1 |
[en] EVALUATION OF AGING OF STRUCTURAL REPAIR PERFORMED WITH COMPOSITE MATERIAL / [pt] AVALIAÇÃO DO ENVELHECIMENTO DE REPAROS ESTRUTURAIS CONSTITUÍDOS DE MATERIAIS COMPOSTOSLUANA DE BRITO COSTA 28 February 2011 (has links)
[pt] O presente trabalho analisa o impacto do envelhecimento dos materiais
compostos (fibra de vidro e resina epóxi) utilizados como elemento estrutural de
reforço em dutos (reparo). O estudo envolveu etapas de revisão bibliográfica, desenvolvimento de métodos experimentais de envelhecimento, execução de testes e análise estatística dos resultados. Um procedimento envolvendo testes com amostras que sofreram envelhecimento acelerado foi desenvolvido objetivando encontrar possíveis parâmetros indicativos de envelhecimento estrutural (módulo de elasticidade E, deformação máxima delta e limite de resistência a tração Su) para materiais compostos de fibra de vidro e resina epóxi. Os testes envolveram amostras submetidas a ambientes com radiação UV, de temperatura de 70°C e água a temperatura de 70°C. Para desenvolvimento do estudo, foram utilizados 10 espécimes de tubos de aço com 75 mm de diâmetro e 2 mm de espessura de parede, onde em 9 deles foram usinados rebaixos na superfície externa para simular defeitos longitudinais, representando perdas de espessura por corrosão. Em seguida, os espécimes com defeito foram reparados com 8 camadas de material composto. Foram confeccionados ainda 49 corpos de prova retangulares, a partir de placas de 25cmx25cm, para a realização de ensaios de tração e flexão. Depois de envelhecidos, os espécimes foram submetidos a ensaios de tração (ASTM – 3039), flexão (ASTM D790) e ruptura dos tubos submetidos à pressão interna, objetivando investigar variações dos parâmetros estruturais E, delta e Su, para verificar a possível ocorrência de degradação. Assim, através de observações visuais e da variação das propriedades, pode-se perceber que em nenhum dos resultados, foi possível comprovar de fato o envelhecimento do material. Alguns resultados apresentaram variações no E e Su, porém estas não foram significativas e/ou conclusivas para garantir o comprometimento do uso de tal material. / [en] The findings of a research program on the impact of aging of composite
materials used as structural elements for pipe repairs are presented in this paper.
The research involved literature review, planning and development of
experimental methods for accelerated aging, testing of specimens, and statistical
analysis of test results. An accelerated aging process was designed and
developed in order to determine the effects of aging on the mechanical properties
of glass reinforced epoxy composites subject to environments with UV radiation
or air and water temperatures of 70 degrees Celsius. Ten samples of three-inch
diameter thin walled pipes were used for testing. Nine of the samples had
longitudinal defects machined on their external surface in order to simulate metal
loss or thinning caused by localized corrosion. The sample pipes were
subsequently repaired with eight layers of composite material. To complement
the study, 49 samples with rectangular cross-sections were aged and tested by
traction and bending. After the simulated aging process was completed, the
specimen samples were subjected to tensile tests (ASTM - 3039), bending, or
internal pressure until ruptured in order to assess their possible degradation
levels. ISO 24817 standards were used to help with test result analysis.
Considering visual observation and measured variation of mechanical
properties, it was concluded that aging of the material could not be ascertained
from any of the results. Although, some of the results showed variation on the
Young Modulus (E) and Rupture Strength (Su), the results were neither
significant nor conclusive in order to guarantee that structural deterioration of the
material or of the specimens had occurred at non acceptable levels.
|
2 |
[en] TREATMENT OF EFFLUENTS CONTAINING FREE CYANIDE THROUGH THE SYSTEM H2O2/UV / [pt] TRATAMENTO DE EFLUENTES CONTENDO CIANETO LIVRE ATRAVÉS DO SISTEMA H2O2/UVADRIANA CINOPOLI GONCALVES 10 March 2005 (has links)
[pt] O presente trabalho teve como objetivo estudar o tratamento
de efluentes contendo cianeto livre através do sistema
H2O2/UV e selecionar as condições operacionais mais
adequadas para uma maior eficiência do processo. Para isso,
foram empregadas soluções sintéticas de KCN com
características de pH e concentração similares às condições
de um efluente industrial real. O fotorreator utilizado nos
testes de oxidação foi um reator cilíndrico de seção
anular, equipado com uma lâmpada de baixa pressão de 28 W
concêntrica com emissão em 254 nm, onde a solução ficava
diretamente em contato com a mesma. Este fotorreator foi
acoplado a um sistema de refrigeração que mantinha a
temperatura de operação em 25oC.As variáveis avaliadas
foram concentração inicial de cianeto em solução, pH
inicial da solução, potência de UV irradiada e razão molar
[H2O2]/[CN-]. Para soluções contendo uma concentração
inicial de cianeto igual a 100 ppm, foi possível atingir
uma eficiência remoção de 99,9 por cento em 25 minutos, em pH igual
a 9,5, com uma razão molar [H2O2]:[CN-] igual a 3. Para
efluentes contendo uma concentração inicial de cianeto
igual a 300 ppm, nas mesmas condições operacionais,
alcançou-se a mesma eficiência em 30 minutos. / [en] The present work had the objective of studying the
treatment of effluents containing free cyanide through the
system H2O2/UV, and of selecting the best operational
conditions for best efficiency of the process. For that, it
was employed synthetic solutions of KCN with
characteristics of pH and concentration similar to those of
a real effluent. The photoreactor employed in the oxidation
tests was a cylindrical reactor of annular section,
equipped with a concentrical low pressure lamp of 28 W with
emission in 254 nm, where the solution was in direct
contact with the lamp. This photoreactor was coupled with a
cooling system which kept the operation temperature at
25oC. The evaluated variables were initial cyanide
concentration in solution, initial pH of the solution,
power of radiated UV and molar ratio [H2O2]/[CN-]. For
solutions containing an initial concentration of cyanide
equal to 100 ppm, it was possible to reach a removal
efficiency of 99.9 per cent in 25 minutes, in pH equal to 9.5, with
a molar ratio of [H2O2]:[CN-] equal to 3. For effluents
containing an initial concentration of cyanide equal to 300
ppm, at the same operational conditions, it was possible to
achieve the same removal efficiency in 30 minutes.
|
Page generated in 0.0442 seconds