The Gull Rapids area, Manitoba, lies on the Superior craton margin and forms part of the Superior Boundary Zone (SBZ), a major collisional zone between the Archean Superior craton and the adjacent Paleoproterozoic Trans-Hudson Orogen. There are two main rock assemblages at Gull Rapids: orthogneisses (of possible Split Lake Block origin) and supracrustal rocks (metavolcanic and metasedimentary). Late, crosscutting felsic and mafic intrusive bodies (mostly dykes and sills) are used to constrain the relative and absolute timing of deformation and metamorphism. <br /><br /> The Gull Rapids area records a complex tectonic history. The area experienced four generations of Neoarchean ductile and brittle deformation (G1 ? G4) and one of Paleoproterozoic ductile-brittle deformation (G5). G1 deformation produced the main foliation in the map area, as well as local isoclinal folding which may be related to an early shearing event. M1a prograde mid-amphibolite facies metamorphism is contemporaneous with the early stages of G1. Widespread, tight to isoclinal sheath folding during G2 was recorded in the supracrustal assemblage, and is the result of southwest-side-up, dextral shearing during the early shearing event. A ca. 2. 68 Ga widespread phase of granitoid intrusion was emplaced late-G1 to early-G2, and is rich in metamorphic minerals that record conditions of M1b upper-amphibolite facies peak metamorphism. M1b metamorphism, late-G1 to early-G2 deformation, and intrusion of this felsic phase are contemporaneous. M2 retrograde metamorphism to mid-amphibolite facies was recorded sometime after M1b. G1 and G2 structures were re-folded during G3, which was then followed by G4 southwest-side-up, dextral and sinistral shearing, contemporaneous with late pegmatite intrusion at ca. 2. 61 Ga. This was followed by mafic dyke emplacement at ca. 2. 10 Ga, and then by G5 sinistral and dextral shearing and M3 greenschist facies metamorphism or hydrothermal alteration at ca. 1. 80 Ga. <br /><br /> Deformation and metamorphism at Gull Rapids post-dates emplacement and deposition of gneissic and supracrustal rocks, respectively. This deformation and metamorphism, except for G5 and M3, is Neoarchean (ca. 2. 68?2. 61 Ga), and represents a significant movement of crustal blocks: km-scale shearing of the supracrustal assemblage and consequent uplift of the Split Lake Block. Late deformation and metamorphism (G5, M3) may be related to the Paleoproterozoic Trans-Hudson orogeny. The Neoarchean and Paleoproterozoic zircon populations in the geochronological data suggest that the Gull Rapids area largely experienced Neoarchean deformation and metamorphism with a weak Paleoproterozoic overprint. All of the evidence presented above suggests that the Gull Rapids area lies in a part of the Superior Boundary Zone, yet does not lie at the exact margin of the Superior craton, and therefore does not mark the Archean-Proterozoic boundary proper in northeastern Manitoba.

