Spelling suggestions: "subject:"AE wastereducing"" "subject:"AE atreducing""
1 |
Slag cement mortar add bentonite in the study of anti-corrosionWang, Chong-Wei 08 February 2011 (has links)
In this study, we use the swelling characteristics of bentonite to discussion about the performance of bentonite mortar anti-seepage and the performance of resistance to sulfate. And add the AE water-reducing to improve its workability.
To compare with different rate of bentonite added at different ratio of AE water-reducing in the condition of Standard Test for Flow Table. We planning in different water-cement ratio (0.445,0.485,0.550) to test for its fresh properties and hardened properties, and discussion the effect by AE water-reducing on the marine engineering.
According to this study, adding bentonite will make the flow value dropped, and affecting the workability. Because of the positive ion exchange properties between bentonite and water will make it a high volume exchange rate, it means that absorption is high, so when the mixing time, the bentonite will form clumps, in this study, we add the AE water-reducing to improve.
After we add AE water-reducing, the absorption, compressive strength are increase, but we still had to pay attention to the ratio between bentonite and AE water-reducing, the strength of structure perhaps decrease if added too much bentonite.
This study can get the best positive effect when added ratio of 0.25% of bentonite to replaced cement.
|
2 |
Research for polyethylene fibers Reinforced ConcreteChen, Yan-Shuo 24 May 2012 (has links)
In this study, Dyneema fiber can bear tension and not easy to react with the chemicals characteristics, to explore for the resistance to bending moment and compressive strength of concrete.
To compare with different rate of Dyneema fiber added at different ratio of AE water-reducing in the condition of concrete slump test and slump flow test. We planning in different water-cement ratio 0.48(non AE water-reducing)¡B0.4(add AE water-reducing), to test for its fresh properties and hardened properties, and discussion the effect by AE water-reducing and Dyneema fiber on the marine engineering.
According to this study, adding Dyneema fiber will make the slump and slump flow value dropped, and affecting the workability. Because of Dyneema fiber will tangle when add too much Dyneema fiber in concrete. So in mixing time, the Dyneema fiber and concrete will form clumps, in this study, we add the AE water-reducing to improve.
After we add AE water-reducing, the slump, slump flow, compressive strength, are increase, but we still had to pay attention to the ratio between Dyneema fiber and AE water-reducing, the strength of structure perhaps decrease if added too much Dyneema fiber or AE water-reducing.
This study can get the best positive effect when added 1.5% volume volume of Dyneema fiber.
|
Page generated in 0.29 seconds