In the global economy, innovation is one of the most important competitive assets for companies willing to compete in international markets. As competition moves from standardised products to customised ones, depending on each specific market needs, economies of scale are not anymore the only winning strategy. Innovation requires firms to establish processes to acquire and absorb new knowledge, leading to the recent theory of Open Innovation. Knowledge sharing and acquisition happens when firms are embedded in networks with other firms, university, institutions and many other economic actors. Several typologies of innovation and firm networks have been identified, with various geographical spans. One of the first being modelled was the Industrial Cluster (or in Italian Distretto Industriale) which was for long considered the benchmark for innovation and economic development. Other kind of networks have been modelled since the late 1970s; Regional Innovation Systems represent one of the latest and more diffuse model of innovation networks, specifically introduced to combine local networks and the global economy. This model was qualitatively exploited since its introduction, but, together with National Innovation Systems, is among the most inspiring for policy makers and is often cited by them, not always properly. The aim of this research is to setup an econometric model describing Regional Innovation Systems, becoming one the first attempts to test and enhance this theory with a quantitative approach. A dataset of 104 secondary and primary data from European regions was built in order to run a multiple linear regression, testing if Regional Innovation Systems are really correlated to regional innovation and regional innovation in cooperation with foreign partners. Furthermore, an exploratory multiple linear regression was performed to verify which variables, among those describing a Regional Innovation Systems, are the most significant for innovating, alone or with foreign partners. Furthermore, the effectiveness of present innovation policies has been tested based on the findings of the econometric model. The developed model confirmed the role of Regional Innovation Systems for creating innovation even in cooperation with international partners: this represents one of the firsts quantitative confirmation of a theory previously based on qualitative models only. Furthermore the results of this model confirmed a minor influence of National Innovation Systems: comparing the analysis of existing innovation policies, both at regional and national level, to our findings, emerged the need for potential a pivotal change in the direction currently followed by policy makers. Last, while confirming the role of the presence a learning environment in a region and the catalyst role of regional administration, this research offers a potential new perspective for the whole private sector in creating a Regional Innovation System.

The programme of research examines knowledge workers, their relationships with organisations, and perceptions of management practices through the development of a theoretical model and knowledge worker archetypes. Knowledge worker and non-knowledge worker archetypes were established through an analysis of the extant literature. After an exploratory study of knowledge workers in a small software development company the archetypes were refined to include occupational classification data and the findings from Study 1. The Knowledge Worker Characteristics Model (KWCM) was developed as a theoretical framework in order to analyse differences between the two archetypes within the IT sector. The KWCM comprises of the variables within the job characteristics model, creativity, goal orientation, identification and commitment. In Study 2, a global web based survey was conducted. There were insufficient non-knowledge worker responses and therefore a cluster analysis was conducted to interrogate the archetypes further. This demonstrated, unexpectedly, that that there were marked differences within the knowledge worker archetypes suggesting the need to granulate the archetype further. The theoretical framework and the archetypes were revised (as programmers and web developers) and the research study was refocused to examine occupational differences within knowledge work. Findings from Study 2 identified that there were significant differences between the archetypes in relation to the KWCM. 19 semi-structured interviews were conducted in Study 3 in order to deepen the analysis using qualitative data and to examine perceptions of people management practices. The findings from both studies demonstrate that there were significant differences between the two groups but also that job challenge, problem solving, intrinsic reward and team identification were of importance to both groups of knowledge workers. This thesis presents an examination of knowledge workers’ perceptions of work, organisations and people management practices in the granulation and differentiation of occupational archetypes.

