This thesis is focused on objective analysis of data obtained during quality of service measurements provided by the company O2 Czech Republic Inc. Purpose of this study is mapping of existing methods, resources and ways of measurement. The result of practical part is design of new methodology of measurement for the department RAN Management, which is responsible for measurement of quality of services.

The aim of this thesis is to choose the proper measurement system for evaluating the performance of the LTE mobile networks based on long-term measurements. The thesis describes mobile network LTE, its architecture and introducts the Quality of Service in the LTE. In the next part are studied the known measurement methods and furthermore, there is proposed a solution in the form of long-term measurement. This measurement uses the mobile phone application Open-RMBT, which stores the measurement results into the database on the chosen server. The following part focuses on the issue of choosing a suitable mobile device for the measurement, then it describes a pilot testing and the followed run of the long-term measurements. In the last part is introduced the interractive application to plot graphs. Measurement results are discussed in the conclusion.

Aim of thesis was to acquaint with architecture and process of signal in systems using broadband LTE wireless technology. Thesis in detail is described physical layer of system. Next there is described comparison of LTE and WiMAX and table with all present systems. Thesis also is contained information about tested LTE system in real traffic. Next aim was created simulation of LTE system in downlink and uplink. Interface was created for easier configuration of each characteristics of transfer and type of interference of useful signal. This interface is contained control of whole simulation and presentation of measured values. Measured data were processed into graphs, which show dependence of error rate BER on C/N of useful and interference signal.

This paper provides theoretical analysis of LTE network and Femto cells. Its presents their modulation and transition techniques, their performance and of course implementation of Femto cells into LTE macro-layer. It also describes potential risk of interference between LTE macro-layer and Femto cells and provides the way how to solve and simulate interference. Finally it states simulation and analysis of model situations.

In this diploma thesis the differences between single pulse and double pulse laser induced breakdown spectroscopy (LIBS) methods are discussed. The time evolution of laser induced plasma (LIP) parameters, such electron density, plasma temperature, density of ions and atoms is shown. Selected methods for evaluation of plasma parameters (Boltzmann equation, Saha-Boltzmann equation etc.) are also stated. The theoretical bases of local thermodynamic equilibrium (LTE), which is necessary condition for using of previously stated methods for computation of plasma parameters, are discussed. Diploma thesis also contains the description of each component of our LIBS experimental set up and the way of their optimization. Presented theoretical advantages of DP LIBS method are demonstrated on results of experimental measurements of steel standards.

This thesis describes protocols used in IP Multimedia Subsystem (IMS) networks. Freely available implementations of IMS system are described. The main goal is to describe design and implementation of a tool for analyzing communication between users and IMS system. The tool seeks and decodes signaling messages. These messages are analyzed for information about sessions which are necessary for session monitoring and accounting. Final gathered information are exported in a form of extended NetFlow/IPFIX records. We used open-source Open IMS Core implementation for building IMS network and creating test data. As endpoints we used another open-source application for Android OS called IMSDroid.

Predmetom diplomovej práce je skúmanie možností realizácie univerzálneho meracieho zariadenia v sieti LTE. Sú popísané základy M2M komunikácie a trendy v IoT. Cieľom práce je nájsť optimálny hardvérový základ, na ktorom následne bude možné konfigurovať LTE modem a získať údaje o stave a kvalite pripojenia k sieti. Následne bude vykonaná séria testov za účelom zmerania parametrov siete a výsledky budú spracované k prezentácii na webovom serveri vo forme grafov.

This thesis deals with the quality of service (QoS) mechanism in Evolved Packet System (EPS). The basic architecture and characteristics of the EPS are introduced. The concept of QoS is defined. Furthermore, QoS related entities, their functions and corresponding procedures are described. The methodology for measuring and evaluating of end-to-end QoS as seen from a user’s point of view is designed. This methodology is used to measure QoS of experimental cellular network at UTKO FEEC BUT. Finally, configuration change for optimizing the QoS support of experimental cellular network is designed.

This thesis deals with the investigation and assessment of communication standards LTE-Advance and WiFi (IEEE 802.11n/ac). The EVM error parameter is examined for each standard. To work with different standards a universal workplace have been proposed (testbed). This universal workplace serves for adjusting transmitting and receiving means and for processing signals transmitted and interpreted. Matlab was chosen for this work, through which only control devices such as generators and analyzers from Rohde & Schwarz. This workplace also measures the coexistence of these standards. At the conclusion of this thesis, different coexistence scenarios were designed and evaluated through testbed results.

Mobile networks are in the process of becoming the world’s leading medium for data traffic. This challenge has raised the bar for Quality of Services (QoS) provided by the mobile network operators. It requires methods and tools to verify the Service Level Agreement (SLA) and benchmark competitors by comparing metrics of QoS, e.g. the round-trip time and available bandwidth. For this purpose, Blixt™ has been developed, which is a property of InfoVista Sweden AB. Blixt™ is an Android application which measures the available bandwidth and the round-trip time for the latest generation of mobile networks. Blixt™ approach relies on a time-stamping protocol commonly known as Two-Way Active Measurement Protocol (TWAMP). This research work discusses how the packet probing parameters affect the accuracy of measurements and the level of intrusiveness. The performance of the technique was experimentally tested and compared to other tools and methods, namely, iPerf3, nPerf and FTP test.