Spelling suggestions: "subject:"[een] TENSILE TEST"" "subject:"[enn] TENSILE TEST""
1 |
Preparation and Characterization of Nitrate Ester Plasticized Polyether for Propellant BinderYeh, Ying-Lin 20 December 2012 (has links)
Polyurethane network binders were synthesized using polyethylene glycol (PEG) prepolymers, cellulose acetate butyrate (CAB), curative [Desmodur N100 (N100) or Desmodur N3200 (N3200)], and catalyst [dibutyltin dilaurate (DBTDL)]. Triacetin (TA) was added as plasticizer before the reaction. Polyurethanes were prepared by varying the molar ratio of ¡VNCO/-OH, weight ratio of TA/PEG, molecular weight of PEG, the amount of catalyst, the order of adding catalyst and curative, and the stirred time. Synthesized polyurethanes were characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), tensile tests, and swelling tests to study their reaction, degradation, thermal, and mechanical properties. When the ratio of ¡VNCO/-OH was between 1.2 and 1.4, polyurethane gave the best mechanical properties. Additionally, the quenched polyurethane had a lower degree of crystallinity When the weight ratio of TA and PEG was bigger than 2, crystallization of polyurethane could be minimized during the tensile testing or after quenching. In this study, it was found that PEG with molecular weight of 4000 yielded the best mechanical properties. These results indicate that better and uniform mechanical properties can be obtained by using enough stirring time via varying the amount of catalyst and adding catalyst before curing agent.
|
2 |
Development of inhibitors based on organic-inorganic hybrid materials via sol-gel processLi, Yi-chun 04 July 2006 (has links)
Oligomers of hard and soft segments of unsaturated polyesters (UP) were synthesized. They were blended in different ratios and cured with various amounts of styrene. Based on the criteria of tensile strength and strain, hard segment/soft segment (60/40 wt %) UPs containing 35 wt % and 45 wt % of extra amount of styrene were chosen for further studies. Inorganic-organic hybrid materials were prepared by incorporating tetraethoxysilane and poly(dimethylsiloxane) into the UP resins via the sol-gel process by changing the ratios of HCl/TEOS, H2O/TEOS, TEOS/PDMS and the reaction time. The specimens of these hybrid materials after curing were characterized using the tensile tester, rheometer, scanning electron microscope (SEM), 29Si-NMR and thermogravimeter. In the condition of HCl/TEOS molar ratio 0.07, H2O/TEOS molar ratio 4, TEOS/PDMS weight ratio 90/10 and the reaction time 3 hours, the results of 29Si-NMR, SEM and silicone mapping indicate that these silica gels with 3D network were well dispersed in the UP resins. These specimens had tensile strength of 512¡Ó16 kgf/cm2 and elongation of 11¡Ó4 % which are above the criteria of inhibitors. From the erosion testing, flame retardants was added unsaturated polyester and inorganic-organic hybrid materials that can help to resist heat flame, remain of a fire on the surface had the char forming.
|
3 |
The mechanical design of turgid plant tissuesStuhlen, Birgit January 1998 (has links)
No description available.
|
4 |
Biomechanická reflexe scaffoldu na mechanické zatěžování / Biomechanical response of scaffold on mechanical loadingAnděrová, Jana January 2014 (has links)
The purpose of this work is to identify the parameters of scaffold's mechanical properties by observing/monitoring their response to defined external mechanical strain. The first part of the work is summarizing the knowledge about the required properties of scaffolds, their production and the factors influencing production. The practical part of the work concerns itself with measurement, analysis and evaluation of data based on proprietary methodology. Based on the results at this stage of the research, we can confirm, that scaffolds have viscoelastic, or viscoplastic character and its response depends on the magnitude of deformation, state of hydration, ratio of solutions and period of networking. Keywords: scaffod, tensile test, rheologic model
|
5 |
Nanotribological and Nanomechanical Investigation of NanomaterialsZhang, Jiangnan 16 September 2013 (has links)
This dissertation primarily documents the quantification of the interfacial behavior of carbon based nanomaterials, which includes two categories, one is the nanofriction properties evaluation of aligned carbon nanotube carpets, few-layer graphene as well as three types of functionalized graphene nanoribbons, the second is the mechanical characterization of individual functionalized carbon nanofibers and the interfacial fracture toughness quantification in carbon nanotube/polymer derived ceramics nanocomposite. The aligned carbon nanotube carpets have a highly anisotropic friction behavior, which means the friction force are lower for transversely aligned CNTs side than for vertically aligned CNTs surface. We can also tune the friction properties of graphene ribbons by grafting different functional groups. In addition, two narrow angular regions with high friction, separated by a wide angular interval with low friction, were identified between graphene and highly oriented pyrolytic graphite. The distance between the two friction peaks is 61◦, which corresponds well with the 60◦ symmetry of individual atomic layers in the graphite lattice. The technique that involves the usage of mcirodevices and nanoidenter was used to conduct tensile tests on pristine, fluorinated and amino-functionalized carbon nanofibers, which were found to exhibit varied load-bearing abilities and unique fracture modes. The technique was also used to perform single fiber pullout experiments to study carbon nanotube/polymer derived ceramic interface.
|
6 |
Manufacturing and Mechanical Properties of AS4/PEEK Nanocomposite LaminatesWu, Chun-Hsien 07 July 2004 (has links)
The work aims to manufacture AS-4/PEEK APC-2 nano-composite laminates first. We used the prepreg form of AS-4 Graphite/PEEK laminae to make APC-2 laminates of 2 mm thick with two lay-ups of cross-ply and quasi-isotropic totally 16 plies by a hot press via the modified diaphragm curing. The nano-particles SiO2 with the average diameter of 15¡Ó5 nm were uniformly spread in the specific interfaces of laminate. From mechanical testing it is found that the nanocomposite specimens of spreading 10 plies nanoparticles (3% by wt. of matrix) possesses the highest mechanical properties. we see that in cross-ply specimens the ultimate strength increases 10.91 % and stiffness 6.7 %; while in quasi-isotropic specimens the ultimate strength increases 12.48 % and stiffness 19.93 %.