This research explores how news media reports construct representations of a business crisis through language. In an innovative approach to dealing with the vast pool of potentially relevant texts, media texts concerning the BP Deepwater Horizon oil spill are gathered from three different time points: immediately after the explosion in 2010, one year later in 2011 and again in 2012. The three sets of 'BP texts' are investigated using discourse analysis and semi-quantitative methods within a semiotic framework that gives an account of language at the semiotic levels of sign, code, mythical meaning and ideology. The research finds in the texts three discourses of representation concerning the crisis that show a movement from the ostensibly representational to the symbolic and conventional: a discourse of 'objective factuality', a discourse of 'positioning' and a discourse of 'redeployment'. This progression can be shown to have useful parallels with Peirce's sign classes of Icon, Index and Symbol, with their implied movement from a clear motivation by the Object (in this case the disaster events), to an arbitrary, socially-agreed connection. However, the naturalisation of signs, whereby ideologies are encoded in ways of speaking and writing that present them as 'taken for granted' is at its most complete when it is least discernible. The findings suggest that media coverage is likely to move on from symbolic representation to a new kind of iconicity, through a fourth discourse of 'naturalisation'. Here the representation turns back towards ostensible factuality or iconicity, to become the 'naturalised icon'. This work adds to the study of media representation a heuristic for understanding how the meaning-making of a news story progresses. It offers a detailed account of what the stages of this progression 'look like' linguistically, and suggests scope for future research into both language characteristics of phases and different news-reported phenomena.

Adopting a grounded theory methodology, the study describes how an event and pressure impact upon a process of deinstitutionalization and institutional change. Three case studies were theoretically sampled in relation to each other. They yielded mainly qualitative data from methods that included interviews, observations, participant observations, and document reviews. Each case consisted of a boundaried cluster of small enterprises that were not industry specific and were geographically dispersed. Overall findings describe how an event, i.e. a stimulus, causes disruption, which in turn may cause pressure. Pressure is then translated as a tension within the institutional environment, which is characterized by opposing forces that encourage institutional breakdown and institutional maintenance. Several contributions are made: Deinstitutionalization as a process is inextricable from the formation of institutions – both are needed to make sense of institutional change on a conceptual level but are also inseparable experientially in the field; stimuli are conceptually different to pressures; the historical basis of a stimulus may impact on whether pressure and institutional change occurs; pressure exists in a more dynamic capacity rather than only as a catalyst; institutional breakdown is a non-linear irregular process; ethical and survival pressures as new types were identified; institutional current, as an underpinning mechanism, influences how the tension between institutional breakdown and maintenance plays out.

The global economic crisis that hit the western countries strongly has emphasised the need to abandon the economic-performance significance of leadership and return to a meaning-making significance. While a lot of research has been done in the field of leadership and management disciplines, little has been done on how to develop leadership. This study evaluated the degree in which leadership training in the market-place today was effective at developing authentic leadership and, therefore, at changing individual behaviour. Since none of the leadership theories address how behavioural change is actually achieved, theories of change were integrated in the current study. A conceptual model combining Authentic Leadership Development (ALD) theory and the Theory of Planned Behaviour (TPB) was proposed. Furthermore, this study explored the relationship between a positive contemplation of change and the actual change observed in individuals after the leadership intervention. In order to test this conceptualisation, a longitudinal quasi-experimental study was conducted. Leaders were surveyed in this study one month before and one month after the programme. Three complementary questionnaires were distributed to participants in one of four leadership development programmes (two corporate initiatives and two business-school programmes). Analyses showed that leaders who attended a leadership intervention (as compared to a control group) developed higher levels of authentic leadership, as rated by them-selves and others in their working environment and controlling for baseline scores. The results also indicated that intentions were developed through the interventions and that the development of such intentions translated into changes in authentic behaviour. Intentions mediated the relationship between attitude and authentic leader-ship. In addition, when contemplation of change was high and attitudes towards authentic leadership were positive, the development of intentions was stronger. The implications of these findings for the theory and practice of leadership development programmes and the impact on organisational performance are discussed.

