No description available.

No description available.

No description available.

No description available.

Eight functionally identified group Ia muscle afferents from triceps surae or plantaris muscles were labeled intraaxonally with horseradish peroxidase (HRP) in seven adult cats. Subsequently, HRP was injected into two to six homonymous or heteronymous α-motoneurons per animal (total = 22), each identified by motor unit type and located near the site of afferent injection. The complete trajectories of labeled afferents were reconstructed, and putative synaptic contacts on HRP-labeled motoneurons were identified at high magnification. Dendritic paths from each contact were also mapped and measured. A total of 24 contact systems (the combination of a group Ia afferent and a postsynaptic motoneuron) were reconstructed, of which 17 were homonymous, and seven were heteronymous. Overall, homonymous contact systems had an average of 9.6 boutons, whereas heteronymous contact systems had an average of 5.9 boutons. The average number of boutons found on type S motoneurons in homonymous contact systems was smaller (6.4, range 3-17) than in systems involving types FF or FR motoneurons (FF: 10.4, range 4-18; FR: 11.3, range 4-32). Neither of these differences were statistically significant. In contrast to earlier reports, a majority (15/24) of contact systems included more than one collateral from the same Ia afferent. The complexity (number of branch points) in the arborization pathway leading to each contact (overall mean 8.4 ± 3.3) was virtually identical in all contact systems, irrespective of the type of the postsynaptic motoneuron. The three- dimensional distribution of group Ia contacts was not coextensive with the radially organized dendrites of motoneurons: Dendrites oriented in the ventromedial to dorsolateral axis had the fewest (8%) contacts, whereas rostrocaudal dendrites had the most (63%) contacts. Nevertheless, contacts were widely distributed on the motoneuron surface, with few on and near the soma (≤200 μm radial distance from the soma) or on the most distal parts of the tree (≤1,000 μm). The boutons in individual contact systems also showed wide spatial and estimated electrotonic distributions; only 3/24 systems had all contact located within a restricted spatial/electrotonic region. The relations between these anatomical results and existing electrophysiological data on group Ia synaptic potentials are discussed.

Indiana University-Purdue University Indianapolis (IUPUI) / The purpose of this study is to further investigate the effect of using six different light source types with different light output intensities on the parameters of a mathematical model that predicts the DOC in VLDC’s. In this equation: D = Dp In(E0/Ec), D is the depth of cure in millimeters, E is the curing energy in J/cm2, Ec is the critical curing energy for the composite to reach a gel layer, and Dp is a characteristic coefficient. Three LED and three halogen dental curing units with different light output intensities were used to cure three shades (B1, A3, D3) of a hybrid resin composite. The exposure duration was at the intervals of 10, 20, 30, and 40 seconds for each sample setting. ISO scraping technique was performed to measure the depth of cure of each sample. Regression analysis was used to assess the fit of the proposed mathematical model D = Dp In(E0/Ec) to the experimental data obtained in this study. 72 For all the shade-light combinations; A3, B1, and D3 had significantly different regression lines (P < 0.05) with significantly higher Dp and Ec for B1 than A3 and D3. The only exceptions were for the Ec values between B1 and D3 in Allegro, Astralis 5, and Visilux 2 groups; and the Ec between A3 and B1 in Allegro group. The Dp and Ec parameters didn’t show significant differences between A3 and D3 shades in all the groups. Also, most of the significant differences for Dp values occurred in the B1 shade-light combinations; however, none of the D3 shade-light combinations showed significant differences for Dp. Several factors play combined influential effects on the kinetics of polymerization and depth of cure in VLDC’s. The shade has a more dominant effect on both parameters Dp and Ec than the curing light type or source output intensity. As we cure lighter shades “B1,” the effect of using different lights with different output intensities on the two parameters Dp and Ec will be greater and more significant than for darker shades “A3 or D3.” The clinical significance drawn from this study is that clinicians should recognize that using curing lights w/ increased output intensities doesn’t absolutely increase the DOC of VLDC’s especially with the darker shades.

