No novo contexto do setor elétrico brasileiro, as concessionárias passam a ter uma nova postura quanto à gestão. A energia elétrica, como produto, como negócio, deve levar lucro às empresas concessionárias. Começam a dar mais importância aos custos, entendendo que vários aspectos técnicos devem ser analisados, visando reduzir perdas substanciais. Assim sendo, o transformador de potência assume uma posição destacada, considerando sua posição estratégica no sistema elétrico, fundamental no processo de transporte e entrega de energia elétrica. Por este motivo vem despertando o interesse no desenvolvimento de estudos e pesquisas no sentido de aumentar sua vida útil. O método de Análise da Resposta em Frequência da impedância do transformador permite obter a “assinatura” do mesmo, a fim de verificar futuras degradações. Este método é adotado por várias empresas em todo o mundo, há mais de três décadas. Embora sua ampla aplicação entre muitas técnicas utilizadas na monitoração e análise de falhas em equipamentos, até agora não houve consenso na interpretação dos resultados obtidos por este método. A dificuldade de correlacionar parâmetros com prováveis falhas tem suscitado pesquisas para obtenção de resultados confiáveis e de interpretação fácil. Este trabalho objetiva determinar um modelo elétrico que represente a característica da resposta em frequência para fins de armazenamento de dados e simulações. A partir de dados reais do teste de resposta em frequência da impedância inseridos no modelo proposto, através de um programa computacional, foi verificada a confiabilidade nas respostas obtidas, comparadas com as reais. Os resultados obtidos asseguram que o modelo proposto é viável de ser aplicado. / In the new context of the Brazilian electric industry, the electric power provider companies have adopted a new administration posture. The electric power, as a product and business, should make the companies profitable. They have been paying more attention to the costs, .learning that many technical aspects should be analyzed in order to reduce substantial losses. Therefore, the power transformer takes an outstanding position, considering its strategic position in the electric system and being essential in the process of transport and delivery of the electric power. For this reason, there has been an interest in the development of studies and research in order to increase its useful life. The method of Frequency Response Analysis of impedance of the power transformer permits to obtain reference parameters of this one, in order to verify future degradations. This method has been adopted by many companies throughout the world for over three decades. Despite its wide application among several techniques used in the supervision and analysis of faults of equipments, there has been no consensus in the interpretation of the results obtained by this method so far. The difficulty of correlating the parameters with probable faults have increased research in order to obtain reliable results and of easy interpretation. This study aims to determine an electric model that represents the characteristic of the frequency response in order to store data and simulations. Starting from the real data of the FRA test inserted in the proposed model through a computer program, the reliability of the obtained responses were verified and compared with the real data. The obtained results assure that the proposed model is viable and can be applied.

Electrical substations perform a key role in electrical transmission and distribution; the ability for a substation to remain functional during and after a seismic event contributes significantly to the resilience of the clients supplied. Many legacy components currently installed in the main grid substations were designed with minimal consideration of lateral loads and are not qualified per IEEE693. One of the more critical high-voltage substation components that are vulnerable to earthquake damage is the 500kV freestanding current transformer (CT). The CT is particularly vulnerable due to the slenderness and mass distribution of the component. Current transformers are typically constructed from a combination of aluminum and brittle porcelain. Two novel retrofit measures were investigated utilizing base rocking and supplemental damping to reduce the seismic amplification in the CT while also potentially providing post-earthquake self-centering capability. The retrofit measures utilize both shift in system frequency and energy dissipation through supplemental damping to reduce seismic demands on the CT. The purpose of the research was to conceptually develop, detail design, analyze and experimentally validate the retrofit measures. A desired feature of the retrofit measures was for minimal or no residual displacement following the seismic event, which was implemented in the retrofit through a preloaded centering mechanism. Based on the analyses and experiments, the proposed retrofit measures exhibited significantly decreased demands on the CT and true self-centering.