This research aims to examine the effectiveness of Soft Systems Methodology (SSM) to enable systemic change within local goverment and local NHS environments and to examine the role of the facilitator within this process. Checkland's Mode 2 variant of Soft Systems Methodology was applied on an experimental basis in two environments, Herefordshire Health Authority and Sand well Health Authority. The Herefordshire application used SSM in the design of an Integrated Care Pathway for stroke patients. In Sandwell, SSM was deployed to assist in the design of an Infonnation Management and Technology (IM&T) Strategy for the boundary-spanning Sandwell Partnership. Both of these environments were experiencing significant organisational change as the experiments unfurled. The explicit objectives of the research were: To examine the evolution and development of SSM and to contribute to its further development. To apply the Soft Systems Methodology to change processes within the NHS. To evaluate the potential role of SSM in this wider process of change. To assess the role of the researcher as a facilitator within this process. To develop a critical framework through which the impact of SSM on change might be understood and assessed. In developing these objectives, it became apparent that there was a gap in knowledge relating to SSM. This gap concerns the evaluation of the role of the approach in the change process. The case studies highlighted issues in stakeholder selection and management; the communicative assumptions in SSM; the ambiguous role of the facilitator; and the impact of highly politicised problem environments on the effectiveness of the methodology in the process of change. An augmented variant on SSM that integrates an appropriate (social constructivist) evaluation method is outlined, together with a series of hypotheses about the operationalisation of this proposed method.

One of the current research trends in Enterprise Resource Planning (ERP) involves examining the critical factors for its successful implementation. However, such research is limited to system implementation, not focusing on the flexibility of ERP to respond to changes in business. Therefore, this study explores a combination system, made up of an ERP and informality, intended to provide organisations with efficient and flexible performance simultaneously. In addition, this research analyses the benefits and challenges of using the system. The research was based on socio-technical system (STS) theory which contains two dimensions: 1) a technical dimension which evaluates the performance of the system; and 2) a social dimension which examines the impact of the system on an organisation. A mixed method approach has been followed in this research. The qualitative part aims to understand the constraints of using a single ERP system, and to define a new system corresponding to these problems. To achieve this goal, four Chinese companies operating in different industries were studied, all of which faced challenges in using an ERP system due to complexity and uncertainty in their business environments. The quantitative part contains a discrete-event simulation study that is intended to examine the impact of operational performance when a company implements the hybrid system in a real-life situation. Moreover, this research conducts a further qualitative case study, the better to understand the influence of the system in an organisation. The empirical aspect of the study reveals that an ERP with pre-determined business activities cannot react promptly to unanticipated changes in a business. Incorporating informality into an ERP can react to different situations by using different procedures that are based on the practical knowledge of frontline employees. Furthermore, the simulation study shows that the combination system can achieve a balance between efficiency and flexibility. Unlike existing research, which emphasises a continuous improvement in the IT functions of an enterprise system, this research contributes to providing a definition of a new system in theory, which has mixed performance and contains both the formal practices embedded in an ERP and informal activities based on human knowledge. It supports both cost-efficiency in executing business transactions and flexibility in coping with business uncertainty. This research also indicates risks of using the system, such as using an ERP with limited functions; a high cost for performing informally; and a low system acceptance, owing to a shift in organisational culture. With respect to practical contribution, this research suggests that companies can choose the most suitable enterprise system approach in accordance with their operational strategies. The combination system can be implemented in a company that needs to operate a medium amount of volume and variety. By contrast, the traditional ERP system is better suited in a company that operates a high-level volume market, while an informal system is more suitable for a firm with a requirement for a high level of variety.

Increased awareness of the crucial role of leadership as a competitive advantage for organisations (McCall, 1998; Petrick, Scherer, Brodzinski, Quinn, & Ainina, 1999) has led to billions spent on leadership development programmes and training (Avolio & Hannah, 2008). However, research reports confusing and contradictory evidence regarding return on investment and developmental outcomes, and a lot of variance has been observed across studies (Avolio, Reichard, Hannah, Walumbwa, & Chan, 2009). The purpose of this thesis is to understand the mechanisms underlying this variability in leadership development. Of the many factors at play in the process, such as programme design and delivery, organisational support, and perceptions of relevance (Mabey, 2002; Day, Harrison, & Halpin, 2009), individual differences and characteristics stand out. One way in which individuals differ is in their Developmental Readiness (DR), a concept recently introduced in the literature that may well explain this variance and which has been proposed to accelerate development (Avolio & Hannah, 2008, 2009). Building on previous work, DR is introduced and conceptualised somewhat differently. In this study, DR is construed of self-awareness, self-regulation, and self-motivation, proposed by Day (2000) to be the backbones of leadership development. DR is suggested to moderate the developmental process. Furthermore, personality dispositions and individual values are proposed to be precursors of DR. The empirical research conducted uses a pre-test post-test quasi-experimental design. Before conducting the study, though, both a measure of Developmental Readiness and a competency profiling measure are tested in two pilot studies. Results do not find evidence of a direct effect of leadership development programmes on development, but do support an interactive effect between DR and leadership development programmes. Personality dispositions Agreeableness, Conscientiousness, and Openness to Experience and value orientations Conservation, Open, and Closed Orientation are found to significantly predict DR. Finally, the theoretical and practical implications of findings are discussed.

