The thesis deals with a new hotel construction in Brno. The paper aims to elaborate a project documentation for the construction of the building. It is a detached building in a slightly sloping terrain. The building has three floors and one underground floor. On the underground floor there are jointly-shared garages and technical background of the hotel. On the first floor there is a reception, a restaurant, a café and an open-air terrace. The second and the third floor is designed to accommodate guests in double rooms and suites. There is also a manager´s office and a conference room. The bearing construction consists of a ferroconcrete skeleton with a bricked outside envelope of aerated concrete blocks Ytong. The skeletal construction is built on a monolithic foundation footings. The building is covered in a flat single-coat roof which is partly designed as a vegetation roof. The facade of the building is glazed in the northern part of the 1st floor and some parts of the facade are coloured green, the others are of various colours. The building is insulated with a contact insulation system.

This diploma thesis deals with the processing of project documentation for construction of a health centre in Šlapanice. The proposed building is situated on parcels no. 1906/1, 1906/11 and 1906/13. The parcels are part of the cadastral city Šlapanice. The terrain is flat. There are all necessary underground utilities nearby. The object is functionally divided into two parts and has a rectangular plan. The first part consists of a medical centre with a capacity of 19 specialized surgeries. The second part consists of a pharmacy for the general public. The building is designed of the brick construction system with a monolithic reinforced concrete columns and a reinforced concrete continuous slab. The largest footprint building is 66.75 x 18.75 meters. The cladding is designed in aluminium and glass facades with a total thickness of 250 mm. Roofing of the building's entire surface of a flat roof with a waterproofing layer at a gradient of 3% with multiple height levels. The structure of flat roofs is designed as a flat roof with a stabilizing layer of washed river gravel or vegetation roof. Foundation of a building is a combination of foundation footings and foundation passports. The pharmacy part is designed as a single-storey building and the health centre is designed as a partial basement building with three floors.

The aim of my thesis was to perform construction and technological preparation of the construction of commercial house in Brno in the street Křídlovická. The introduction contains the expected design and construction process of the proposed building as a whole. It is also prepared a preliminary draft of the financial cost of the entire project designed according THU and object schedule. Furthermore, the implementation of the project construction site for a major part of the commercial house. Gradually work focuses mainly on the implementation of the technological stage of construction site with detailed processing procedure for the implementation of monolithic concrete structures of the building.

The thesis is elaborated on the basis of project of the retirement home Brno – Tuřany. The thesis is focused on building technology solutions of construction of the retirement home Brno – Tuřany. The main part of the thesis deals with realization of rough construction DCI, especially with detailed description and draft solution for making the ceilings and elliptical reinforced concrete staircase (tube). Apart from the impressive architectonic draft solution of main staircase of the building, it will be interesting to deal with progress of the whole construction that is divided into three dilatational parts.

In this diploma thesis „Static solution of hospital completion in Pisek“ I study statical solution of one new building of hospital. Statical solution includes the design and dimensioning of reinforced concrete floor structures and peripheral beams. The floor structure consists of point supported reinforced concrete slab. The floor slab is supported by columns and walls. The aim of the project is to desing and evaluate the ultimate limit state of reinforced concrete slab and beams. Also was created 3D computational model to analysis the construction, model was created in software Scia Engineer. To verify the resulting values of internal forces was used to the method of replacement frames. The thesis includes an analysis of internal forces in the structure, while based on different types of soil. Individual values are compared. Finally was made drawings of solved part of the building.

This diploma thesis deals with the processing of project documentation of student housing in the city of Olomouc. The building is located near the university dormitory accommodation of Palacky University. It is designed to complement the missing type of accommodation. Building is a L-shaped five-storey, without a basement and with a flat roof. Structural system is mostly brick, only part of first floor is solved by columns. The building is divided into three building complexes. Two wings for the accommodation have 4 floors. The connector block has five floors, where the 5th floor is only the engine room. Foundation structures are concrete strips and foundation pads. South side of the building is protected from the sun by sunscreens, on which in a future could be installed photovoltaics. The building is divided into three parts in terms of functionality. 1.NP consists of commercial premises in the southern block and private rooms for accommodated in the eastern block. 2nd-4th floor forms spaces designed to accommodate students. Accommodation capacity is 105 people.

This diploma thesis focuses on the design of roof slab in two options. Internal forces are calculated by software rfem. The thesis also includes design of column, manual calculation and comparision with finite element method and drawings.

Subject of this diploma thesis is construction technology project of the apartment building Triangolo in town Nitra. Diploma thesis includes technical report, time and financial plan of the building, technical report equipment of the building site with drawing, design of construction machines, technological regulation for vertical and horizontal monolith construction, inspection and test plan, schedule of OSH, financial analysis of formwork.

The diploma thesis solves a theater with a cafe in the town of Humpolec in the Vysočina Region. It contains complete documentation for execution, assessment in terms of fire safety and in terms of building physics. Furthermore, the proposal ventilation for cinema, foyer and cafe. There is a cinema and a cafe, which is located on the second floor. Cinema is designed with a capacity of 196 seats, of which 5 seats are reserved for people with limited mobility. Screening is provided as 2D mode and 3D projection. The café is designed for moviegoers and the general public. The café seats 36 seats. The building is designed as a two storey with dissected floor plan with rounded shapes with no sharp edges with a protruding portion of the roof of cinema, which is located on the north side of the building and has the function division of the building into individual units. The building has dimensions of 39.15 meters x 29.45 meters. The supporting structure of the building consists of reinforced concrete reinforced walls and ceilings. In the southern part of the building with rooms Foyer café is designed glass facade of the LOP. Supporting roof structure over the cinema hall is made up of wooden trusses joined punched punched plates.

The content of this master's thesis is architectural and technological project of new built administration building Přelouč city. This project contains technological instruction how to build supporting structures from reinforced concrete, suggestion of used machinery,time schedule, quality plan, detailed costing, building management, design of work site and plan of work safety.