Previous studies have successfully used near and supercritical water (SCW) for cracking and desulfurization of heavy crude oil and bio-oil, suppressing coke formation as a low-value by-product. Some of these studies benefited from using zeolite catalysts to increase the activity and selectivity toward targeted products; however, in depth studies are required to identify the role of water on zeolite catalysis under supercritical condition. Using three common zeolites, ZSM-5, HY, and β for supercritical water cracking of dodecane at 400°C, 24±2 MPa (in a 100 ml batch reactor), we showed that ZSM-5 is the only catalyst that partially retains its crystalline structure and activity under hydrothermal conditions. Further characterization of the ZSM-5 (used under 50/50 wt% SCW/dodecane feed) revealed 95% decrease in Brønsted acid site (BAS) density and 80% decrease in microporous area after 2 h reaction time. However, compared to the runs where SCW was absent, the apparent dodecane cracking rate constant in SCW decreased only by a factor of 2.6. Examining catalytic activity of ZSM-5 degradation products and re-using ZSM-5 showed that the unexpected activity cannot be ascribed to ZSM-5 degradation products. Using a group-type model, we showed that SCW accelerated gas and suppressed coke formations. Additionally a coke gasification pathway was suggested to account for formation of CO and CO2 in the presence of SCW. Additional experiments with two different ZSM-5 particle sizes suggested that dodecane cracking reaction is diffusion-limited in the absence of SCW and reaction-limited in its presence. Zero length chromatography of calcined and hydrothermally treated ZSM-5 showed 10 times greater apparent diffusivity for un-treated catalyst. This, according to Weisz-Prater analysis, suggested a 250 times greater dodecane surface concentration in the absence of SCW. We successfully optimized the water content of feed (5-15 wt%) to decrease the destructive effects of SCW on the structure, increase the selectivity toward BTEX products and eliminate coke formation.

Previous studies have successfully used near and supercritical water (SCW) for cracking and desulfurization of heavy crude oil and bio-oil, suppressing coke formation as a low-value by-product. Some of these studies benefited from using zeolite catalysts to increase the activity and selectivity toward targeted products; however, in depth studies are required to identify the role of water on zeolite catalysis under supercritical condition. Using three common zeolites, ZSM-5, HY, and β for supercritical water cracking of dodecane at 400°C, 24±2 MPa (in a 100 ml batch reactor), we showed that ZSM-5 is the only catalyst that partially retains its crystalline structure and activity under hydrothermal conditions. Further characterization of the ZSM-5 (used under 50/50 wt% SCW/dodecane feed) revealed 95% decrease in Brønsted acid site (BAS) density and 80% decrease in microporous area after 2 h reaction time. However, compared to the runs where SCW was absent, the apparent dodecane cracking rate constant in SCW decreased only by a factor of 2.6. Examining catalytic activity of ZSM-5 degradation products and re-using ZSM-5 showed that the unexpected activity cannot be ascribed to ZSM-5 degradation products. Using a group-type model, we showed that SCW accelerated gas and suppressed coke formations. Additionally a coke gasification pathway was suggested to account for formation of CO and CO2 in the presence of SCW. Additional experiments with two different ZSM-5 particle sizes suggested that dodecane cracking reaction is diffusion-limited in the absence of SCW and reaction-limited in its presence. Zero length chromatography of calcined and hydrothermally treated ZSM-5 showed 10 times greater apparent diffusivity for un-treated catalyst. This, according to Weisz-Prater analysis, suggested a 250 times greater dodecane surface concentration in the absence of SCW. We successfully optimized the water content of feed (5-15 wt%) to decrease the destructive effects of SCW on the structure, increase the selectivity toward BTEX products and eliminate coke formation.

