One copy microfiche. / Thesis (MEng)--Stellenbosch University, 1998. / ENGLISH ABSTRACT: The flow resistances in the inlet sections of counterflow wet-cooling towers are investigated and correlations are derived for inclusion in a one-dimensional tower performance model. The rain zone loss is modelled using analytical-numerical methods. Experimental verification of the model produces satisfactory confirmation of the method's general validity. Semi-empirical correlations are produced to predict the loss coefficient as a function of six dimensionless variables for both rectangular and circular cooling towers. In addition, a study is made of the heat and mass transfer in the rain zone and its influence on tower performance. The inlet loss coefficients for dry, isotropically packed, circular and rectangular counterflow cooling towers are determined experimentally and empirical correlations are formulated to fit this data. The inlet losses for isotropic-resistance-fill towers are found to be higher than those for orthotropic-resistance-fill towers. Computational fluid dynamics is used to investigate the dependence of the inlet loss coefficient on the rain zone characteristics. The rain zone loss generally dampens the inlet loss, but this coupling is indirect and necessitates a large amount of dependent variables. The numerical model is validated by means of experimental data for dry towers and it is found that the degree of accuracy achieved for circular towers exceeds that for rectangular towers. Consequently, the correlation derived to predict this occurrence for circular towers, can be applied more confidently than its rectangular counterpart. An example is presented wherein the improved accuracy iQ tower performance prediction, when applying this correlation, is shown. Additional measures for tower performance enhancement are also explored. / AFRIKAANSE OPSOMMING: 'n Studie is gemaak van vloeiweerstande in die inlaat seksie van nat teenvloei koeltorings met die oog op die afleiding van korrelasies om die verskynsels, vir gebruik in puntmodel koeltoring simulasies, te voorspel. Die reensone verlies is gemodelleer met behulp van 'n analities-numeriese metode. Die model is geverifieer met behulp van eksperimentele toetse. Semi-empiriese korrelasies word afgelei wat die verlies, as 'n funksie van ses dimensielose veranderlikes, vir beide ronde en reghoekige koeltorings, voorspel. Daar word ook 'n studie gemaak van die hitte en massa oordrag in die reensone en hoe dit koeltorings se termiese oordrags vermoe be'invloed. Die inlaat verlies vir droe, isotropies gepakte, ronde en reghoekige koeltorings is eksperimenteel bepaal en empiriese korrelasies is geformuleer om die data te pas. Daar is gevind dat die inlaat verlies vir isotropies gepakte torings hoer is as die vir ortotropies gepakte torings. Numeriese vloei dinamika is gebruik om die afuanklikheid van die inlaat verlies se grootte op die reensone se eienskappe te ondersoek. Die algemene tendens is vir die reensone om die inlaat verlies te demp, maar die afuanklikheid is indirek sodat 'n groot aantal veranderlikes benodig word om die demping te karakteriseer. Die numeriese model word geverifieer deur middel van eksperimentele data vir droe koeltorings en daar word tot die gevolgtrekking gekom dat ronde torings heelwat meer akuraat gemodelleer word as reghoekige torings. Dit veroorsaak dat die korrelasie wat afgelei is om die demping te voorspel vir ronde torings, met baie meer vertroue toegepas kan word as sy reghoekige eweknie. 'n Voorbeeld word gedoen om die verbeterde akuraatheid in koeltoring modellering, wat verkry kan word met behulp van die vergelyking, te wys. Bykomende matrieels, om torings se verkoelings vermoe te verbeter, word ook ondersoek.