The Early Permian strata of the Hongliuhe Group, NW China, experienced a thin-skinned fold-and-thrust belt style of deformation that recorded the final stages of amalgamation of the Beishan orogenic collage, a part of the Central Asian Orogenic Belt. The Hongliuhe Group was syn-orogenically deposited on an undetermined foreland, with the Mazongshan arc terrane acting as the hinterland. In this study results from detailed mapping combined with a regional analysis elucidate involvement of a northward-dipping subduction system with the collision. Well-preserved fold-and-thrust belt style deformation mapped in the upper stratigraphy of the Hongliuhe Group exhibits dominantly south-southeast verging structure, including shear folding, low-angle thrust ramping, imbrication and duplexing. Restoration of a portion of a mapped outcrop-scale cross-section estimates the accommodation of a minimum of 24% shortening. Lower stratigraphy shows discrete, steeper, north-over-south dip-slip ductile shear zones that bound packages of less deformed Hongliuhe Group strata. Fault displacement is considered to have been prolonged enough to juxtapose basal formations in northerly hangingwalls against upper formations in southerly footwalls. Faulting is closely associated with the creation of large-scale brittle-ductile eye-fold structures that are postulated to be sheath folds. The most examined and mapped structure, 16km wide, is a synclinal structure with axes plunging steeply towards its center. The ellipticity of the exposed bedding traces increases towards the center of the eye-fold, implying a structural relationship with metamorphic shear zones. Except for large-scale folding, the bulk of its strata remain relatively undeformed and have preserved primary soft-sediment deformation structures indicating younging towards the center on both limbs of the synclinal structure. Stratigraphic reconstruction of the Hongliuhe Group that considers the significant faulting shows that the Group's basal conglomerates unconformably overlie a Late-Carboniferous volcanic assemblage. The clast lithotypes of the conglomeratic successions change from polymictic metamorphic rocks at the base to monomictic granitoid clasts mid-section, showing the gradual unroofing sequence of the provenance. The stratigraphic reconstruction shows a general fining upward sequence, transitioning from terrestrial to nearshore marine depositional environments that, and in conjunction with the conglomeratic successions, suggests that the tectonic setting for deposition of the Hongliuhe Group is a foreland basin. Considering the deformation styles reported in this study, the Hongliuhe Group is interpreted to be a foreland fold-and-thrust belt. Stratigraphic reconstruction of the Hongliuhe Group that considers the significant faulting shows that the Group’s basal conglomerates unconformably overlie a Late Carboniferous volcanic assemblage. The clast lithotypes of the conglomeratic successions change from polymictic metamorphic rocks at the base to monomictic granitoid mid-section, showing the gradual unroofing sequence of the provenance. The stratigraphic reconstruction shows a general fining upward sequence through nearshore depositional environments that, and in conjunction with the conglomeratic successions, give interpretation that the tectonic setting for deposition of the Hongliuhe Group is a foreland basin. Considering the deformation styles reported in this study the Hongliuhe Group is interpreted to be a foreland fold-and-thrust belt.

Gediz Graben is a continental extensional basin filled with Neogene sediments. Its margins are controlled by active ~E&amp / #8211 / W-trending fault systems with major system, in terms of total offset and duration of activity, located along the southern margin. The graben evolved as a half graben by the activity of the southern margin during the entire Miocene. Then, the northern margin-bounding structure initiated by Plio&amp / #8211 / Quaternary to form the current configuration of the graben with an inherited asymmetry. The southern margin-bounding fault system forms a graben-facing step-like pattern from the horst block (~2000 m) down to the graben floor (~200 m). The faults become younger towards the graben and the structural maturity decreases in the same direction. Fault plane data suggest ~N&amp / #8211 / S-oriented regional crustal extension through the entire graben history with no evidence of temporal change in the regional extension direction. Minor spatial variations are attributed to poorly defined s3-axis or local stress field anomalies caused by fault interactions. Evolution of the Gediz Graben is a dynamic process as indicated by pronounced changes in the geometry and lateral extend of the southern margin-bounding structures along strike and dip directions. This also influenced the lithofacies, depositional pattern and thickness of the graben fill units. The western Anatolian extension is episodic with earlier (Miocene) and later (Plio&amp / #8211 / Quaternary) phases of extension and intervening short phase of contraction (Late Miocene&amp / #8211 / Early Pliocene). Despite of this fact, evidence for the short-term intervening contractional phase throughout the Gediz Graben is scarce and there is local observation of folds and thrust/reverse faults affecting the AlaSehir formation. These structures suggest that the short-term phase of contraction might have existed but most probably been absorbed by the high rates of extension. This data may further imply that graben evolution from half-graben phase (Miocene configuration) to full graben phase (present day configuration) might be a discontinuous process accompanied by a short-time break in-between.

Adiyaman region is situated within SE Anatolian Fold and Thrust Belt which is a part of Alpine-Himalayan Mountain Belt system. The Belt is evolved as Eurasian plate and Arabian plate amalgamates in SE Anatolia. There are two main contractional deformational periods, Late Cretaceous and Late Miocene, which are followed by a strike slip deformation, during post-Late Miocene characterizing the tectonics of SE Anatolia. Series of folds and thrusts have a trend of almost ENE-WSW direction. The analysis on bedding planes and folds shows around N70E trend. On the other hand, two overthrusts that are closely linked to the folds and a sinistral strike-slip fault with reverse component are differentiated. The overthrust belt with ENE-WSW trend bounds the study area from north with a vergence from north to south and situated on top of folded upper Miocene sequences. Another overthrust and a cross-cutting strike slip fault with reverse component &ndash / Adiyaman Fault- form a &ldquo / pop-up&rdquo / structure (positive flower structure) which is characteristic for in a transpressional regimes manifested in geological cross-sections done from borehole correlations and seismic sections. To conclude, by combining the surface (field data) and subsurface data (seismic and borehole data), the Alidag anticlinal structure that is formed along the Adiyaman Fault are developed after the Late Miocene under transpressional regime.

