Solar power tower technology can achieve higher temperatures than the most common commercial technology using parabolic troughs. In order to take advantage of higher temperatures, new power cycles are needed for generating power at higher efficiencies. Supercritical carbon dioxide (S-CO2) power cycle is one of the alternatives that have been proposed for the future concentrated solar power (CSP) plants due to its high efficiency. On the other hand, carbon dioxide can also be a replacement for current heat transfer fluids (HTFs), i.e. oil, molten salt, and steam. The main disadvantages of the current HTFs are maximum operating temperature limit, required freeze protection units, and complex control systems. However, the main challenge about utilizing s-CO2 as the HTF is to design a receiver that can operate at high operating pressure (about 20 MPa) while maintaining excellent thermal performance. The existing tubular and windowed receivers are not suitable for this application; therefore, an innovative design is required to provide appropriate performance as well as mechanical strength. This research investigates the application of s-CO2 in solar power tower plants. First, a computationally efficient method is developed for designing the heliostat field in a solar power tower plant. Then, an innovative numerical approach is introduced to distribute the heat flux uniformly on the receiver surface. Next, different power cycles utilizing s-CO2 as the working fluid are analyzed. It is shown that including an appropriate bottoming cycle can further increase the power cycle efficiency. In the next step, a thermal receiver is designed based on compact heat exchanger (CHE) technology utilizing s-CO2 as the HTF. Finally, a 3MWth cavity receiver is designed using the CHE receivers as individual panels receiving solar flux from the heliostat field. Convective and radiative heat transfer models are employed to calculate bulk fluid and surface temperatures. The receiver efficiency is obtained as 80%, which can be further improved by optimizing the geometry of the cavity.

Les centrales solaires à concentration industrielles consomment 4 m3/MWh d’eau pour le refroidissement de leur cycle thermodynamique. En environnement aride, cela est susceptible d'induire des conflits d’usages sur une ressource encore plus fondamentale que l’électricité, l'eau. Ce constat met en évidence la nécessité de concevoir des solutions alternatives de refroidissement sèches mais tout aussi efficaces. Le champ solaire d’une centrale CSP représente 50% de son coût d’investissement pour n’être utilisé que de jour pour la production de chaleur nécessaire au cycle thermodynamique. L'approche du sujet de thèse consiste à utiliser cette surface considérable comme macro-échangeur de chaleur avec son environnement via un transfert thermique couplé avec l'air ambiant (convectif) et avec l'espace extra-atmosphérique à 3K (radiatif). Après avoir démontré la pertinence des matériaux du champ solaire pour une telle application, le travail de thèse a montré expérimentalement qu'au-delà d'extraire les chaleurs fatales du cycle thermodynamique, il pouvait aussi produire du froid par transfert radiatif nocturne. Une solution alternative innovante pour le refroidissement des centrales solaires CSP offrant deux nouvelles fonctionnalités à leur champ solaire déjà existant au bénéfice de son amortissement. / Industrial concentrated solar power plants consume 4 m3/MWh of water to cool down their thermodynamic cycle. In arid area, it could induce conflicts of use on a more fundamental resource than electricity. This fact highlights the need to develop alternatives dry cooling technologies but equally effective. The solar field represents 50% of the investment cost of a CSP plant to be used only daily for the heat production needed for the thermodynamic cycle. The approach of the project is to use this huge area as macro-heat exchanger with its surrounding environment through a coupled heat transfer with the ambient air (convective) and with outer space at 3K (radiative). After validating the compatibility of solar field materials for a such application, these research works has shown experimentally that in addition to extract the waste heat of the thermodynamic cycle, it could also produce cold by night radiative cooling. An innovative alternative solution for cooling CSP plants offering two new features to their already existing solar field for the benefit of its paying off.

[pt] O presente trabalho consiste na integração de um campo solar em uma usina de gaseificação de resíduos sólidos urbanos no município de Boa Esperança em Minas Gerais. Os resíduos sólidos acumulados no lixão da cidade são utilizados como insumos para a geração de gás de síntese no reator químico da unidade. Esta operação recupera a extensa área degradada deste vertedouro permitindo a instalação do campo solar com coletores de calhas parabólicas. O intuito do projeto é o fornecimento contínuo de calor pelo campo solar através da instalação de tanques de armazenamento direto de calor. A operação do campo solar é simulada pela elaboração de uma rotina computacional no software Matlab através do método das diferenças finitas unidimensional. A solução numérica do sistema de equações diferenciais que compõe o balanço de energia do receptor solar é validada pela comparação com o teste experimental do Laboratório Nacional de Sandia do concentrador solar SEGS LS-2 com tubo absorvedor evacuado. Além disso, o controle da vazão mássica circulante pelo campo solar é incorporado na lógica computacional de modo que a temperatura na saída do campo solar seja mantida com valores próximo ao set-point de 390 graus Celsius. Portanto, as simulações computacionais com proposições sobre a partida e operação do campo solar são testadas para dias ensolarados do ano meteorológico típico de Boa Esperança. Finalmente, um dia real com nebulosidade é simulado para a análise do funcionamento do campo solar de acordo com a variação intermitente da irradiância direta normal. Os resultados da operação do dia real são utilizados como base para a aplicação da presente rotina computacional em futuros projetos do campo solar. / [en] This work intends to hybridize a solar field into the current waste to energy gasification power plant in Boa Esperança in Minas Gerais. The gasification process converts municipal solid waste to usable synthesis gas for electrical production. This current operation of waste to energy power plant removes waste accumulated from the landfill site. It recovers an extensive area for future solar field installation due to this available space without any waste in the future. The design of the planned solar field comprises the parabolic trough concentrating systems. The aim of the solar design is to provide ongoing heat to the power block with direct storage tanks. The solar field operation is simulated by the development of a Matlab computer program based one dimensional implicit difference method with energy balance approach of an evacuated receiver. The validation of present model was done by comparing the outlet temperatures of simulation results and the experimental data obtained by Sandia National Laboratories. Moreover, the mass flow rate is regulated through the field to make sure that the outlet temperature from the solar collector is kept as close to the desired 390 Celsius Degree as possible. To accomplish the main purpose of the work, many different computational models with start-up and full operation stages are suggested for different clear days along the typical meteorological year of the city Boa Esperança. Eventually, a cloud day with a real meteorological data was chosen for a computational model of the solar field performance. All results of the real day operation are used to improve the computer program of the present work. These results are useful for future solar field design.