In this diploma thesis is processed build-up organization of logistics centre in Ostrava. The build-up organization covers the implementation of ground works, foundation constructions and precast concrete framework. Storage hall of logistics centre is based on drilled concrete piles and precast concrete framework makes up main structure. Construction technology project contains time-schedule and financial plan for whole project, time-schedule of construction works, budget, technological standard for precast concrete framework, design of building site accessories, design of machine group, safety plan, check and test plan.

The objective of this thesis is to draw up the design documentation for the construction of a hotel. The hotel is situated on the edge of the golf resort Kaskáda near to Jinačovice. It’s a brick building with two above – ground floors and one underground. There is the staircase in the building that creates protected escape route. The perimeter wall is designed of ceramic bricks Porotherm T Profi. They are filled – in by mineral wool. The hotel is divided into three dilatational parts. There are 35 guest rooms in the hotel; two of them are barrier – free, in total 63 beds. In the ground floor there are entrance, reception, restaurant, bar, kitchen with the background. In the basement there are technical equipment, a fitness room, a wellness, changing rooms, washrooms and a bar. The roof of the hotel is flat. There is the terrace accessible from the apartments in the second floor above the restaurant.

The subject of graduation thesis is a building-technological study of production and warehousing hall and headquarters of Ergon protected workshops in Třinec. The work is prepared on the basis of the project documentation. This consists of 8 building objects( 2 main building objects and 6 engineering objects). Building object SO 01-assembly and warehousing hall will be used for installation of assembly lines for simple mounting of imported parts and for semi automatic painting line equipment. Building object SO 02- headquarters building will be used for social activities of employees (WC. showers, social room , cloak rooms) and office premises. The main aims of graduation thesis are : project of construction site equipment including of time and economical evaluation, time schedule and financial plan for objects, study of main phases of project realisation for objects SO 01 and SO 02, project of main building machines including their radius( reach), time schedule of building object SO 02, technological prescript for steel construction preparation of object SO 01 with control and check plan.

The subject of this thesis is the construction and technological project for distribution warehouses in Prague. Textual part contains a technical report on construction technology project, wider relations of traffic routes with marked critical points, the study of the main technological stages of the building, principles of organization of construction, design of the main building machines and mechanisms, technological regulations, inspection and test plans, health and safety on the site. In the section with attachments there is a map of the locality, drawings of site facilities, including road signs, charts of the movement of machines, the schedule of the main building structure, the budget of the main building structure, a plan for securing material resources, time and financial plan, an economic evaluation of site facilities, details and other technical documentation stages.

This master´s project deals with design of an office building nearly zero energy standard. My master´s project consists of three parts. In the first one I work on technical design of the office building. It is a three-storey building with partial basement. Vertical load-bearing system is partially made from monolithic concrete walls and partially from clay blocks walls. The horizontal load-bearing structures are made of monolithic concrete slab. All roofs are designed as flat roofs. In second part I design all technical equipment in this building. In the last part I compare three types of roof, photovoltaic power plants and evaluate their environmental impact. First type of PV power plant is made by monocrystalline solar cell, second one by polycrystalline solar cell and last one by monocrystalline solar cell with battery system. Environmental impact of these systems is evaluated in Open LCA software. All structures comply with the valid standards and regulations.

The subject of the diploma thesis is construction-technological solution for realization of the production hall with administrative part in Sudoměřice. Parts of the thesis are the technical report for the construction-technological project, a study of the realization of the main technological stages of the building, the solution of the wider transport route links, where I designed and assessed selected transport routes. The other parts of the diploma thesis are design of a site equipment with the technical report of the site equipment, design of the main building machines and mechanisms. The time and financial plans of objects are elaborated, followed by the detail time schedule of the realization of the main building obejct with a workers needs diagram and the item budget of the main building object with the bill of quantities. For the proces of the realization of the reiforced concrete prefabricated construction, the technological regulation for the assembly of elements with usability of the mobile crane, was made. In the diploma thesis, the technological regulation for the reiforced concrete cast-in-place columns and bond beams, was also prepared. Due to the high demands on the quality of the construction, the control and test plans for the assembly of the reiforced concrete prefabricated elements and for the cast-in-place columns and bond beams, were also prepared. Within the environmental protection, the requirements for the certification LEED 2009 Core & Shell, were processed.

Diploma thesis deals with construction-technological project of prefabricated steel hall. I put emphasis on technological process of foundation structures. The time schedule of all processes, the cost estimation budget, the inspection and testing plan and the machine set designing are also contained. The building site equipment for excavation and rough superstructure and the coordination plan drawing with transportation roads is designed.

This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.

Master’s thesis deals with complete project documentation of newly built object of library and mediatheque located on the site in České Budějovice. It is a three-storey building divided into three parts, one-storey, two-storey and three-storey. It is partly basement. The underground part is devoted to main storage spaces of library services, management offices and social facilities for staff (toilets, changing rooms, washrooms). This part of the building has own entrance for employees. In the 1st floor is located the main library area along with exhibition spaces and the main entrance for visitors with self service cloakroom. In the 2nd floor are designed library spaces for visually impaired persons with fund of audio books, CDs and DVDs, a lecture hall with a projector and own kitchen and space for reading magazines and periodicals. From this floor is possible access to the outdoor terrace, which has own terrace furniture store nearby. In the 3rd floor is located a literary café with its own facilities. In each floor are also designed sanitary facilities for use by persons with limited ability of movement and orientation. All floors are connected by stairs and passenger lifts. In terms of construction, the building is designed as a frame, in the underground parts made of reinforced concrete, the overhead of glued laminated timber elements. The ceiling structure designed over the underground floor is monolithic reinforced concrete slab. The ceilings in the upper part are designed as a wooden beamed made of the glued laminated timber elements. The building has a pent roof created by wooden trusses assembled with punched metal plate fasteners. The foundations are designed as belts and footings. The study, detailed documentation, thermal-technical evaluation of selected structures and fire safety of the building are processed. For processing of the thesis were used software AutoCAD 2010, Teplo 2011, Area 2011, Ztráty 2011 and Fire NX 802 PRO.

The thesis is focused of proposal and procesing of project documentation Center for waterskiing. The proposed object is located in the western part of the town Soběslav, in the locality aimed at sports activities. The building is created of facilities for summer sports, especially water skiing and wakeboarding. Further there will be built a playground for ball sports and track on roller skates. This is a three-storey no with a cellar object with a flat roof. The object is based on the foundation reinforced concrete pads a strips. The first floor is bricked of permanent formwork and partly of cast in place structure. The second and third floors is designed of clay blocks POROTHERM. This masonry is insulated with the aid of external contact thermal insulation. In the western part of the building is designed ventilated facade. The floor structures is designed from prestressed reinforced concrete panel SPIROLL and partly from reinforced concrete slabs. The object is divided into several operating units. They are the gym and its facilities, restaurant with kitchen, facilities for employees and the necessary storerooms, coffeehouse, shop with sporting equipment, rental equipment for water skiing and a dressing room serving the outdoor sports. The essential part of the second floor is comprised outdoor terrace. From this terrace is allowed entry to the coffeehouse, restaurants, shops and on the main staircase.