Thesis (MSc)--Stellenbosch University, 2003 / ENGLISH ABSTRACT: A tower of global function fields :F = (FI, F2' ... ) is an infinite tower of separable extensions of algebraic function fields of one variable such that the constituent function fields have the same (finite) field of constants and the genus of these tend to infinity. A study can be made of the asymptotic behaviour of the ratio of the number of places of degree one over the genus of FJWq as i tends to infinity. A tower is called asymptotically good if this limit is a positive number. The well-known Drinfeld- Vladut bound provides a general upper bound for this limit. In practise, asymptotically good towers are rare. While the first examples were non-explicit, we focus on explicit towers of function fields, that is towers where equations recursively defining the extensions Fi+d F; are known. It is known that if the field of constants of the tower has square cardinality, it is possible to attain the Drinfeld- Vladut upper bound for this limit, even in the explicit case. If the field of constants does not have square cardinality, it is unknown how close the limit of the tower can come to this upper bound. In this thesis, we will develop the theory required to construct and analyse the asymptotic behaviour of explicit towers of function fields. Various towers will be exhibited, and general families of explicit formulae for which the splitting behaviour and growth of the genus can be computed in a tower will be discussed. When the necessary theory has been developed, we will focus on the case of towers over fields of non-square cardinality and the open problem of how good the asymptotic behaviour of the tower can be under these circumstances. / AFRIKAANSE OPSOMMING: 'n Toring van globale funksieliggame F = (FI, F2' ... ) is 'n oneindige toring van skeibare uitbreidings van algebraïese funksieliggame van een veranderlike sodat die samestellende funksieliggame dieselfde (eindige) konstante liggaam het en die genus streef na oneindig. 'n Studie kan gemaak word van die asimptotiese gedrag van die verhouding van die aantal plekke van graad een gedeel deur die genus van Fi/F q soos i streef na oneindig. 'n Toring word asimptoties goed genoem as hierdie limiet 'n positiewe getal is. Die bekende Drinfeld- Vladut grens verskaf 'n algemene bogrens vir hierdie limiet. In praktyk is asimptoties goeie torings skaars. Terwyl die eerste voorbeelde nie eksplisiet was nie, fokus ons op eksplisiete torings, dit is torings waar die vergelykings wat rekursief die uitbreidings Fi+d F; bepaal bekend is. Dit is bekend dat as die kardinaliteit van die konstante liggaam van die toring 'n volkome vierkant is, dit moontlik is om die Drinfeld- Vladut bogrens vir die limiet te behaal, selfs in die eksplisiete geval. As die konstante liggaam nie 'n kwadratiese kardinaliteit het nie, is dit onbekend hoe naby die limiet van die toring aan hierdie bogrens kan kom. In hierdie tesis salons die teorie ontwikkel wat benodig word om eksplisiete torings van funksieliggame te konstrueer, en hulle asimptotiese gedrag te analiseer. Verskeie torings sal aangebied word en algemene families van eksplisiete formules waarvoor die splitsingsgedrag en groei van die genus in 'n toring bereken kan word, sal bespreek word. Wanneer die nodige teorie ontwikkel is, salons fokus op die geval van torings oor liggame waarvan die kardinaliteit nie 'n volkome vierkant is nie, en op die oop probleem aangaande hoe goed die asimptotiese gedrag van 'n toring onder hierdie omstandighede kan wees.

Thesis (MScEng)--Stellenbosch University, 1997. / One copy microfiche. / ENGLISH ABSTRACT: This project concerns the investigation of parameters controlling the behaviour of full-cone spray nozzles of the type used in cooling towers. In the present study large medium pressure hollow and full cone nozzles were investigated. A literature survey provided insight into the relationships between the nozzle dimensions and their spray characteristics, while equations found in the literature were used to correlate the experimental data. It was found that the spray cone angle of hollow cone nozzles could be manipulated by using rounded orifice outlets and this finding lead to the development of a uniquely profiled outlet that actually produces a square spray pattern. More experimental work was done to determine the relationship between the central jet of a full-cone nozzle and the other major nozzle dimensions. These results were then correlated and formulated into a set of guidelines for designing full-cone nozzles. / Digitized at 300 dpi Colour PDF format (OCR), using ,KODAK i 1220 PLUS scanner. Digitised, Ricardo Davids on request from Corinna 01 October 2014 / AFRIKAANSE OPSOMMING: Hierdie projek behels 'n studie van belangrike parameters in volkegel sproeimondstukke soos gebruik in koeltorings. In die huidige studie word groot mediumdruk holkegel en volkegel sproeimondstukke ondersoek. 'n Literatuurstudie het die nodige insig verskaf omtrent die verwantskap tussen mondstuk dimensies en hul spuitkarakteristieke, terwyl vergelykings uit die literatuur gebruik is om die eksperimentele data te korreleer. Dit was gevind dat die sproeir kegelhoek van die holkegelmondstuk verander kon word deur gebruik te maak van geronde uitlate. Afleidings wat gemaak is het gely tot die ontwikkeling van 'n unieke geprofielde uitlaat wat 'n vierkantige sproeipatroon gelewer het. Bykomstige eksperimentele werk is gedoen om die verwantskap tussen die sentralestraal van 'n volkegelmondstuk en die ander hoof mondstukdimensies te bepaal. Die reultate is verwerk om riglyne vir die ontwerp van vierkantige patroon volkegel mondstukke daar te stel.

Thesis (MEng)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: This thesis investigates the flow field and pressure distributions around cylinders at trans-critical Reynolds numbers using the k-ε Realizable turbulence model. A steady state 2-D and 3-D Fluent® model is successfully developed to evaluate the effects of changing various modelling parameters on the static pressure distribution around an infinite and finite cylinder. These parameters include surface roughness, cylinder rotation and air viscosity at the cylinder surface. The subsequent results obtained are compared to each other and to data trends from literature as well as measured experimental results and are found to be in good agreement. In addition a method for calibrating all developed methods based on their shear stress curves over a flat plate model is also successfully developed. The main objective is to find an appropriate single parameter which can be used for the rigorous adjustment of the pressure distribution around a cooling tower, which will allow for improved sensitivity analysis and modelling of cooling tower performance under wind conditions with and without meridional ribs located on the outer shell surface. / AFRIKAANSE OPSOMMING: Hierdie tesis ondersoek die vloeiveld en druk verdelings rondom silinders by trans-kritiese Reynolds getalle deur gebruik te maak van die k-ε Realizable turbulensie model. ‘n Bestendige toestand 2-D en 3-D Fluent® model is suksesvol ontwikkel om die uitwerking van die verandering van verskeie model parameters op die statiese druk verdeling rondom ‘n oneindige en eindige silinder te evalueer. Die laasgenoemde parameters sluit in oppervlak grofheid, silinder rotasie en lug viskositeit by die silinder wand. Die daaropeenvolgende resultate wat verkry word, word met data tendense uit die literatuur asook gemete data vanuit eksperimente vergelyk en goeie ooreenkoms i.t.v die data tendense is gevind. Verder is ‘n metode vir die suksesvolle kalibrasie van die ontwikkelde numeriese tegnieke ontwikkel. Die laasgenoemde kalibrasie metode is gebaseer op die vergelyking van skuifspanning kurwes vir vloei oor ‘n plat plaat model. Die hoofdoel van die navorsing is om ‘n geskikte enkele parameter te vind wat gebruik kan word vir die effektiewe aanpassing van die druk verdeling rondom ‘n koeltoring wat sal lei tot verbeterde sensitiwiteits analise en modellering van koeltoring verrigting onder wind toestande met en sonder meridionale ribbes geleë op die buitenste dop oppervlak.

