No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

The overall objective of this research is to advance the programmable motion control of pneumatic drives. Enhanced performance characteristics and improved parameter tuning facilities have been evolved for a new generation of pneumatic servos. The evolution has been achieved with specific reference to the application of pneumatics in the motion control of modular robots and other modular machines. The research has been largely experimentally-based with complementary new modelling studies providing a basis for suggesting and explaining the control strategies evolved. Novel realtime control algorithms have been implemented and their associated performance characteristics statistically analysed. The algorithms have provided technological advance with respect to (i) minimising drift and hysteresis in the drive system through compensating and automating the system null conditions; (ii) optimising the positioning time through use of learning procedure; (iii) achieving velocity control through "null velocity" compensation and learning.

This research study is concerned with the derivation of advanced robot programming methods. The methods include the use of proprietary simulation modelling and design software tools for the off-line programming of industrial robots. The study has involved the generation of integration software to facilitate the co-operative operation of these software tools. The three major researcli'themes7of "ease of usage", calibration and the integration of product design data have been followed to advance robot programming. The "ease of usage" is concerned with enhancements in the man-machine interface for robo t simulation systems in terms of computer assisted solid modelling and computer assisted task generation. Robot simulation models represent an idealised situation, and any off-line robot programs generated from'them may contain'discrepancies which could seriously effect thq programs' performance; Calibration techniques have therefore been investigated as 'a method of overcoming discrepancies between the simulation model and the real world. At the present time, most computer aided design systems operate as isolated islands of computer technology, whereas their product databases should be used to support decision making processes and ultimately facilitate the generation of machine programs. Thus the integration of product design data has been studied as an important step towards truly computer integrated manufacturing. The functionality of the three areas of study have been generalised and form the basis for recommended enhancements to future robot programming systems.

This research describes the steps towards the development of a low-cost wheelchair-mounted manipulator for use by the physically disabled and elderly. A detailed review of world rehabilitation robotics research has been conducted, covering fifty-six projects. This identified the main areas of research, their scope and results. From this review, a critical investigation of past and present wheelchair-mounted robotic arm projects was undertaken. This led to the formulation of the key design parameters in a final design specification. The results of a questionnaire survey of fifty electric wheelchair users is presented, which has for the first time established the needs and abilities of this disability group. An analysis of muscle type actuators, which mimic human muscle, is presented and their application to robotics, orthotics and prosthetics is given. A new type of rotary pneumatic muscle actuator, the flexator, is introduced and through extensive testing its performance characteristics elucidated. A review of direct-drive rotary pneumatic, hydraulic and electrical actuators has highlighted their relative performance characteristics and has rated their efficiency in terms of their peak torque to motor mass ratio, Tp/MM. From this, the flexator actuator has been shown to have a higher Tp/MM ratio than most conventional actuators. A novel kinematic arrangement is presented which combines the best features of the SCARA and vertically articulated industrial robot geometries, to form the 'Scariculated' arm design. The most appropriate actuator for each joint of this hybrid manipulator was selected, based on the criteria of high Tp/MM ratio, low cost, safety and compatibility. The final design incorporates conventional pneumatic linear double-acting cylinders, a vane type rotary actuator, two dual flexator actuators, and stepping motors for the fme control of the wrist/end effector. An ACSL simulation program has been developed which uses mass flow rate equations, based on one-dimensional compressible flow theory and suppressed critical pressure ratios, to simulate the dual flexator actuator. Theoretical and empirical data is compared and shows a high degree of correlation between results. Finally, the design and development work on two prototypes is discussed. The latest prototype consists of a five-axis manipulator whose pneumatic joints are driven by pulse width modulated solenoid valves. An 8051 microprocessor with proportional error feedback modilles the mark to space ratio of the PWM signal in proportion to the angular error of the joints. This enables control over individual joint speeds, reprogrammable memory locations and position monitoring of each joint. The integration of rehabilitation robotic manipulators into the daily lives of the physically disabled and elderly will significantly influence the role of personal rehabilitation in the next century.

No description available.