Traditional means of controlling sound radiated by electrical power transformers involve the construction of large expensive barriers or full enclosures, which cause maintainability and cooling problems. One promising alternative is to use active noise control to cancel the noise. This thesis is concerned with one of the many problems which need to be investigated to develop a practical active noise cancellation system for transformers. This work, in particular, is concerned with the physical system design which includes the selection of the control source types and the evaluation of the near-field sensing strategies. Loudspeakers have been widely used in the past as an acoustic source for canceling transformer noise. The principal disadvantage of using loudspeakers is that to achieve global noise control, a large number, driven by a multi-channel controller, are required. However, if large panels are used in place of loudspeakers as control sources, it is possible that the number of the control sources and complexity of the controller could be reduced substantially. In addition to reducing the number of control sources and simplifying their application, panel sound sources could also overcome some disadvantages of the loudspeakers, such as limited life and deterioration due to the weather. Thus, part of the work described in this thesis is concerned with the development of a resonant curved panel with a backing cavity as an acoustic type source. The advantages of using a curved panel rather than a flat panel are twofold: first a curved panel is more easily excited by the extensional motion of the piezoelectric patch actuators; and second, it is more difficult to adjust the resonance frequencies of the efficient modes of a flat panel than of a curved panel. The analytical models for the design of the panel cavity systems have been developed. As an example, a resonant curved panel with a backing cavity system was constructed and the sound radiation of the system was measured. Results show that a resonant panel-cavity sound source could be used as an alternative to a number of loudspeakers for active cancellation of electric power transformer noise. Due to the advantages of using the vibration type control sources, two types of vibration control sources (inertial electrodynamic shakers and piezoelectric patch actuators) were considered and the mechanical output of the inertial shakers has been compared with that of the piezoelectric actuators. In contrast with the piezoelectric actuators, the resonance frequencies of the inertial shakers can be tuned to the frequencies of interest using simple tuning procedures, so that the output efficiency of the shakers can be increased. The output performance was evaluated for two types of actuators by measuring the structural response of either a panel or a transformer when excited by the actuators at half their rated voltage input. Results demonstrated that a much larger output amplitude at the frequency of interest can be achieved by the tuned inertial type actuators. Two near-field sensing strategies, the minimization of the sum of the sound intensities and the minimization of the sum of the squared sound pressures, have been studied. A quadratic expression was derived for the minimization of the sum of the sound intensities in the near-field. To evaluate the control performances achieved using both sensing strategies, a flat-panel was modelled with a harmonic point force disturbance and several point force control sources. Simulation results show that the control performance could be improved by minimizing the sum of the sound intensities in the hydrodynamic near-field, provided that a very large number of error sensors were used, otherwise better results were achieved using near-field squared pressure sensing. Both sensing strategies were used to predict the noise reductions that resulted for the active noise control of a small transformer in the laboratory environment and for a large electrical power transformer on site. To optimize the locations of the control sources (for the large transformer on site) and the locations of the error sensors (for the small transformer in the laboratory environment), a genetic algorithm (GA), which is an evolutionary optimization technique, was employed as a search procedure to optimize the control source and error sensor locations. The results showed that the control source locations and/or the error sensor locations must be optimized to achieve the maximum sound reduction for either error sensing strategy, especially for the sound intensity minimization; otherwise, the sound field level may increase after control due to the character of the cost function (the sum of the sound intensities). The simulation results were experimentally validated for the small transformer in the laboratory environment. Due to the limitation of the number of controller channels, the control performance was only evaluated for squared pressure minimization. The results demonstrated that for the case of 8 control sources and 8 error sensors, at 100 Hz, an average sound pressure reduction of 15.8 dB was achieved when evaluated at 528 monitoring locations at 0.25 m intervals on a surface that surrounded the transformer. / Thesis (Ph.D.)--Engineering (Department of Mechanical Engineering), 2000.

Full integration of CMOS low noise amplifiers (LNA) presents a challenge for low cost CMOS receiver systems. A critical problem faced in the design of an RF CMOS LNA is the inaccurate high-frequency noise model of the MOSFET implemented in circuit simulators such as SPICE. Silicon-based monolithic inductors are another bottleneck in RF CMOS design due to their poor quality factor. In this thesis, a CMOS implementation of a fully-integrated differential LNA is presented. A small-signal noise circuit model that includes the two most important noise sources of the MOSFET at radio frequencies, channel thermal noise and induced gate current noise, is developed for CMOS LNA analysis and simulation. Various CMOS LNA architectures are investigated. The optimization techniques and design guidelines and procedures for an LC tuned CMOS LNA are also described. Analysis and modeling of silicon-based monolithic inductors and transformers are presented and it is shown that in fully-differential applications, a monolithic transformer occupies less die area and achieves a higher quality factor compared to two independent inductors with the same total effective inductance. It is also shown that monolithic transformers improve the common-mode rejection of the differential circuits. / Graduation date: 1999