<p>  </p> <p>Cyclar process was previously developed to convert propane and butane into aromatics using gallium-promoted ZSM-5 zeolites (Ga/ZSM-5). However, it has two major limitations. Firstly, light gases (methane and ethane) limit the yield of higher molecular weight hydrocarbons for propane conversion. Secondly, ethane is unreactive on Ga/ZSM-5 catalysts. Relative rates and selectivity for propane conversion on two components, gallium (Ga/Al2O3) and acid ZSM-5 (H-ZSM-5) were investigated, and the results suggest that light gas was produced by propane monomolecular cracking on ZSM-5 due to the imbalance of alkane dehydrogenation and olefin conversion rates on two catalytic functions. A PtZn alloy catalyst, which has >99% propene selectivity and 30 times higher rate than Ga, was used for the dehydrogenation function. The bifunctional PtZn/SiO2+ZSM-5 catalyst has high yields of aromatics with low methane selectivity (<5%) at ~70% propane conversion. The results suggest methane can be minimized by utilizing the PtZn alloy and lowering the monomolecular cracking rate by ZSM-5. In addition, PtZn alloy increases aromatics selectivity. Aromatics formation pathway was investigated by studying the rate and selectivity of a model intermediate (cyclohexene) on ZSM-5, PtZn/SiO2 and Ga/Al2O3. Benzene is formed at similar rates on Ga/Al2O3 and ZSM-5 but cracking of cyclohexene on the latter is two orders of magnitude higher than the benzene formation rate, indicating cracking of cyclic hydrocarbons leads to low aromatization rate on Ga/ZSM-5. The benzene formation rate on the PtZn/SiO2 is 200 times higher than that on ZSM-5, suggesting aromatics are formed by the metal pathway on PtZn/SiO2+ZSM-5. </p> <p>Unlike Ga/ZSM-5 catalysts, PtZn/SiO2+ZSM-5 catalysts also convert propane to aromatics at low temperature (350 ℃). The temperature effect on propane dehydroaromatization pathways on the PtZn/SiO2+ZSM-5 bifunctional catalysts was investigated to develop strategies for propane conversion to valuable liquid hydrocarbons. At high temperature (550 ℃), high dehydrogenation rates and lower monomolecular cracking rates are required to minimize methane formation, leading to primarily propene and BTX (benzene, toluene, and xylenes). By recycling propene in the propane conversion range of 30-45%, >80% BTX yields is likely achievable at full recycle. At mid temperature (400-450 ℃), the product has high selectivity to gasoline-blending hydrocarbons (butanes, C5+ hydrocarbons, toluene, and xylenes) at 15-25% propane conversions because dehydrogenation rates are moderately high, and oligomerization is more favored than cracking. At low temperature (350℃), ~25% propane conversion is achieved and has high selectivity (~60%) to butanes, but the propane conversion rates are likely too low to be practical. While methane formation by monomolecular cracking limits liquid yields at high reaction temperature, at mid and low temperatures, hydrogen co-produced at high propane conversions saturates light olefins to make undesired ethane, which becomes major yield-loss reaction on the PtZn/SiO2+ZSM-5. </p> <p>Finally, PtZn/SiO2+ZSM-5 catalysts can convert ethane to C3+ and aromatics but the methane selectivity increases rapidly at high ethane conversion. The roles of two catalytic function (Pt-Zn alloy and ZSM-5) in the dehydroaromatization pathways of ethane and propane will be further studied and their product distribution will be compared to have better understandings on the differences in the dominant yield-loss reaction and dehydroaromatization pathways. </p>

The increasing production of natural gas liquids attracts both academia and industry to develop on-purpose techniques converting those light alkanes to value-added chemicals. Dehydroaromatization is an alternative path for light alkane conversion to produce aromatics but still lacks active and stable catalysts. This work aims at the development of efficient dehydroaromatization catalysts by tuning the metal/acid bifunctionality of the Pt/HZSM-5 catalyst. Additionally, through co-processing light alkane with ammonia during the dehydroaromatization process, this study also proposes a new reaction system that could directly link the C-N bond for nitrile synthesis. The results suggested that the activity, selectivity, and stability of the monometallic Pt/HZSM-5 catalyst are highly dependent upon the Pt loading, the limit loading of 100 ppm is required to maintain sufficient metal functionality. To further minimize the Pt loading, the chemical properties of the Pt species were tuned by a second metal such as Zn or Cu. Consequently, the activity and stability of the catalyst are enhanced by orders of magnitude and the maximized metal functionality was achieved at Pt loading of 10 ppm. Characterizations show that Pt can be atomically dispersed as a hybrid [Pt1-Zn6] cluster in the Pt-Zn@HZSM-5 or forming single atom alloy type [Pt1-Cu4] ensembles in the Pt-Cu@HZSM-5. Specifically, the initial turnover frequencies of propane and ethane to BTX are up to 178.8 and 128.7 s-1 over the Pt-Cu@HZSM-5, up to 3-4 orders of magnitude higher than the state-of-the-art Pt-based catalyst. Furthermore, the deactivated catalyst can be continuously regenerated, demonstrating excellent stability of such a catalyst under hash oxidation conditions for coke burn-off. A new catalytic system named ammodehydrogenation (ADeH) for ethane selective conversion to acetonitrile, ethylene, and hydrogen over a bifunctional catalyst is proposed. Ethane ADeH over the Pt/HZSM-5 catalyst is active at low temperatures and atmospheric pressure for CH3CN production. The Pt/HZSM-5 shows high coke-resistibility during the ethane ADeH due to the strong interaction of NH3 with the acid sites of the catalyst. The catalyst can be further optimized by adding Co, the Pt-Co/HZSM-5 catalyst on ethane ADeH indicating that an appropriate balance between the metal and acid functionalities is critical for ethane ADeH.

