Recently, mostly due to global warming concerns and high oil prices, electric vehicles have attracted a great deal of interest as an elegant solution to environmental and energy problems. In addition to the fact that electric vehicles have no tailpipe emissions and are more efficient than internal combustion engine vehicles, they represent more versatile platforms on which to apply advanced motion control techniques, since motor torque and speed can be generated and controlled quickly and precisely. The chassis control systems developed today are distinguished by the way the individual subsystems work in order to provide vehicle stability and control. However, the optimum driving dynamics can only be achieved when the tire forces on all wheels and in all three directions can be influenced and controlled precisely. This level of control requires that the vehicle is equipped with various chassis control systems that are integrated and networked together. Drive-by-wire electric vehicles with in-wheel motors provide the ideal platform for developing the required control system in such a situation. The focus of this thesis is to develop effective control strategies to improve driving dynamics and safety based on the philosophy of individually monitoring and controlling the tire forces on each wheel. A two-passenger electric all-wheel-drive urban vehicle (AUTO21EV) with four direct-drive in-wheel motors and an active steering system is designed and developed in this work. Based on this platform, an advanced fuzzy slip control system, a genetic fuzzy yaw moment controller, an advanced torque vectoring controller, and a genetic fuzzy active steering controller are developed, and the performance and effectiveness of each is evaluated using some standard test maneuvers. Finally, these control systems are integrated with each other by taking advantage of the strengths of each chassis control system and by distributing the required control effort between the in-wheel motors and the active steering system. The performance and effectiveness of the integrated control approach is evaluated and compared to the individual stability control systems, again based on some predefined standard test maneuvers.

Recently, mostly due to global warming concerns and high oil prices, electric vehicles have attracted a great deal of interest as an elegant solution to environmental and energy problems. In addition to the fact that electric vehicles have no tailpipe emissions and are more efficient than internal combustion engine vehicles, they represent more versatile platforms on which to apply advanced motion control techniques, since motor torque and speed can be generated and controlled quickly and precisely. The chassis control systems developed today are distinguished by the way the individual subsystems work in order to provide vehicle stability and control. However, the optimum driving dynamics can only be achieved when the tire forces on all wheels and in all three directions can be influenced and controlled precisely. This level of control requires that the vehicle is equipped with various chassis control systems that are integrated and networked together. Drive-by-wire electric vehicles with in-wheel motors provide the ideal platform for developing the required control system in such a situation. The focus of this thesis is to develop effective control strategies to improve driving dynamics and safety based on the philosophy of individually monitoring and controlling the tire forces on each wheel. A two-passenger electric all-wheel-drive urban vehicle (AUTO21EV) with four direct-drive in-wheel motors and an active steering system is designed and developed in this work. Based on this platform, an advanced fuzzy slip control system, a genetic fuzzy yaw moment controller, an advanced torque vectoring controller, and a genetic fuzzy active steering controller are developed, and the performance and effectiveness of each is evaluated using some standard test maneuvers. Finally, these control systems are integrated with each other by taking advantage of the strengths of each chassis control system and by distributing the required control effort between the in-wheel motors and the active steering system. The performance and effectiveness of the integrated control approach is evaluated and compared to the individual stability control systems, again based on some predefined standard test maneuvers.