One of the most important industrial processes is heat transfer, carried out by heat exchangers in single and multiphase flow applications. Despite the existence of well-developed theoretical models for different heat transfer mechanisms, the expanding need for industrial applications requiring the design and optimization of heat exchangers, has created a solid demand for experimental work and effort. This thesis concerns the use of numerical approaches to analyze and optimize heat transfer and fluid flow in power generation industry, with emphasis on pin fin technology. This research begins with a review on heat transfer characteristics in surfaces with pin fins. Different pin fins shapes with various flow boundaries were studied, and thermal and hydraulic performances were investigated. The impact of parameters such as inlet boundary conditions, pin fin shapes, and duct cross-section characteristics on both flow and heat transfer were examined. Two important applications in power generation industry were considered for this study: power transformer cooling, and condenser for CO2 capturing application in oxy-fuel power plants. Available experimental data and correlations in the literature have been used for models validation. For each case, a model based on current configuration was built and verified, and was then used for optimization and new design suggestions. All numerical modeling was performed using commercial CFD software. A basic condenser design was suggested and examined, supplemented by the use of pin fin technology to influence the condensation rate of water vapour from a CO2/H2O flue gas flow. Moreover an extensive review of numerical modeling approaches concerning this condensation issue was conducted and presented. The analysis results show that the drop-shaped pin fin configuration has heat transfer rates approximating those of the circular pin configuration, and the drop-shaped pressure losses are less than one third those of the circular. Results for the power transformer cooling system show those geometrical defects in the existing system are easily found using modeling. Also, it was found that the installation of pin fins in an internal cooling passage can have the same effect as doubling the radiator’s height, which means a more compact cooling system could be designed. Results show that a condensation model based on boundary layer theory gives a close value to experimental correlations. Considering a constant wall temperature, any increase in CO2 concentration results in lower heat transfer coefficients. This is a subsequence of increased diffusivity resistance between combustion gas and condensing boundary layer. Also it was shown that sensitivity of heat transfer rate to inlet temperatures and velocity values decreased when these parameters increased. The application of numerical methods concerning the condensation process for CO2 capturing required significant effort and running time as the complexity of multiphase flow was involved. Also data validation for the CO2/H2O condenser was challenging since this is quite a new application and less experimental data (and theoretical correlations) exist. However, it is shown that models based on numerical approaches are capable of predicting trends in the condensation process as well as the effect of the non-condensable CO2 presence in the flue gas. The resulting data, conclusions, applied methodology can be applied to the design and optimization of similar industrial heat exchangers, such as oil coolers which are currently working at low efficiency levels. It can also be used in the design of electronic components, cooling of turbine blades, or in other design applications requiring high heat flux dissipation. Finally, the finding on water vapour condensation from a binary mixture gas can be referenced for further research and development in this field.

Magnetic components, such as inductors and transformers, have important effects on the efficiency and performance of switching power supplies; their parasitic properties directly impact the high frequency properties which can cause lot-to-lot variation or unanticipated and non-ideal operation. They are also amongst the most problematic components to design, often requiring numerous design-prototype-test interactions. The electrostatic and electromagnetic analysis of wound components has become more important recently to predict their performance and frequency behavior. Accurate prediction and design of winding parasitic parameters of leakage inductance and winding capacitance for high frequency inductors and transformers in switching power supplies is fundamental to improve performance, lower cost, and speed time to market. This thesis presents a methodology and process to obtain accurate prediction of the inter- and intra-winding capacitances of high frequency magnetic components. Application examples considered are a single-winding choke, a coupled inductor filter, and a multi-winding transformer. Analytical approach for determination of parasitic capacitances in high frequency magnetic components will be covered also. Comparison of the FEA results using JMAG with experimental and empirical formula results show good agreement, supporting the method as a model-based design tool with the potential to significantly reduce the design-prototype-test cycle commonly needed with sophisticated magnetic designs.