The student centre in Stare Brno, high privacy standard of living insight of city

The problem was to study several hydrocarbons when they were subjected to ultraviolet light of 2536 Å in the presence of mercury vapor. It would be expected from the work of Stallings that the rupture of any tertiary hydrogen bond in the molecule would be the predominant effect. However, secondary and primary bond splitting would occur as well as some C-C bond rupturing, but these could be expected to a lesser degree than the first, since the t-hydrogen has the greatest reactivity.

The interaction between coherent waves and material systems with complex optical properties is a complicated, deterministic process. Light that scatters from such media gives rise to random fields with intricate properties. It is common perception that the randomness of these complex fields is undesired and therefore is to be removed, usually through a process of ensemble averaging. However, random fields emerging from light matter interaction contain information about the properties of the medium and a thorough analysis of the scattered light allows solving specific inverse problems. Traditional attempts to solve these kinds of inverse problems tend to rely on statistical average quantities and ignore the deterministic interaction between the optical field and the scattering structure. Thus, because ensemble averaging inherently destroys specific characteristics of random processes, one can only recover limited information about the medium. This dissertation discusses practical means that go beyond ensemble averaging to probe complex media and extract additional information about a random scattering system. The dissertation discusses cases in which media with similar average properties can be differentiated by detailed examination of fluctuations between different realizations of the random process of multiple scattering. As a different approach to this type of inverse problems, the dissertation also includes a description of how higher-order field and polarization correlations can be used to extract features of random media and complex systems from one single realization of the light- iv matter interaction. Examples include (i) determining the level of multiple scattering, (ii) identifying non-stationarities in random fields, and (iii) extracting underlying correlation lengths of random electromagnetic fields that result from basic interferences. The new approaches introduced and the demonstrations described in this dissertation represent practical means to extract important material properties or to discriminate between media with similar characteristics even in situations when experimental constraints limit the number of realizations of the complex light-matter interaction

Saudi Aramco is investigating the potential use of oxidized disulfide oil (ODSO), a refinery waste, as a solvent to replace water in zeolite preparation for the implication in industrial processes such as Fluidized Catalytic Cracking (FCC) aiming to increase propylene production. Utilizing ODSO helps Saudi Aramco reduces its processing costs, creates a value for this solvent and reduces the zeolite synthesis cost. One major concern is the effect ODSO may have on the catalytic performance of the prepared zeolites. This study investigates the catalytic cracking of 1-hexene and 2-methyl-2-butene (2M2B) at various WHSV and temperatures over ZSM-5 catalysts prepared from gels with SiO$_2$/Al$_2$O$_3$ ratios (SAR) of 50 and 25 and various ODSO/water substitutions. Six ODSO-based ZSM-5 catalysts were prepared and characterized in terms of acidity, morphology, and textural properties. The impact of catalyst composition and properties on conversion and selectivity is examined and compared to commercial ZSM-5 catalysts with similar SAR (CBV2314 and CBV5524G). At 477 h$^{-1}$ WHSV, ODSO-based catalysts achieved 80% 1-hexene conversion with 53-60% propylene selectivity, outperforming commercial catalysts (52%). However, 2M2B cracking exhibits slower reaction rates and more oligomerization cracking, resulting in lower conversion (46-61%) and propylene selectivity (22-29%). Notably, MAR- 2-3 (30% ODSO, 50 SAR gel) shows the best performance among the ODSO catalysts in terms of stability and selectivity, with results comparable to the commercial catalysts. We noticed, on the other hand, that ODSO-based catalysts possess larger crystals and higher acid site density compared to the commercial catalysts leading, generally, to a decreased stability. These findings enhance understanding of waste-based zeolites in catalytic cracking processes and guide the development of improved ODSO-based catalysts for petrochemical applications.