<div>Due to recent advances in sensor technology and the exponential increase in computation power of electronic control units (ECUs) along with their increasing affordability, active safety and vehicle automation have become major trends in the commercial vehicle industry. New regulations for increased safety are also a major driver behind the industry's increased interest in that topic. As a result, being a crucial part of vehicle automation, steering systems had to be adapted to enable Active Steering. Consequently, commercial vehicle steering designers introduced the concept of torque and angle overlay using an electric motor in series with the conventional hydraulic steering system. However, despite the fact that these systems are becoming more prevalent in the market, they still suffer from inefficiencies intrinsic to the conventional hydraulic steering system still being used. These inefficiencies are a result of</div><div>flow metering losses due to the use of control valves to regulate the pump flow output, as well as inside the steering gear with the use control valves to build assistance pressure.</div><div><br></div><div><div>In this research project, we investigate the potential use of the proven pump Displacement Control (DC) technology in steering on-highway commercial vehicles. DC pumps have been shown to signicantly improve system efficiency as they allow the removal of control valves typically used to regulate </div><div>ow [1]. Instead, the displacement of the pump can be directly controlled to vary the pump's flow rate and direction,</div><div>and thus eliminating throttling losses. The DC technology has been successfully used in a steer-by-wire conguration for an articulated frame steering vehicle and has been shown to signicantly improve efficiency and productivity, as well as result in a reduction in fuel consumption [2].</div></div><div><br></div><div><div>In this work, we propose a steer-by-wire system, using DC pump technology, for on-highway commercial vehicles, and present the dierent possible congurations in which it can be implemented. Moreover, the benets and drawbacks of the steer-by-wire system are researched and identied. Subsequently, the system is designed and validated in simulation, on laboratory test setup, as well as on a test vehicle to prove its feasibility.</div></div><div><br></div><div><div>Chief among the drawbacks of the steer-by-wire system is potential failures that can lead to the complete loss of the steering function of the vehicle. As a result, different possible fail-safe mechanisms are researched from which the most suitable ones are proposed to allow the steer-by-wire system to fail safely. Moreover, two of the proposed fail-safe mechanism are implemented onto the test vehicle to prove and validate their feasibility.</div></div><div><br></div><div><div>Furthermore, an alternative way of using displacement controlled pumps for active steering is be proposed. For this concept, we investigate the possibility of actively controlling the driver's steering effort by varying the pump displacement while maintaining the mechanical link between the steering wheel and the road wheels. If successful, this method will allow for a more efficient way of providing steering assistance as it does away with the conventional control valves used to build pressure and regulate pump flow, and thus eliminating throttling losses. This method has also the advantage of having an intrinsic fail-safe mechanism with manual steering being always possible should the hydraulic or electric systems fail.</div></div>

In this study, various stability control systems are developed to remove the lateral instability of a conventional articulated steer vehicle (ASV) during the oscillatory yaw motion or “snaking mode”. First, to identify the nature of the instability, some analyses are performed using several simplified models. These investigations are mainly focused on analyzing the effects of forward speed and of two main subsystems of the vehicle, the steering system and tires, on the stability. The basic insights into the stability behavior of the vehicle obtained from the stability analyses of the simplified models are verified by conducting some simulations with a virtual prototype of the vehicle in ADAMS. To determine the most critical operating condition with regard to the lateral stability and to identify the effects of vehicle parameters on the stability, various studies are performed by introducing some modifications to the simplified models. Based on these studies, the disturbed straight-line on-highway motion with constant forward speed is recognized as the most critical driving condition. Also, the examinations show that when the vehicle is traveling with differentials locked, the vehicle is less prone to the instability. The examinations show that when the vehicle is carrying a rear-mounted load having interaction with ground, the instability may happen if the vehicle moves on a relatively good off-road surface. Again, the results gained from the analyses related to the effects of the vehicle parameters and operating conditions on the stability are verified using simulations in ADAMS by making some changes in the virtual prototype for any case. To stabilize the vehicle during its most critical driving condition, some studies are directed to indicate the shortcomings of passive methods. Alternative solutions, including design of different types of stability control systems, are proposed to generate a stabilizing yaw moment. The proposed solutions include an active steering system with a classical controller, an active torque vectoring device with a robust full state feedback controller, and a differential braking system with a robust variable structure controller. The robust controllers are designed by using simplified models, which are also used to evaluate the ability to deal with the uncertainties of the vehicle parameters and its variable operating conditions. These controllers are also incorporated into the virtual prototype, and their capabilities to stabilize the vehicle in different operating conditions and while traveling on different surfaces during the snaking mode are shown.

