Sudan is endowed with a great diversity of tree species; nevertheless the utilization of wood resources has traditionally concentrated on a few species only. Despite of the richness of Sudan in most of basic factors required to establish forest based industries it still almost entirely dependent on imports to satisfy its needs of the products of such industries. There is an urgent need to assess the suitability of the local fibrous raw materials for industrial utilization, this would not only reduce imports, but they would also provide an economic incentive to the forestry and industrial sectors of Sudan. Sudan has a wide variation of climatic zones, thus; great variations are expected in the anatomical and physical properties between and within species grown in each zone. This variation needs to be fully explored in order to suggest best uses for the species. The present study was carried out to assess the suitability of Acacia seyal var. seyal Del and Balanites aegyptiaca (L.) Delile wood for pulp and paper making (PPM) and flooring industry, as well as to investigate the effect of rainfall zones on selected wood properties. For this purpose, a total of thirty trees per species were collected from four states in Sudan, namely: Blue Nile, North Kordofan, South Kordofan and White Nile. The study areas located in two precipitation zones. Zone one with 273 mm mean annual rainfall, and zone two with 701 mm mean annual rainfall. Wood samples in form of disc were obtained from two heights within each tree, which are 10 % and 90 % from the tree merchantable height. Anatomical, physical and mechanical investigations were conducted in order to test the wood properties of the study species. The studied anatomical properties were: fibre and vessel diameter, lumen diameter and wall thickness. In addition to fibre length and three fibre derived values, namely: flexibility coefficient, Runkel ratio and slenderness ratio. The trend of fiber length from pith to bark was determined. The anatomical composition was described. Wood density was investigated as a main physical property. Basic density as well as air dry density were measured in the current study. Additionally, the density was measured using X-ray densitometry method in order to assess its suitability as a valid tool for the study species density determination. The trend of wood basic density from pith to bark was also determined. Brinell hardness strength was measured in the transverse and radial sections. According to the study results, the fibre length of both species considered as medium (900 -1600 μm). However, Acacia seyal has longer fiber. Acacia seyal wood density considered heavy (≥ 720 kg/m³) while that of Balanites aegyptiaca is medium (500 - < 720 kg/m³). Depending upon the mean values of hardness strength in transverse as well as radial sections, the wood of both species can be classified as very hard (up to 146 N/mm2 hardness strength). Fibre length and wood density for both species followed the increase trend from the pith to the bark. The X-ray densitometry technique is considered as a valid tool for wood density determination for both species. For each species, some wood properties (in mature wood) were significantly affected by the water stress in the drier zone. For instance, Acacia seyal fibre length was negatively affected, while vessel wall thickness, basic density as well as hardness strength of the radial section were positively affected. In case of Balanites aegyptiaca the following properties were affected: vessel dimensions (negatively) and basic density (positively). However, the water stress did not affect Acacia seyal fibre and vessel diameter and lumen diameter, fiber wall thickness, flexibility coefficient, Runkel ratio and hardness strength in transverse section. Balanites aegyptiaca fibre characteristics and hardness strength did not show any response to water stress as well. In general, the overall wood properties of the study species considered compatible for PPM and flooring industry. However, trees growing in the more humid zone are preferable for both industries, due to their lower wood density and longer fibres in case of Acacia seyal and lower density in case of Balanites aegyptiaca.