Yes / The adsorption of acid gas, including hydrogen sulfide and carbon dioxide, by superhigh silica ZSM-5 was investigated. Equilibrium adsorption isotherms of high-purity hydrogen sulfide and carbon dioxide were measured experimentally using this new sorbent. In addition, methane and nitrogen adsorption isotherms on this MFI-type zeolite were also measured as representative of other natural gas components. To enhance the reliability of the results, the adsorption pressure has been selected up to 20 bar at three different temperatures. Superhigh silica ZSM-5 for the adsorption of hydrogen sulfide shows an impressive result of 3.04 mmol·g–1 at 12 bar and 283 K. This value was 2.69 mmol·g–1 for carbon dioxide at 21 bar and 283 K. The adsorption capacity of H2S on the ZSM-5 is the highest, and N2 is the lowest; the order of the adsorption capacities of components is H2S > CO2 > CH4 > N2. The adsorption heat of different adsorbates is calculated: 13.7 and 29.5 kJ·mol–1 for H2S and CO2, respectively. Physical adsorption has occurred on high-silica ZSM-5, especially for hydrogen sulfide, and this is a great advantage. By increasing the temperature, the adsorption capacity of components on the ZSM-5 decreases, but due to differences in the adsorption heat of the adsorbate, the ideal selectivity for hydrogen sulfide increases. There is a challenge in the choice of the best condition for H2S removal, as, by increasing the temperature, the adsorption capacity of hydrogen sulfide reduces, but the selectivity of the hydrogen sulfide increases as compared to other gases. This phenomenon is not true for the selectivity of other components.

The aim is to produce aliphatic liquid hydrocarbons using heterogeneous ethylene oligomerization. Thiscould potentially produce renewable synthetic fuels. Heterogeneous catalysis has some advantages overhomogeneous catalysis regarding some sustainability aspects. To achieve this, a setup was built using a heatedfixed bed reactor with an in-situ has chromatography to study conversion and gaseous products, and ex-situGC as well as NMR for analyzing liquid products. Ethylene was oligomerized on a commercial ZSM-5 zeoliteunder varying temperature conditions and feed gas dilution with hydrogen or helium. The gas and liquidproducts were analyzed and evaluated. Additionally, the ZSM-5 was studied at different silica to alumina ratios. The thesis discusses how conversion, liquid yield and selectivity of gas products using GC together withanalysis of liquid products using H-NMR can be used as a simple and quick evaluation. The liquid product isevaluated by the distribution of olefinic and aromatic hydrocarbon species using the hydrogen signal area inthe characteristic chemical shifts of olefinic and aromatic hydrogen. At 250-400oC, 6 bar of ethylene, with andwithout feed dilution, and WHSV of 204 h-1, conversion was consistently above 95% for the diluted 400oCruns. Though the liquid yield fell to around 6%, compared to the best yield at 18% for the pure 300oC run.Diluting the feed had a positive effect on increasing olefinic hydrogen signal while decreasing aromatichydrogen signal. The difference between diluting with H2 or helium had a surprisingly small effect. Decreasingthe Si/Al ratio had no significant effect on performance, while increasing the Si/Al ratio made the zeolite loseits catalytic ability. With a pure ethylene feed the lowest aromatic hydrogen signal was found at 350oC, whilethe olefinic signal did not vary too much with temperature. With diluted feed the higher temperature did leadto a lower olefinic hydrogen signal and higher aromatic hydrogen signal.

