This work deal with system design and implement of Trip computer for motorcycle serving as information element of speed and fuel consumption motorcycle. The general aim is design of device with graphic display that shall represent measured values of speed motorcycle, rpm of motor, onboard voltage, charging current, motor temperature and ambient temperature. All measuring data will be saving on memory card. For easily tracking in system menu will be used touch panel on graphic display.

This master thesis deals with the theoretical analysis of wireless sensor networks, a description of selected types of sensors, listing their features and principle of operation for intrusion detection perimeter. Then there is described design and implementation of a wireless sensor node for intrusion detection perimeter usable in wireless sensor networks.

This thesis is focused on design and commissioning of appliance for operating and status display in the aquarium. The first part of the thesis deals with the possibilities of solving particular problems of the system and defines the requirements which the system has to fulfil. The next section of the thesis describes design of hardware part of the system and its software.

This thesis describes the design, development and realization of a wireless electronic timer for use in firesport. Specification of the final product is built with regard to versatility, ease of use and low acquisition costs. Commercial products have been compared as inspiration for this work. Requirements of the timer are based on the rules of firesport disciplines, where the timer can be used. It consists of a base station that can be accompanied for additional elements used to starting, splits capturing and stopping. An independent communication module has been created to ensure wireless connection. Libraries for comfort work with the module, support for USB bus and reliable protocol for wireless transmission have been implemented.

This Master‘s thesis is dedicated to the design and modernization of the control of production line for the small-lot production of various plastic products. As a control unit will be used 8-bit microcontroller ATmega128. This thesis also deals with design of the needful electronics to control the production line by using appropriate elements and necessary software solution.

Orientador: Nobuo Oki / Resumo: A utilização de redes de comunicação sem fio deixou de ser uma ferramenta opcional para tornar-se uma necessidade no monitoramento de residências, automóveis, controles de processos automatizados e comunicação entre as pessoas. Tratando-se de redes de transdutores cabeadas, as redes CAN (Controller Area Network) são utilizadas em automóveis modernos, instrumentação médica, em veículos táticos, na automação de processos, no transporte metropolitano e em sistemas de controle de fábricas. A maioria das estruturas críticas de sistemas de controle fazem uso do CAN em algum ponto na rede, para conectar sensores que se encontram distantes e controlar atuadores de um sistema, ou para conectar vários controladores que utilizam uma interface em comum. O padrão sem fio, IEEE 802.15.4, comercialmente conhecido como “ZigBee”, foi projetado para operar em baixas taxas de dados, com segurança e facilidade de configurações de rede. Esta tese tem como objetivo desenvolver um sistema heterogêneo utilizando microcontroladores ATMEGA em que, o modelo do protocolo CAN e o padrão IEEE 802.15.4 estejam acoplados. Este módulo será capaz de gerenciar e monitorar sensores e atuadores utilizando CAN e, através do padrão sem fio 802.15.4, comunicar-se com os outros módulos da rede. O interfaceamento entre os pacotes da rede de controle de área (CAN) com a rede ZigBee é realizado através da implementação de tabelas de dispersão (Hash Tables) para o gerenciamento e otimização da memória utilizada. As anál... (Resumo completo, clicar acesso eletrônico abaixo) / Doutor