Reservoir permeability is one of the important parameters derived from well test analysis. Small-scale permeability measurements in wells are usually made using core plugs, or more recently, probe permeameter measurements. Upscaling of these measurements for comparisons with permeability derived well tests (Pressure Build-Up) can be completed by statistical averaging methods. Well Test permeability is often compared with one of the core plug averages: arithmetic, geometric and harmonic. A question that often arises is which average does the well test-derived permeability represent and over what region is this average valid? A second important question is how should the data sets be reconciled when there are discrepancies? In practice, the permeability derived from well tests is often assumed to be equivalent to the arithmetic (in a layered reservoir) or geometric (in a randomly distributed permeability field) average of the plug measures. These averages are known to be members of a more general power-average solution. This pragmatic approach (which may include an assumption on the near-well geology) is often flawed due to a number of reasons, which is tried to be explained in this study. The assessment of in-situ, reservoir permeability requires an understanding of both core (plug and probe) and well test measurements &amp / #8211 / in terms of their volume scale of investigation, measurement mechanism, interpretation and integration. Pressure build-up tests for 26 wells and core plug analysis for 32 wells have valid measured data to be evaluated. Core plug permeabilities are upscaled and compared with pressure build-up test derived permeabilities. The arithmetic, harmonic and geometric averages of core plug permeability data are found out for each facies and formation distribution. The reservoir permeability heterogeneities are evaluated in each step of upscaling procedure by computing coefficient of variation, The Dykstra-Parson&amp / #8217 / s Coefficient and Lorenz Coefficients. This study compared core and well test measurements in South East of Turkey heavy oil carbonate field. An evaluation of well test data and associated core plug data sets from a single field will be resulting from the interpretation of small (core) and reservoir (well test) scale permeability data. The techniques that were used are traditional volume averaging/homogenization methods with the contribution of determining permeability heterogeneities of facies at each step of upscaling procedure and manipulating the data which is not proper to be averaged (approximately normally distributed) with the combination of Lorenz Plot to identify the flowing intervals. As a result, geometrical average of upscaled core plug permeability data is found to be approximately equal to the well test derived permeability for the goodly interpreted well tests. Carbonates are very heterogeneous and this exercise will also be instructive in understanding the heterogeneity for the guidance of reservoir models in such a system.

In order to understand the tectonic evolution of the Kalecik region (Ankara, Turkey), a structural field study was performed in a selected area located in the east of Kalecik, where mostly imbricated thrust sheets of the Cretaceous Ophiolitic melange crop out. In the study area, the Cretaceous Ophiolitic melange, Cretaceous radiolaria-bearing sequences and the Paleocene units are all intruded by sub-vertical dykes. The attitudes of planar structures (dykes, beds and faults) and the kinematic data measured on faults were analyzed by using &ldquo / ROCKWORKS 2002&rdquo / and &ldquo / Angelier Direct Inversion Method (version 5.42)&rdquo / softwares, respectively. A major trend of NE-SW (045&deg / N) direction and relatively a post-Paleocene &ndash / pre-Miocene age was determined for the dykes indicating an extension in the NW-SE direction during post-Paleocene. The dykes cut bedded units displaying a dominant set trending in WNW-ESE (297&deg / N) direction and mostly dipping towards NE with moderate dip amounts. But at the same time, the Upper Cretaceous units were observed as intensely folded, faulted and thrusted due to the compressional regime that acted in Central Anatolia during Late Cretaceous. The angular difference between the major trend of dykes and the dominant trend of stratification was found as approximately 108&deg / ., which may also indicate that the dykes and beds were evolved during different deformation periods. The results of the kinematic analyses of different age faults revealed that the post-Paleocene &ndash / pre-Miocene Kalecik basaltic dykes are deformed under a continuous NW-SE-oriented post-Paleocene compressional to strike-slip tectonic regime which was followed by a NNW-SSE oriented post-Miocene extensional-transtensional regime.