In this study, various stability control systems are developed to remove the lateral instability of a conventional articulated steer vehicle (ASV) during the oscillatory yaw motion or “snaking mode”. First, to identify the nature of the instability, some analyses are performed using several simplified models. These investigations are mainly focused on analyzing the effects of forward speed and of two main subsystems of the vehicle, the steering system and tires, on the stability. The basic insights into the stability behavior of the vehicle obtained from the stability analyses of the simplified models are verified by conducting some simulations with a virtual prototype of the vehicle in ADAMS. To determine the most critical operating condition with regard to the lateral stability and to identify the effects of vehicle parameters on the stability, various studies are performed by introducing some modifications to the simplified models. Based on these studies, the disturbed straight-line on-highway motion with constant forward speed is recognized as the most critical driving condition. Also, the examinations show that when the vehicle is traveling with differentials locked, the vehicle is less prone to the instability. The examinations show that when the vehicle is carrying a rear-mounted load having interaction with ground, the instability may happen if the vehicle moves on a relatively good off-road surface. Again, the results gained from the analyses related to the effects of the vehicle parameters and operating conditions on the stability are verified using simulations in ADAMS by making some changes in the virtual prototype for any case. To stabilize the vehicle during its most critical driving condition, some studies are directed to indicate the shortcomings of passive methods. Alternative solutions, including design of different types of stability control systems, are proposed to generate a stabilizing yaw moment. The proposed solutions include an active steering system with a classical controller, an active torque vectoring device with a robust full state feedback controller, and a differential braking system with a robust variable structure controller. The robust controllers are designed by using simplified models, which are also used to evaluate the ability to deal with the uncertainties of the vehicle parameters and its variable operating conditions. These controllers are also incorporated into the virtual prototype, and their capabilities to stabilize the vehicle in different operating conditions and while traveling on different surfaces during the snaking mode are shown.

A conceptual design of an innovative two-axle lightweight railway vehicle for commuter services is carried out at KTH Railway Group. An active wheelset steering is introduced to improve the curving performance of the vehicle, which is one of the critical performance requirements. This thesis aims to improve the steering performance of the active wheelset steering. Look-up tables for estimating time-varying wheel-rail contact parameters are introduced to supervise a simple PID controller of the active steering system in order to improve steering performance. The look-up table (LUT) estimation is focused on time-varying wheel-rail contact parameters, including creep coefficients and contact patch variables due to their direct influence on curving performance and lateral stability of the wheelset. As a result, the estimated longitudinal unit creep forces (UCF) have the potential to supervise the gains determination of PID controller because it can appropriately distinguish running conditions. The estimation of longitudinal UCF is achieved by the combination of the results from the LUT of creep coefficients and the LUT of contact patch variables. The result from longitudinal unit creep force estimation is shifted to the first quadrant to use as critical gain in the Ziegler-Nichols tuning method for the PID controller. The critical oscillation period for PID tuning can be expressed as a function of vehicle speed. Consequently, the PID controller for the active steering system uses time-varying gains with real-time tuning. The proposed control system for active wheelset steering is validated with nine running conditions using SIMPACK and MATLAB/Simulink co-simulation. The proposed control system provides a stable wheelset lateral displacement control regardless of the running condition. The active steering system significantly reduces wheel-rail wear, which demonstrates the effectiveness of the proposed active steering system. / KTH:s Järnvägsgruppen utvecklar en konceptuell design av ett innovativt, två-axligt, lättvikts järnvägsfordon