Sudan is endowed with a great diversity of tree species; nevertheless the utilization of wood resources has traditionally concentrated on a few species only. Despite of the richness of Sudan in most of basic factors required to establish forest based industries it still almost entirely dependent on imports to satisfy its needs of the products of such industries. There is an urgent need to assess the suitability of the local fibrous raw materials for industrial utilization, this would not only reduce imports, but they would also provide an economic incentive to the forestry and industrial sectors of Sudan. Sudan has a wide variation of climatic zones, thus; great variations are expected in the anatomical and physical properties between and within species grown in each zone. This variation needs to be fully explored in order to suggest best uses for the species. The present study was carried out to assess the suitability of Acacia seyal var. seyal Del and Balanites aegyptiaca (L.) Delile wood for pulp and paper making (PPM) and flooring industry, as well as to investigate the effect of rainfall zones on selected wood properties. For this purpose, a total of thirty trees per species were collected from four states in Sudan, namely: Blue Nile, North Kordofan, South Kordofan and White Nile. The study areas located in two precipitation zones. Zone one with 273 mm mean annual rainfall, and zone two with 701 mm mean annual rainfall. Wood samples in form of disc were obtained from two heights within each tree, which are 10 % and 90 % from the tree merchantable height. Anatomical, physical and mechanical investigations were conducted in order to test the wood properties of the study species. The studied anatomical properties were: fibre and vessel diameter, lumen diameter and wall thickness. In addition to fibre length and three fibre derived values, namely: flexibility coefficient, Runkel ratio and slenderness ratio. The trend of fiber length from pith to bark was determined. The anatomical composition was described. Wood density was investigated as a main physical property. Basic density as well as air dry density were measured in the current study. Additionally, the density was measured using X-ray densitometry method in order to assess its suitability as a valid tool for the study species density determination. The trend of wood basic density from pith to bark was also determined. Brinell hardness strength was measured in the transverse and radial sections. According to the study results, the fibre length of both species considered as medium (900 -1600 μm). However, Acacia seyal has longer fiber. Acacia seyal wood density considered heavy (≥ 720 kg/m³) while that of Balanites aegyptiaca is medium (500 - < 720 kg/m³). Depending upon the mean values of hardness strength in transverse as well as radial sections, the wood of both species can be classified as very hard (up to 146 N/mm2 hardness strength). Fibre length and wood density for both species followed the increase trend from the pith to the bark. The X-ray densitometry technique is considered as a valid tool for wood density determination for both species. For each species, some wood properties (in mature wood) were significantly affected by the water stress in the drier zone. For instance, Acacia seyal fibre length was negatively affected, while vessel wall thickness, basic density as well as hardness strength of the radial section were positively affected. In case of Balanites aegyptiaca the following properties were affected: vessel dimensions (negatively) and basic density (positively). However, the water stress did not affect Acacia seyal fibre and vessel diameter and lumen diameter, fiber wall thickness, flexibility coefficient, Runkel ratio and hardness strength in transverse section. Balanites aegyptiaca fibre characteristics and hardness strength did not show any response to water stress as well. In general, the overall wood properties of the study species considered compatible for PPM and flooring industry. However, trees growing in the more humid zone are preferable for both industries, due to their lower wood density and longer fibres in case of Acacia seyal and lower density in case of Balanites aegyptiaca.

The present study was conducted in Umfakarin natural forest reserve, South Kordofan, Sudan. The main objective was to investigate the possibility of managing Acacia seyal Del. variety seyal for the production of gum talha. Three stand densities (strata), namely dense, medium, and slight, were distinguished based on the number of trees per hectare. During the sampling phase, the study adopted the method of identifying the competitors (neighboring trees) from the subject one (trees selected for gum production experiments). From the three stand densities, a total of 482 subject trees, covering variable diameter ranges (d= 9-11.5, 13.5-16, 18-20.5 and above 21 cm) were selected, based on the diameter at 0.25 m height (d0.25). In each stratum, competitor trees were identified within a radius equal to the height of subject tree multiplied by a factor (1.25). The diameter at breast height, height to crown base, height, crown radii, and tree coordinates were measured for each of the subject trees and its competitors. Subject trees were exposed to tapping on first of October, the fifteenth of October, and the first of November, using local tools (Sonki and Makmak). Additionally, untapped trees were used as controlling-variables. The initial gum collection was completed fifteen days after the tapping, while the subsequent (7-9 pickings) were done at an interval of fifteen days. Six stand height functions were tested and the results illustrated that the Michailow stand height function was suitable for predicting the height of Acacia seyal in Umfakarin natural forest. The predictive ability of this height function ranged from 19.3% to 24%. The volume function used