Spelling suggestions: "subject:"železobetonový?a"" "subject:"železobetonová?a""
61 |
Bytový dům Hlaváčkova – stavebně technologický projekt / Residential building Hlavackova - construction technology projectHerben, Tomáš January 2017 (has links)
The subject of this thesis is the construction and technological project of a residential building Hlavackova. The work is mainly focused on the stage of construction. The work includes technical report building equipment, wider transport relations, design of mechanical assemblies, technological prescription monolithic structures and related inspection and test plans, safety, environmental protection, work contract, draft securing material resources for rough substructure and special use of roads, financing construction costs and schedule of construction.
|
62 |
Nosná konstrukce horského hotelu / Load-bearing structure of mountain hotelKudličková, Jitka January 2017 (has links)
Master’s thesis is based on analysis and design of a load bearing structure of an mountains hotel. Mountain hotel schould be realized in the village Vernirovice in Šumperk district. The proposed structure is formed 4th floors. In 1.NP is a restaurant, a sports and wellness center. In 2.NP in the right side is situated the swimming pool. In 2 to 4 floor are located rooms. This structure is supported with a strip footing made of reinforced concrete. The main load-bearing elements in the vertical direction are in 1.NP reinforced concrete walls and columns, the upper floors bearing masonry walls of ceramic blocks THERM. The inner support walls are 300 mm thick, outside support walls are 400 mm thick. Floors are constructed of carrying plates with girders above the larger openings. These plates and girders are made of reinforced concrete. In the 2 floor are beams with the span of 8,8 m. These girders are designed of prestressed concrete cause the large loads. Individual levels are connected with monolithic concrete staircases. Around the middle of the building is a monolithic reinforced concrete elevator shaft. The highest elevation above grade level is 16 m. The thesis also deals with relevant drawing documentations for chosen parts of construction.The building is located in the ski area VI and IV wind areas.
|
63 |
Dům s pečovatelskou službou ve Zlíně / Nursing home, ZlínKaulincová, Hana January 2022 (has links)
The subject of the thesis is the development of project documentation for the construction of a nursing home in Zlín for clients who are unable to take care of themselves and need full day care. The nursing home is designed to stand alone in sloping terrain. The slope is used and the entrance to the first above-ground level is at the level of the modified terrain from Broučkova street and the entrance to the basement is also from the modified terrain. The building is designed with one underground floor and five upper floors. The circumferential and internal supporting masonry is designed from ceramic cut cinder blocks on the upper floors. Lost shuttering is used on the perimeter and vertical support structures, in the basement. Elevator shafts, ceiling structures and staircases are designed from monolithic reinforced concrete structures. The roof is an extensive green roof. The object is based on reinforced concrete strips. The object is insulated with the ETICS.
|
64 |
Horský hotel / Mountain hotelMoučka, Miroslav January 2022 (has links)
The aim of this master’s project is to develop project documentation of a new-built mountain hotel in Ostružná. This hotel is near the ski area Ramzová in Jeseníky. Foundation of my building is from ground reinforced concrete slab. My building is supported by clay block load-bearing walls and clay non-load bearing walls. Exterior building envelope is designed as an aluminum shingle ventilated facade. The slabs are from reinforced concrete. The roofs of this designed building are two, first is pitched roof with insulation over rafters and second is intensive green warm flat roof. This project contains HVAC concept, photovoltaic panel concept, heating concept in technical equipment of building part. The third part of my master’s project is energy assessment for the building.
|
65 |
Obvodní oddělení policie ČR v Brně - Bohunicích, příprava realizace stavby / District Police Department of the Czech Republic in Brno-Bohunice, Preparation for ConstructionDubecký, Tomáš January 2022 (has links)
The aim of the diploma thesis is to prepare the construction called the District Police Department of the Czech Republic in Brno, Bohunice. The diploma thesis contains a technical report on the construction technology project, which deals with architectural and construction design solutions, coordination situation and transport routes, where critical points are assessed time and financial plan of construction, where all construction objects are described with their time and financial schedule, a study of the implementation of the main construction stages, which addresses the various stages of construction. The diploma thesis contains a technical report, item budget, plan for the establishment and liquidation of buildings and drawings of construction site equipment for each stage, design of the main construction machinery for the construction. A detailed time plan of the main building, a plan of its supply of materials for the rough construction was prepared for the given construction. Furthermore, the work contains a technological regulation for a reinforced concrete monolithic staircase, which is related to the control and test plan for a reinforced concrete monolithic staircase. The next assignment deals with the item budget of the main building for the rough construction, the drawing of the formwork for the reinforced concrete monolithic staircase and the economic assessment and evaluation of construction cranes.