Transformers are very important parts of any electrical network, and their size increase so does their price. Protecting these important devices is a daunting task due to the wide variety of operating conditions. This thesis develops a new protection scheme based on state estimation.The foundation upon which our protection scheme is built is the modeling of the single phase transformer system of equations. The transformer equations are composed of polynomial and differential equations and this system of equations involving the transformer's electrical quantities are modeled into a system of equations such that highest degree of each of the system's equations is quadratic―in a process named Quadratization and then integrated using a technique called Quadratic integration to give a set of algebraic companion equations that can be solved numerically to determine the health of the transformer.

A power transformer is one of the most important and expensive components in any power system. Power transformers can be exposed to a wide variety of abnormal conditions and faults. Internal turn-to-turn faults are the most difficult types of faults to detect within the power transformer. The IEEE Standards documents have revealed that there is no one standard way to protect all power transformers against minor internal faults such as turn-to-turn faults and at the same time to satisfy basic protection requirements: sensitivity, selectivity, and speed.<p> This thesis presents a new, simple and efficient protection technique which is based on negative sequence currents. Using this protection technique, it is possible to detect minor internal turn-to-turn faults in power transformers. Also, it can differentiate between internal and external faults. The discrimination is achieved by comparing the phase shift between two phasors of total negative sequence current. The new protection technique is being studied via an extensive simulation study using PSCAD®/EMTDC 1 software in a three-phase power system and is also being compared with a traditional differential algorithm.<p> Relay performance under different numbers of shorted turns of the power transformer, different connections of the transformer, different values of the fault resistances, and different values of the system parameters was investigated. The results indicate that the new technique can provide a fast and sensitive approach for identifying minor internal turn-to-turn faults in power transformers.

A power transformer is one of the most important and expensive components in any power system. Power transformers can be exposed to a wide variety of abnormal conditions and faults. Internal turn-to-turn faults are the most difficult types of faults to detect within the power transformer. The IEEE Standards documents have revealed that there is no one standard way to protect all power transformers against minor internal faults such as turn-to-turn faults and at the same time to satisfy basic protection requirements: sensitivity, selectivity, and speed.<p> This thesis presents a new, simple and efficient protection technique which is based on negative sequence currents. Using this protection technique, it is possible to detect minor internal turn-to-turn faults in power transformers. Also, it can differentiate between internal and external faults. The discrimination is achieved by comparing the phase shift between two phasors of total negative sequence current. The new protection technique is being studied via an extensive simulation study using PSCAD®/EMTDC 1 software in a three-phase power system and is also being compared with a traditional differential algorithm.<p> Relay performance under different numbers of shorted turns of the power transformer, different connections of the transformer, different values of the fault resistances, and different values of the system parameters was investigated. The results indicate that the new technique can provide a fast and sensitive approach for identifying minor internal turn-to-turn faults in power transformers.

In this bachelor thesis several software, capable of calculating andsimulating complex problems concerning the power losses in inductors andtransformers with the finite element method, have been evaluated and used tosolve test cases provided by the commissioner. The software have been evaluatedwith respect to several requirements stated by the commissioner.The aim is to be able to simulate power losses and inductance levels in complexdesigns of inductors and transformers. By reading the manuals to the software, aview of the methods and equations the different software use for their calculationshave been established. The enclosed tutorials have provided the knowledge forthe operations of the different software. By designing the test models providedby the commissioner, a deeper understanding of the work area has been reached.The test results provides an answer for the test models, the behaviour of themagnetic field has been analysed for the models and the calculated power lossesseem to correspond to the behaviour of the prototypes.The evaluation of the software has been done with regard to the commissionersrequirements. The recommendation will be to use either FEMM 4.2 or QuickField5.7, both software have a short training curve and an interface easy to maintain.For problems requiring a transient analysis the recommendation is QuickField, butthe material library maintainability is better in FEMM 4.2. Regarding COMSOLMultiphysics 3.5 and Ansys RAnsoft Maxwell Student Version 9, both softwareare highly qualified for the complex calculations needed for these kind of problems.The training curve for these software is however much longer than for the othertwo software and for the commissioner to be able to fully use all the possibilitiesin the software this will not be efficient.