in this study was able to predict the volume of standing trees with more than 92 percent accuracy. Competition among trees of Acacia seyal was assessed in terms of competition indices. Eight competition indices were quantified using the CroCom program. The relationship between these indices and tree dimensions (diameter at breast height, height and crown diameter) was tested using logarithmic models. Among these indices, the Hegyi_2 index is considered a suitable index to be applied for estimating the degree of competition in natural stands of A. seyal of dense stratum when using diameter at breast height as a predictor. About 70% of the total variability is explained by this logarithmic model. Gum yielded by each subject tree per season was obtained by summing up the gum samples collected from all pickings. Gum production per unit area was also determined. Regression tree, general linear model (GLM) and logistic regression techniques were used for analyzing the obtained data. The results of the study indicated that the gum yield is independent of stand density. Tapping has influence on gum yield. Trees tapped by sonki on the first of October at medium stand density have the highest gum with an average value of about 56 g/tree/season. Significant difference (p = 0.021) was detected between two groups of dates; the first of October and first of November in medium stand density. The results also revealed that the most important variable influencing gum production was found to be diameter at breast height with 23.95 cm threshold. Between 41-53 percent of subject trees produce gum less than 50 g/season. The results indicated that A. seyal species produces a very low quantity of gum talha (3.6-4.8 kg/ha) and for economic reasons, its tapping is not recommended. The findings of the regression analysis revealed to a model which could be used to estimate the yield of gum talha from A. seyal natural stands in the Umfakarin forest, South Kordofan, Sudan. Conducting experiments on the production of gum talha in permanent plot trials in different climatic regions of the Sudan is highly recommended.

The present study was conducted in Umfakarin natural forest reserve, South Kordofan, Sudan. The main objective was to investigate the possibility of managing Acacia seyal Del. variety seyal for the production of gum talha. Three stand densities (strata), namely dense, medium, and slight, were distinguished based on the number of trees per hectare. During the sampling phase, the study adopted the method of identifying the competitors (neighboring trees) from the subject one (trees selected for gum production experiments). From the three stand densities, a total of 482 subject trees, covering variable diameter ranges (d= 9-11.5, 13.5-16, 18-20.5 and above 21 cm) were selected, based on the diameter at 0.25 m height (d0.25). In each stratum, competitor trees were identified within a radius equal to the height of subject tree multiplied by a factor (1.25). The diameter at breast height, height to crown base, height, crown radii, and tree coordinates were measured for each of the subject trees and its competitors. Subject trees were exposed to tapping on first of October, the fifteenth of October, and the first of November, using local tools (Sonki and Makmak). Additionally, untapped trees were used as controlling-variables. The initial gum collection was completed fifteen days after the tapping, while the subsequent (7-9 pickings) were done at an interval of fifteen days. Six stand height functions were tested and the results illustrated that the Michailow stand height function was suitable for predicting the height of Acacia seyal in Umfakarin natural forest. The predictive ability of this height function ranged from 19.3% to 24%. The volume function used in this study was able to predict the volume of standing trees with more than 92 percent accuracy. Competition among trees of Acacia seyal was assessed in terms of competition indices. Eight competition indices were quantified using the CroCom program. The relationship between these indices and tree dimensions (diameter at breast height, height and crown diameter) was tested using logarithmic models. Among these indices, the Hegyi_2 index is considered a suitable index to be applied for estimating the degree of competition in natural stands of A. seyal of dense stratum when using diameter at breast height as a predictor. About 70% of the total variability is explained by this logarithmic model. Gum yielded by each subject tree per season was obtained by summing up the gum samples collected from all pickings. Gum production per unit area was also determined. Regression tree, general linear model (GLM) and logistic regression techniques were used for analyzing the obtained data. The results of the study indicated that the gum yield is independent of stand density. Tapping has influence on gum yield. Trees tapped by sonki on the first of October at medium stand density have the highest gum with an average value of about 56 g/tree/season. Significant difference (p = 0.021) was detected between two groups of dates; the first of October and first of November in medium stand density. The results also revealed that the most important variable influencing gum production was found to be diameter at breast height with 23.95 cm threshold. Between 41-53 percent of subject trees produce gum less than 50 g/season. The results indicated that A. seyal species produces a very low quantity of gum talha (3.6-4.8 kg/ha) and for economic reasons, its tapping is not recommended. The findings of the regression analysis revealed to a model which could be used to estimate the yield of gum talha from A. seyal natural stands in the Umfakarin forest, South Kordofan, Sudan. Conducting experiments on the production of gum talha in permanent plot trials in different climatic regions of the Sudan is highly recommended.