|
66 |
Skladovací hala č. 2 v Rousínově - stavebně technologický projekt / Storage hall No. 2 in Rousínov - construction-technological projectGottvaldová, Denisa Unknown Date (has links)
The subject of my diploma thesis is a construction-technological solution for realization of a storage hall in Rousínov. The work deals with a time and financial plan for all buildings of the project Storage Hall, Rousínov. A technical report, a study of the implementation of the construction’s individual stages, a design and assessment of transport routes, a design of the construction site equipment and a design of the machinery were prepared for the building No. 2. An itemized budget with a statement of acreage and construction schedule was prepared. A technological regulation and a control and test plan were prepared for the implementation process of the wire-reinforced concrete industrial floor. Within the diploma thesis, a technological regulation for the implementation of a reinforced concrete retaining wall was prepared. Noise pollution caused by the construction site was examined and evaluated in a noise study. The environmental requirements for the storage hall building No. 2 were processed.
|
67 |
Bytový komplex Kadetka, příprava realizace stavby / Apartment Complex Kadetka, Preparation for Building RealisationPáleník, Tomáš Unknown Date (has links)
The subject of the diploma thesis is to elaborate a selected part of the construction technology project for Apartment complex Kadetka - preparation for building realisation. Specifically, this is an underground garage and object C. In the course of the creation of project, the objects A and B, incorporated in the project of the construction site equipment, were also taken into account. The content of the work is a technical report to the construction technology project, evaluation of transport routes, time and financial plan, individual realization phases of the main building phase, design of the main building machine and mechanisms, time schedule for rough construction, plan for securing material resources, elaboration of technology regulations for underground monolithic reinforced concrete structures and check and test plan. The thesis also includes an item budget for the apartment house made with Build Power S software.
|
68 |
Autosalon se servisem / Car showroom with servicePavlíček, Jiří Unknown Date (has links)
The subject of this master thesis is the elaboration of project documentation for the construction of a car showroom & service. This building is located in Brno, cadastral area of city Brno: Královo Pole. It is a detached building without a basement built on a trapezoid shaped area with a flat terrain. Object is divided into two functional parts: the car showroom and the car service. These two parts are constructionally and operationally connected. The car showroom is designed as a two-storey object, which serves as car exhibition, technical and hygienic facilities and mainly the administrative parts of both objects. The car service is designed as a single-storey object without a basement, which serves as a workspace of the car service and a warehouse. The load-bearing structural system of the car showroom is made of reinforced concrete pillars with ceramic masonry. The load-bearing structural system of the car service is made of reinforced concrete pillars with light sandwich panels. The foundation slab consists of prefabricated stepped foundation pad, prefabricated reinforced concrete grade beam and concrete strip footing. Insulation system of the building is made of insulation boards from basalt wool cladding by ventilated facades with perforated steel panels. Insolation in the car showroom is secured by glass curtain wall in combination with plastic windows and doors. Ceiling structures are designed as prestressed ceiling panels Spiroll. Roofing structure of both objects is supported by prestressed reinforced concrete roof girder in combination with trapezoidal sheet and insulation boards from basalt wool and PIR boards. The roof of the objects is flat with ordinary layer order with waterproof layer from softened PVC.
|
69 |
Příprava realizace administrativních objektů Palmovka Park / Preparation for the implementation of administrative buildings Palmovka ParkBoucník, Jan January 2018 (has links)
The diploma thesis deals with the preparation of the construction of Palmovka Open Park III administrative building. It contains a technological regulation for drilled piles, technological regulation for reinforced concrete monolithic constructions, broader transport routes, study of the implementation of the main technological stages, design of building machines and mechanisms, control and testing plan for drilling piles and reinforced concrete constructions, risk and measures, time and financial plan, calculation according to THU, drawing of site equipment, cycle, timetable, item budget, selected technological details.
|
70 |
Polyfunkční dům / Mixed-use buildingHort, Martin January 2020 (has links)
Diploma thesis describes the design and processing of project documentation of the multifunctional building. The multifunctional building is located in the central part of the town Náměšť nad Oslavou. The building has 4 floors. It is partly cellared building with flat roof and walkable terraces. This building is consisted of 2 functional parts, the first part is designed for living and the second one is designed for contact with the customer. There are shops and offices. The first floor is wheelchair accessible. In the basement there is a technical background of the building and cellars for housing units. In this multifunctional building we can find 13 residential units and five offices. All of the floors are connected with staircase and lift. The Carpark and the private garden with playground are also part of this residential area. This building is based on concrete blocks. Load-bearing, peripheral walls and connecting walls are made of ceramic blocks. A monolitic ceiling construction is the combination of the iron and the concrete. Two types of insulation are used in peripheral walls. The first one is called ETICS, external thermal insulation composite system, made of polystyrene. The second type of insulation is facade cladding system where the main insulation layer is made of mineral wool. The insulation layer is replaced by XPS polystyrene where facade is in contact with the ground. Facade cladding panels are made of cement and wood fibers called Cembrit.
|
Page generated in 0.0316 seconds