Made available in DSpace on 2014-12-17T15:41:53Z (GMT). No. of bitstreams: 1 ViniciusPSC_DISSERT.pdf: 2657914 bytes, checksum: beb97c8aaf506ef6b97930de865d3dd2 (MD5) Previous issue date: 2011-02-25 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The catalytic processes play a vital role in the worldwide economy, a business that handles about US$ 13 billion per year because the value of products depends on the catalytic processes, including petroleum products, chemicals, pharmaceuticals, synthetic rubbers and plastics, among others. The zeolite ZSM-5 is used as catalyst for various reactions in the area petrochemical, petroleum refining and fine chemicals, especially the reactions of cracking, isomerization, alkylation, aromatization of olefins, among others. Many researchers have studied the hydrothermal synthesis of zeolite ZSM-5 free template and they obtained satisfactory results, so this study aims to evaluate the hydrothermal synthesis and the physicochemical properties of ZSM-5 with the presence and absence of template compared with commercial ZSM-5. The methods for hydrothermal synthesis of zeolite ZSM-5 are of scientific knowledge, providing the chemical composition required for the formation of zeolitic structure in the presence and absence of template. Samples of both zeolites ZSM-5 in protonic form were obtained by heat treatment and ion exchange, according to procedures reported in the literature. The sample of commercial ZSM-5 was acquired by the company Sentex Industrial Ltda. All samples were characterized by XRD, SEM, FTIR, TG / DTG / DSC, N2 adsorption and desorption and study of acidity by thermo-desorption of probe molecule (n-butylamine), in order to understand their physicochemical properties. The efficiency of the methods applied in this work and reported in the literature has been proved by well-defined structure of ZSM-5. According as the evaluation of physicochemical properties, zeolite ZSM-5 free template becomes promising for application in the refining processes or use as catalytic support, since its synthesis reduces environmental impacts and production costs / Os processos catal?ticos desempenham um papel vital na economia mundial, um neg?cio que movimenta aproximadamente US$13 bilh?es por ano, pois o valor dos produtos depende dos processos catal?ticos, incluindo os produtos petrol?feros, qu?micos, farmac?uticos, borrachas sint?ticas e pl?sticos, entre outros. A ze?lita ZSM-5 ? utilizada como catalisador em rea??es nas ?reas petroqu?mica, petrol?fera e qu?mica fina, destacando-se as rea??es de craqueamento, isomeriza??o, alquila??o, aromatiza??o de olefinas, entre outras. Muitos pesquisadores t?m estudado a s?ntese hidrot?rmica da ze?lita ZSM-5 ausente de direcionador org?nico estrutural e obtiveram resultados satisfat?rios, assim, este estudo visa avaliar a s?ntese hidrot?rmica e as propriedades f?sico-qu?micas da ZSM-5 com a presen?a e aus?ncia de direcionador org?nico estrutural, em compara??o com ZSM-5 comercial. Os m?todos para a s?ntese hidrot?rmica da ze?lita ZSM-5 s?o de conhecimento cient?fico, fornecendo a composi??o qu?mica necess?ria para a forma??o da estrutura zeol?tica em presen?a e aus?ncia de direcionador org?nico estrutural. As amostras de ambas as ze?litas ZSM-5 na forma prot?nica foram obtidas atrav?s de tratamentos t?rmicos e troca i?nica, de acordo com procedimentos relatados na literatura. A amostra de ZSM-5 comercial foi concedida pela empresa Sentex Industrial Ltda. Todas as amostras foram caracterizadas por DRX, MEV, FTIR, TG/DTG/DSC, Adsor??o e dessor??o de N2 e estudo da acidez por termodessor??o de mol?cula sonda (n-butilamina), a fim de compreender suas propriedades f?sico-qu?micas. A efici?ncia dos m?todos aplicados no presente trabalho e relatados na literatura foi comprovada pela estrutura bem definida da ze?lita ZSM-5. Conforme a avalia??o das propriedades f?sico-qu?micas, a ze?lita ZSM-5 ausente de direcionador org?nico torna-se promissora para aplica??o em processos de refino ou utiliza??o como suporte catal?tico, visto que, sua s?ntese reduz os impactos ambientais e custos de produ??o

Stickoxide (NOx) und Distickstoffoxid (N2O) entstehen bei der Verbrennung fossiler Brennstoffe in Gegenwart von Luft und gehören auf Grund ihrer toxischen bzw. klimaschädigenden Wirkung zu den Luftschadstoffen. In der Arbeit wird die simultane Reduktion von NOx und N2O an nickelbeladenen Zeolithen vom Typ H-ZSM-5 mit Propen als Reduktionsmittel untersucht. Die experimentellen Arbeiten wurden unter realitätsnahen Bedingungen mit einem Katalysatorbett durchgeführt. Der Einfluss des Nickelgehalts und der Acidität des zeolithischen Trägermaterials auf Umsatz und Selektivität der Reduktion werden diskutiert. Ausgehend von den gewonnenen Ergebnissen wird ein wahrscheinlicher Reduktionsmechanismus vorgeschlagen. / Nitric and nitrous oxides (NOx, N2O) are part of toxic and climate damaging airborne pollutants and will be produced by combustion of fossil fuels in present of air. In this work the simultaneous reduction of NOx and N2O with propene has been investigated using nickel impregnated zeolites of type H-ZSM-5 as catalytic active material. The experiments have been done using one catalyst bed and a synthetic gas mixture according to real existing environment conditions. The influence of nickel content as well as acidity of the support material on conversion and selectivity have been discussed. Using the experimental results a possible reaction mechanism has been submitted.