Acacia senegal and Acacia seyal are important agroforestry cash crops indigenous to several countries of sub-Saharan Africa, including Nigeria. The gum exudate produced by these species is termed gum Arabic which is an approved food additive (E414), primarily used as an emulsifier. In the current study, the molecular structure, composition and biophysical properties of gum samples harvested from mature trees of Acacia senegal at two specific ecolocations in Nigeria (NG1 and NG2), have been investigated together with two previously characterised gum samples harvested from A. senegal and A. seyal originating from Sudan. The monosaccharide sugar composition analyses have shown that the A. seyal gum had a lower rhamnose and glucuronic acid content than the A. senegal gum, but had higher arabinose content. No significant difference was observed between the sugar composition of the A. senegal gums from Sudan and Nigeria. The total protein content of the Nigerian gum samples were significantly higher than recorded for the Sudanese samples. The principal amino acids present in all the gum samples are hydroxyproline, serine, aspartame, threonine and proline which is in agreement with literature values. The hydrodynamic size of the molecules present in the gums was studied using dynamic light scattering and it was found that molecular association occurred in solution over time which was inhibited in the presence of an electrolyte. The comparison of droplet size distribution for emulsions prepared with A. senegal (NG1) and A. seyal gum samples showed that A. senegal sample was a better emulsifier than the A. seyal. Multilayer adsorption of the samples onto polystyrene latex particles was observed, which resulted in an increase in thickness of the adsorbed layer as a consequence of the interaction between the protein and carbohydrate within the molecules adsorbed on the emulsion surface. Preliminary analyses of the gums using transmission electron microscopy showed the presence of varied macromolecules, ranging in size from ~12 - ~60 nm. Immuno-gold negative staining (using JIM8 monoclonal antibody) indicated clear labelling of arabinogalactan-proteins present in the gums harvested from A. senegal, the labelling of the A. seyal sample was inconclusive. In summary, the data presented represents the first detailed comparison of the structure, composition and physicochemical characteristics of Nigerian Acacia gum exudates versus Sudanese samples (main global supplier) which have shown that gum obtained from Nigerian sources is a viable alternative to ensure future supply of this valuable natural resource.

Content: The retanning process is considered as one of the most important processes in leather making, and it plays an important role in the modern leather industry. The fibre structure of hide or skin is not uniform and the retanning agent improves the properties of leather by filling the empty part of wet-blue leather. It could contribute to further stabilization of collagen fibres and give better handle properties to leather such as fullness and elasticity. In a conventional leather retanning process, retanning materials used include both inorganic salt like basic chromium salt, zirconium salt and aluminum salt and organic materials such as vegetable tanning agent, synthetic tanning agent, resin retanning and aldehyde tanning agent. Extract from the barks of Acacia seyal (Talh bark), widely distributed in Sudan, has been evaluated for its utilization in the retanning of the leather and presented in this paper. Barks of talh have been extracted for 1 hour with distilled water (1:10 w/v) at temperature above 80˚C. The talh extract prepared has been used for the retanning of wet blue leathers. The effectiveness of talh extract in retanning of wet blue leathers has been compared with mimosa retanning. The organoleptic properties of the leathers viz. softness, fullness, grain smoothness, grain tightness (break), general appearance, uniformity of dyeing of talh retanned leather have been evaluated in comparison with mimosa retanned leathers. Talh retanning resulted in leathers with good grain tightness. Dyeing characteristics of talh retanned leathers have been found to be better than mimosa retanned leathers. Also physical strength characteristic and shrinkage temperature and economic viability were noted. The effluent arising from this retanning system has been analyzed for its environmental impact. Take-Away: Organoleptic properties physical strength characteristic Shrinkage temperature