The Thrace Basin located in northwest Turkey displays attractive prospective traps for hydrocarbon and has received much attention from the petroleum industry. Despite the extensive exploration efforts, there are only few studies which address the fault kinematics and deformation mechanism of the region in connection with structural development. In this study, 3D raw seismic data set collected around Temrez High near Babaeski fault zone will be processed and interpreted along with the available borehole data to reveal the subsurface structure of the region that will contribute towards understanding the Neogene tectonic evolution of the central Thrace basin, origin of the transcurrent tectonics and possible role of the North Anatolian Fault Zone.

This study aims to investigate tectonic activity levels and development stages of the tectonic and hydrologic basin areas located on western part of the main trace of the North Anatolian Fault Zone (NAFZ) using quantitative measurement techniques. The basins investigated are Bolu, Yeni&ccedil / aga, D&ouml / rtdivan, &Ccedil / erkes, Ilgaz and Tosya. The methodology includes application of six morphometric indices (Basin Shape, Hypsometric curve and Hypsometric Integral, Sinuosity of Mountain Fronts, Stream Length Gradient Index, Valley width to height ratio, and Asymmetry Factor) to Digital Elevation Model (DEM) of the region generated from 1:25000 scale topographic maps. The analyses indicate that the basins located in the study area have different characteristics of tectonic activity. According to the results of the applied indices relative order of the activity for tectonic basins is, in decreasing order, Bolu, Tosya, Ilgaz, &Ccedil / erkes, Yeni&ccedil / aga and D&ouml / rtdivan. For hydrologic basins, on the other hand, the same order is observed except for a swap in &Ccedil / erkes and Yeni&ccedil / aga basins. Among the basins located to the north of the NAFZ, the activity decreases eastward whereas to the south the fault zone it decreases towards the west.

published_or_final_version / abstract / toc / Earth Sciences / Master / Master of Philosophy

This study investigates evidence for linkages and fault interactions centred on the Cust Anticline in Northwest Canterbury between Starvation Hill to the southwest and the Ashley and Loburn faults to the northeast. An integrated programme of geologic, geomorphic, paleo-seismic and geophysical analyses was undertaken owing to a lack of surface exposures and difficulty in distinguishing active tectonic features from fluvial and/or aeolian features across the low-relief Canterbury Plains. LiDAR analysis identified surface expression of several previously unrecognised active fault traces across the low-relief aggradation surfaces of the Canterbury Plains. Their presence is consistent with predictions of a fault relay exploiting the structural mesh across the region. This is characterised by interactions of northeast-striking contractional faults and a series of re-activating inherited Late Cretaceous normal faults, the latter now functioning as E–W-striking dextral transpressive faults. LiDAR also allowed for detailed analysis of the surface expression of individual faults and folds across the Cust Anticline contractional restraining bend, which is evolving as a pop-up structure within the newly established dextral shear system that is exploiting the inherited, now re-activated, basement fault zone. Paleo-seismic trenches were located on the crest of the western arm of the Cust Anticline and across a previously unrecognised E–W-striking fault trace, immediately southwest of the steeply plunging Cust Anticline termination. These studies confirmed the location and structural style of north-northeast-striking faults and an E–W-striking fault associated with the development of this structural culmination. A review of available industry seismic reflection lines emphasised the presence of a series of common structural styles having the same underlying structural drivers but with varying degrees of development and expression, both in the seismic profiles and in surface elevations across the study area. Based on LiDAR surface mapping and preliminary re-analysis of industry seismic reflection data, four fault zones are identified across the restraining bend structural culminations, which together form the proposed Oxford–Cust–Ashley Fault System. The 2010–2012 Canterbury Earthquake Sequence showed many similarities to the structural pattern established across the Oxford–Cust–Ashley Fault System, emphasising the importance of identification and characterization of presently hidden fault sources, and the understanding of fault network linkages, in order to improve constraints on earthquake source potential. Improved understanding of potentially-interactive fault sources in Northwest Canterbury, with the potential for combined initial fault rupture and spatial and temporal rupture propagation across this fault system, can be used in probabilistic seismic hazard analysis for the region, which is essential for the suitability and sustainability of future social and economic development.