Submitted by MARCOS ANTONIO ESTREMOTE null (estremot@gmail.com) on 2017-11-03T20:18:22Z No. of bitstreams: 1 Tese Estremote.pdf: 11274082 bytes, checksum: d68bb503cd676b58bcfab15d1c39ba5c (MD5) / Approved for entry into archive by LUIZA DE MENEZES ROMANETTO (luizamenezes@reitoria.unesp.br) on 2017-11-13T17:35:07Z (GMT) No. of bitstreams: 1 estremote_ma_dr_ilha.pdf: 11274082 bytes, checksum: d68bb503cd676b58bcfab15d1c39ba5c (MD5) / Made available in DSpace on 2017-11-13T17:35:07Z (GMT). No. of bitstreams: 1 estremote_ma_dr_ilha.pdf: 11274082 bytes, checksum: d68bb503cd676b58bcfab15d1c39ba5c (MD5) Previous issue date: 2017-02-24 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / A utilização de redes de comunicação sem fio deixou de ser uma ferramenta opcional para tornar-se uma necessidade no monitoramento de residências, automóveis, controles de processos automatizados e comunicação entre as pessoas. Tratando-se de redes de transdutores cabeadas, as redes CAN (Controller Area Network) são utilizadas em automóveis modernos, instrumentação médica, em veículos táticos, na automação de processos, no transporte metropolitano e em sistemas de controle de fábricas. A maioria das estruturas críticas de sistemas de controle fazem uso do CAN em algum ponto na rede, para conectar sensores que se encontram distantes e controlar atuadores de um sistema, ou para conectar vários controladores que utilizam uma interface em comum. O padrão sem fio, IEEE 802.15.4, comercialmente conhecido como “ZigBee”, foi projetado para operar em baixas taxas de dados, com segurança e facilidade de configurações de rede. Esta tese tem como objetivo desenvolver um sistema heterogêneo utilizando microcontroladores ATMEGA em que, o modelo do protocolo CAN e o padrão IEEE 802.15.4 estejam acoplados. Este módulo será capaz de gerenciar e monitorar sensores e atuadores utilizando CAN e, através do padrão sem fio 802.15.4, comunicar-se com os outros módulos da rede. O interfaceamento entre os pacotes da rede de controle de área (CAN) com a rede ZigBee é realizado através da implementação de tabelas de dispersão (Hash Tables) para o gerenciamento e otimização da memória utilizada. As análises realizadas de tempo de inserção, remoção e comunicação de dados, com o auxílio da técnica computacional de tabelas de dispersão para o armazenamento das informações, mostram que este procedimento favorece a comunicação entre os protocolos de redes industriais com os protocolos de redes sem fios. A economia de memória do microcontrolador com a utilização das tabelas de dispersão proposta nesta tese chegou a ser em média 750% superior do que as que não se utilizam das tabelas de dispersão. / The use of wireless communication networks is not an optional tool and become a requirement in automated systems, such as monitoring home, automobiles, automated process control and communication between people. In another aspect, wired networks, such as CAN networks, are used in modern automobiles, medical instrumentation, tactical vehicles, process automation, metropolitan transport and manufactory control systems. Many critical structures in control system use CAN network at some point, to connect sensors that are far away and to control system actuators, or to connect several controllers that use a common interface. The wireless IEEE standard 802.15.4, commercially known as “ZigBee”, is designed to operate at low data transfer rates, with security and facility of network configurations. This thesis aims to develop a heterogeneous system using ATMEGA microcontrollers in which the CAN protocol model and the IEEE standard 802.15.4 are coupled. This module is capable of managing and monitoring sensors and actuators using CAN and, through the IEEE standard 802.15.4, communicating with the other modules in network. The interface between the CAN network packets with the ZigBee network is performed through the implementation of Hash Tables to manage and optimize the memory used. The analysis of time of insertion, delete and data communication, with the aid of the computational technique of hash tables for the storage of information, show that this procedure favors the communication between the protocols of industrial networks with protocols of wireless networks . The memory economy of the microcontroller with the the hash tables proposed in this thesis was on average 750% higher than those without the hash tables.

The main topic of this Master's Thesis is design and implementation of mechanical connection between the automatic range switch unit and the AC-DC Transfer Standart Fluke 792A. This Master's Thesis contains theoretical analysis of the the AC-DC Transfer Standart Fluke 792A and of stepper motors. Followed the choosing of appropriate drive. In next chapter is the theoretical analysis of automatic range switch unit, used microcontroller and the description of the GPIB. Last part of this Master's Thesis describes design of mechanical connecting part and the selection of appropriate sensors for sensing the current position of the shading component.

The aim of this work is to design a robotic hand, which will be controlled by wireless Wi-Fi, will be equipped with a camera and for easier operation will be designed control glove. The first part of the thesis is a theoretical analysis, various variants of sensors are described, which can be used for motion detection, each drive units and their control. Next chapters are focused on used electronic modules and microcontrollers. The second part is practical and is focused on the mechanical design of a five-finger robotic hand and fixing to a robotic arm. Also described is the control electronics of the entire robotic hand and the programmed firmware. Next, the design and implementation of the control glove is described. The last chapter describes the programmed application for the Android operating system.

The thesis introduces the design of a test device for preassembled mechatronic cylindrical locks. The device is designed to test the mechanical and electronic parts which ensure minimisation of loss caused by poor preassembling or defect due to electronic parts. Since the defect will only come to realisation upon the complete product testing, the time of complete dismounting, exchange and assembly of the mechatronic parts would be saved and also time required for the final test of the whole product on the device would be saved.