för tunnelbana eller pendeltåg. En aktiv hjuparsstyrning introduceras för att förbättra kurvtagningsförmågan hos fordonet, vilket är ett av de kritiska prestandakraven hos dessa fordon. Det här examensarbetet har som målsättning att förbättra styrningsprestandan av den aktiva hjulsatsstyrningen. För att uppskatta tidsvarierande hjul-rälskontaktparametrar introduceras pre-definierade tabeller (LUT) som en övervakning av en enkel PID-kontroll för det aktiva styrningssystemet, för att förbättra styrprestandan. Uppskattningen som baseras på tabellen fokuserar på tidsberoende hjul-rälsparametrar, inklusive krypkoefficienter och kontaktytans storlek och form. Dessa variabler är i fokus på grund av deras direkta effekt på kurvtagningsförmågan och den laterala stabiliteten hos hjulparet. Den uppskattade longitudinala enhets krypkraften (UCF) har potential att bestämma förstärkningen hos PID-kontrollen på grund av att den, på ett lämpligt sätt, kan skilja mellan olika körtillstånd. Uppskattningen av longitudinell UCF uppnås genom en kombination av resultat för krypkoefficienter och kontaktytavariabler i LUT. Resultaten från den longitudinella UCF-uppskattningen skiftas till den första kvadranten för att användas som kritisk förstärkning i Ziegler-Nichols justeringsmetod för PID-kontroller. Den kritiska oscillationsperioden för PID-justering kan utryckas som en funktion av fordonets hastighet. Utgående från detta använder PID-kontrollen tidsvarierande förstärkning med realtidsjustering för den aktiva styrningen. Det föreslagna kontrollsystemet valideras mot nio körtillstånd med hjälp av SIMPACK och MATLAB/Simulink-simuleringar. Det föreslagna kontrollsystemet tillhandahåller en stabil lateral förflyttning av hjulparet oberoende av körtillstånd. Det aktiva styrsystemet reducerar hjul-räls slitaget signifikant, vilket demonstrerar effektiviteten hos det framtagna aktiva styrsystemet.

Les antennes à pointage électronique présentent des avantages significatifs dans les systèmes de communication sans fil. Malgré cela elles ne sont toujours pas implantées dans l'industrie automobile. En effet, l'espace limité et le toit en grande partie métallique freinent l’utilisation de ces aériens dans ce contexte contraint. De nombreux défis restent à relever pour concevoir un système efficace, peu encombrant, faible coût et permettant de rayonner sur 360°. L’objectif de cette thèse est donc la mise au point d’une antenne à balayage électronique pour application automobile fonctionnant dans la bande LTE. Un système de «type MIMO » est proposé. Une antenne à résonateur diélectrique efficace, multi-bandes et efficace est conçue selon une procédure de développement spécifique. Un déphaseur accordable est également mis au point et réalisé. Il utilise des commutateurs et un condensateur variable. Un déphasage de 360 degrés est obtenu, le dispositif est commandé électriquement. L’antenne et le déphaseur sont ensuite associés dans un système complet fonctionnant dans la bande LTE. Celui-ci utilise deux antennes identiques, une seule étant alimentée. Ce système complet est mesuré seul et sur le véhicule. Les résultats obtenus sont prometteurs et permettent d’envisager, moyennant quelques améliorations, une exploitation industrielle. Les études menées pour aboutir à ce dispositif sont détaillées dans le manuscrit. / Even though beam steering technology has significant advantages in wireless communication systems, it is still not implemented in the automotive industry. Indeed, the limited space and the large metal sheet on the rooftop are the challenges for such system. This thesis is focused on the design of the LTE beam steering antenna based on a MIMO system for an automotive environment. An appropriate multiband, efficient and compact Dielectric Resonator Antenna is conceived using a specific development procedure. Also, a tunable phase shifter is designed and realized with switches and a variable capacitor. It has 360 degrees phase shift and can be electrically controlled. The proposed DRA and phase shifter are integrated in a global antenna system for automotive application in the LTE band. We finally propose a MIMO system with an active beam steering radiation pattern. It is very compact and can be implemented on the vehicle rooftop. Using the proposed phase shifter, a beam steering antenna is obtained with a global coverage close to 360� for the antenna alone or on the vehicle. Measurements are made in the using context of the antenna. Finally, the developed system is, with some improvement, powerful for powerful enough for "commercial" automotive applications. The studies carried out to develop this antenna are detailed in this manuscript.