With the growth of the multi-national corporation (MNCs) has come the need to understand how parent companies transfer knowledge to, and manage the operations of, their subsidiaries. This is of particular interest to manufacturing companies transferring their operations overseas. Japanese companies in particular have been pioneering in the development of techniques such as Kaizen, and elements of the Toyota Production System (TPS) such as Kanban, which can be useful tools for transferring the ethos of Japanese manufacturing and maintaining quality and control in overseas subsidiaries. Much has been written about the process of transferring Japanese manufacturing techniques but much less is understood about how the subsidiaries themselves – which are required to make use of such techniques – actually acquire and incorporate them into their operations. This research therefore takes the perspective of the subsidiary in examining how knowledge of manufacturing techniques is transferred from the parent company within its surrounding (subsidiary). There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate this knowledge into their working practices. A particularly relevant theme is how subsidiaries both replicate and adapt knowledge from parents and the circumstances in which replication or adaptation occurs. However, it is shown that there is a lack of research which takes an in-depth look at these processes from the perspective of the participants themselves. This is particularly important as much knowledge literature argues that knowledge is best viewed as enacted and learned in practice – and therefore transferred in person – rather than by the transfer of abstract and de-contextualised information. What is needed, therefore, is further research which makes an in-depth examination of what happens at the subsidiary level for this transfer process to occur. There is clearly a need to take a practice-based view to understanding how the local managers and operatives incorporate knowledge about manufacturing techniques into their working practices. In depth qualitative research was, therefore, conducted in the subsidiary of a Japanese multinational, Gambatte Corporation, involving three main manufacturing initiatives (or philosophies), namely 'TPS‘, 'TPM‘ and 'TS‘. The case data were derived from 52 in-depth interviews with project members, moderate-participant observations, and documentations and presented and analysed in episodes format. This study contributes to our understanding of knowledge transfer in relation to the approaches and circumstances of adaptation and replication of knowledge within the subsidiary, how the whole process is developed, and also how 'innovation‘ takes place. This study further understood that the process of knowledge transfer could be explained as a process of Reciprocal Provider-Learner Exchange that can be linked to the Experiential Learning Theory.

This dissertation examines internationalisation of small and medium sized enterprises. There has been a journey to achieve this. The research has started as an action research as Teaching Company Scheme Associate. This has been done in two research cycles, which investigated factors for successful internationalisation of a small and medium sized UK manufacturing enterprise. This has revealed that successful internationalisation requires good technology and knowledge transfer to the new operations. The action research is followed by a survey that has been conducted within UK manufacturing companies. The data collected was analysed under three models: entry mode selection, role of factory and level of internationalisation. The first two models explain two major aspects of internationalisation decision. The last is showing what makes successful internationalising small and medium sized companies. These models provided several important results. The small and medium sized enterprise internationalisation is harder to achieve because most of these organisations do not have experience in technology and knowledge transfer. The success of internationalisation depends on the success of the transfer. This is achieved through employee ownership of the new knowledge. There are many factors affecting this result such as the network relationships such as trust, control and commitment and cognitive distance between two organisations. The last is a product of the difference between prior knowledge and the required level of knowledge. The entry mode and role of factory are decided through these factors while the level of internationalisation can only be explained by absorptive capacity of the recipient organisation and the technology transfer ability of the host organisation.