Second, repeat the tensile tests at 50, 75, 100, 125, 150¢J to receive respective stress-strain curve , strength and stiffness. At elevated temperatures the ultimate strength decreases slightly below 75¢J and the elastic modulus reduces slightly below 125¢J, however, both properties degrade highly at 150¢J ( Tg) for two layups generally.
Finally, the constant stress amplitude tension-tension cyclic testing was conducted. It is found that both the stress-cycles (S-N) curves are very close below 104 cycles for cross-ply laminates w/wo nanoparticles, and the S-N curve of nano-laminate slightly bent down after 105 cycles. Whilst in quasi-isotropic laminates, the S-N curve of nano-laminate is always slightly below that of APC-2 laminate through the life.
|
7 |
Deformation Behaviour of TiNi Shape Memory Alloys under Tensile and Compressive LoadsShahirnia, Meisam 08 June 2011 (has links)
TiNi shape memory alloys (SMAs) have been extensively used in various applications. The great interest in TiNi alloys is due to its unique shape memory and superelasticity effects, along with its superior wear and dent resistance. Shape memory and superelastic effects are due to a reversible martensitic transformation that can be induced either thermally or mechanically. In this study, indentation tests at different temperatures, loads and strain rates have been performed on superelastic TiNi alloy. Deformation characteristics of superelastic TiNi under indentation have been compared to AISI 304 steel as a conventional material. Also, in-situ optical microscopy tests with interrupted heating have been employed in order to gain an insight into the coupled deformation and reversible martensitic transformation behaviour of TiNi SMAs under tensile loads. An understanding of the impacts of strain rate and temperature on the deformation behaviour of TiNi SMAs under localized compressive loads has been proposed.
|
8 |
A molecular dynamics modeling study on the mechanical behavior of nano-twinned Cu and relevant issuesYue, Lei Unknown Date
No description available.
|
9 |
A molecular dynamics modeling study on the mechanical behavior of nano-twinned Cu and relevant issuesYue, Lei 11 1900 (has links)
As a candidate for dynamic electric contacts, Nano-twinned copper has intrinsic conductivity and enhanced fretting resistance. To better understand its general mechanical behavior, we conduct molecular dynamics simulation studies to investigate responses of nano-twinned copper to stress and to one-directional and two-directional sliding processes, in comparison with single crystal and nano-grained model systems. Obtained results suggest that the twin boundary blocks dislocation movement more effectively and the degree of emitting dislocations under stress is considerably lower than that of grain boundary. The inverse H-P relation only occurring in nano-grained materials does not necessarily result from grain boundary sliding. Under sliding conditions, dislocations are easier to be generated in the single crystal system. During the two-directional sliding process, Bauschinger effect is observed in the single crystal and nano-twinned systems, while the situation is opposite for the nano-grained system. The nano-twinned Cu shows the least dislocation accumulation during two-directional sliding. / Materials Engineering
|
10 |
Failure Analysis of High Nickel Alloy Steel Seal Ring Used in TurbomachineryWang, Wenbo 23 March 2017 (has links)
The system of upper high nickel alloying steel seal ring and lower high nickel alloying steel seal ring, installed in the grooves of turbine, can extend out and fit with the wall of valve cage, resulting in forming a good seal under the pressure. In the project, the failure steel seal ring is considered. This situation had threatened the safety of the whole steam turbine system. The purpose of this study is to identify the failure cause of the steel seal ring used in nuclear steam turbines. New high nickel steel alloy seal ring was compared with the failed seal ring. The dimensions of macroscopic ring with clearly plastic deformation were measured using calipers. Surface morphology of ring was observed by optical microscopy through metallographic analysis. There is a lot of precipitation in the grain boundaries of used seal ring, along with smaller grain size than the new seal ring. To explore the composition of precipitation, scanning electron microscopy (SEM) with energy-dispersive spectrometer (EDS) were used. The results indicated that the concentration of titanium (Ti) and molybdenum (Mo) was higher in the precipitation of used seal ring. At the same time, the hardness and elastic modulus of used seal ring were reduced, measured by nanoindentation test. In-situ SEM tensile testing were used to record and analyze the generation of crack source and crack development under applied load. The reasons of the seal ring failure can be answered because of these experimental results at both macroscopic and microscopic scales.
The main reason of the seal ring failure is a combination of long-term stress and elevated temperature during turbine operation. Complex work environment caused recrystallization and recovery, resulting in grain refinement and secondary phase precipitation. Further embodiment, recrystallization and recovery caused the elastic modulus and hardness of used seal ring decrease. Moreover, a lot of secondary phase precipitates appeared at grain boundaries during use. The appearance of secondary phase precipitates become the weakest part of used seal ring. The applied load lead to seal ring failure from the formation of microvoids to microvoids aggregated becoming microcracks until to the appearance of cracks at macroscopic scale. These changes of microscopic structure ultimately reflected in critical plastic deformation of used seal ring.
|
Page generated in 0.0285 seconds