote operations, design and development motivation. The next chapter is dedicated to analysis of the Matlab source code for remote operation, data acquisition and presentation. The final part of the thesis gives attention to experiments with real structures, not only the solar cells. The obtained results of analyzed measurements are presented at the conclusion.