An investigation has been carried out to determine the effects of the dissolved solids in process cooling water (pcw) and mine water (mw) on concrete corrosion. An experimental set up was designed to simulate the process in the cooling towers of Sasol (Pty) Ltd at Secunda. The investigation was carried out using Ordinary Portland Cement (OPC) and Portland Blastfurnace Cement (PBFC). The corrosion process was monitored as a function of time by determining the concentrations of the ions left in solution. This was done using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) and Ion Chromatography (lC). The observation, identification and characterization of the secondary phases formed during the corrosion process were analyzed using the Scanning Electron Microscopy(SEM). Energy Dispersive X-ray Microanalysis (EDX) made it possible to identify the various microstructures and quantify their elemental composition. This made it possible to monitor the penetration of sulphate ions in the mortar. Powder X-ray Diffraction (XRD) qualitative analysis was also performed on the test mortar specimens. The organic constituents in process cooling water were determined using Gas Chromatography coupled with a Mass Spectrometer (GC-MS). The corrosion indices which measures the aggressiveness of water solutions towards cement and concrete were calculated for both process cooling water and mine water. The results of the investigation showed that mine water is more corrosive than process cooling water. This observation has been linked to the presence of the organic compounds in process cooling water. The results also indicated that PBFC was mores resistant to chemical attack than ope. / Thesis (M.Sc.)-University of Natal, Pietermaritzburg, 1998.

Light intensity distribution studies in the heterogeneous photocatalytic reactors were carried out successfully with potassium ferrioxalate chemical actinometry, reproducible light intensity estimates of the irradiation source were obtained. The increased light intensity in the reactor system increased the absorption as determined by actinometry. It was found that reflectivity was a dependent variable but mesh opening area was an independent variable. The photocatalytic mineralization of dichoroacetic acid DCAA, in the presence of TiO2 immobilized on a plate in an externally irradiated bubble column photoreactor had been investigated. The mass transfer and activity evaluation were measured. It was found that increasing the catalyst thickness, increased the photoactivity until it reaches the optimum loading, further loading increase caused the reaction rate to remain constant. This phenomenon was observed with increased lamp power (intensity) and initial solute concentration. However, the catalyst activity was not influenced by the increasing concentration of dissolved oxygen. The reaction rate for DCAA photomineralization was expressed using the Langmuir-Hinsheldwood model.

Typescript (photocopy)

In few cities will one find a landscape so scarred with the physical remains of its contentious recent past as Berlin. The capital city boasts recognizable and well-known relics from not only the Third Reich, but also from its time as communist East and capitalist West Berlin. Inconspicuously sitting in two of Berlin’s largest public parks though are two hills not as easily identifiable as other historic sites. Hidden beneath the grassy hills, the massive concrete remains of 1940s flak towers have slowly made their way into the historical consciousness of Berliners. In examining the evolution of the Nazi-built towers in the consciousness of Berliners, this thesis attempts to gain a better understanding of the city’s confrontation with the toxic relics in their landscape left from the Third Reich through a less-recognizable and less-contentious structure. / text

The subject of this thesis is the restoration project of Cin Kule in Payas. The building is one of the unique examples of watch towers dating to 16th century -Classical Ottoman period.

Light intensity distribution studies in the heterogeneous photocatalytic reactors were carried out successfully with potassium ferrioxalate chemical actinometry, reproducible light intensity estimates of the irradiation source were obtained. The increased light intensity in the reactor system increased the absorption as determined by actinometry. It was found that reflectivity was a dependent variable but mesh opening area was an independent variable. The photocatalytic mineralization of dichoroacetic acid DCAA, in the presence of TiO2 immobilized on a plate in an externally irradiated bubble column photoreactor had been investigated. The mass transfer and activity evaluation were measured. It was found that increasing the catalyst thickness, increased the photoactivity until it reaches the optimum loading, further loading increase caused the reaction rate to remain constant. This phenomenon was observed with increased lamp power (intensity) and initial solute concentration. However, the catalyst activity was not influenced by the increasing concentration of dissolved oxygen. The reaction rate for DCAA photomineralization was expressed using the Langmuir-Hinsheldwood model.