Les matériaux « coeur-coquille » composés d’une nanoparticule métallique encapsulée à l'intérieur de coquilles inorganiques (oxydes, carbone …) attirent de plus en plus l'attention par leurs propriétés particulières, en particulier dans le domaine de la catalyse. Les particules métalliques sont protégées par la coquille, qui empêche entre autres le frittage et la croissance des particules à haute température. Cependant, les coquilles sont généralement méso à macroporeuses et elles ne peuvent pas jouer le rôle de tamis moléculaire pour les molécules de taille nanométrique. En revanche, les zéolithes sont des solides cristallins microporeux dont les pores bien définis permettent une forte discrimination des réactifs basée sur la taille, la forme ou leur coefficient de diffusion. L’objectif de cette thèse visait à la synthèse de catalyseurs de type coeur-coquille dans lesquels la coquille est une zéolite microporeuse de structure MFI (silicalite-1 et ZSM-5), le coeur étant soit une particule de métal noble (Au, Ag, Pt, Pd), soit des alliages de ces différents métaux, soit enfin un métal de transition (Co, Ni, Cu). Ces catalyseurs ont été appliqués dans des réactions d'hydrogénation sélective (aromatiques substitués) et l'oxydation sélective de CO en présence d'hydrocarbures. Nous avons ainsi montré que la coquille zéolithique, tout en protégeant les particules du frittage, modifie la sélectivité des réactions en interdisant aux réactifs volumineux d’atteindre les sites catalytiques / Nanostructured yolk-shell materials, which consist of metal nanoparticle cores encapsulated inside hollow shells, attract more and more attention in material science and catalyst applications during the last two decades. Metal particles are usually highly mono-dispersed in size and isolated from each other by the shell, which prevents growth by sintering at high temperature. Because they are generally made of meso/macroporous oxides or amorphous carbon, shells cannot carry out molecular sieve-type separation of molecules at the nanometric scale. The aim of the present thesis was to synthesize yolk-shell catalyst with microporous zeolite shells (silicalite-1 and ZSM-5), containing noble (Au, Pt, Pd) transition (Co, Ni, Cu) and alloy metal nanoparticles. Zeolites are crystalline microporous solids with well-defined pores capable of discriminating nanometric reactants on the basis of size, shape and diffusion rate. Zeolite-based yolk-shell catalysts have been applied in selective hydrogenation (toluene and mesitylene) and oxidation (CO) reactions in the presence of hydrocarbons. Zeolite shells not only plaid a key role as membranes, thus changing selectivities as compared to conventional supported catalysts, but they also protected metal nanoparticles from sintering under reaction conditions

Stickoxide (NOx) und Distickstoffoxid (N2O) entstehen bei der Verbrennung fossiler Brennstoffe in Gegenwart von Luft und gehören auf Grund ihrer toxischen bzw. klimaschädigenden Wirkung zu den Luftschadstoffen. In der Arbeit wird die simultane Reduktion von NOx und N2O an nickelbeladenen Zeolithen vom Typ H-ZSM-5 mit Propen als Reduktionsmittel untersucht. Die experimentellen Arbeiten wurden unter realitätsnahen Bedingungen mit einem Katalysatorbett durchgeführt. Der Einfluss des Nickelgehalts und der Acidität des zeolithischen Trägermaterials auf Umsatz und Selektivität der Reduktion werden diskutiert. Ausgehend von den gewonnenen Ergebnissen wird ein wahrscheinlicher Reduktionsmechanismus vorgeschlagen. / Nitric and nitrous oxides (NOx, N2O) are part of toxic and climate damaging airborne pollutants and will be produced by combustion of fossil fuels in present of air. In this work the simultaneous reduction of NOx and N2O with propene has been investigated using nickel impregnated zeolites of type H-ZSM-5 as catalytic active material. The experiments have been done using one catalyst bed and a synthetic gas mixture according to real existing environment conditions. The influence of nickel content as well as acidity of the support material on conversion and selectivity have been discussed. Using the experimental results a possible reaction mechanism has been submitted.