Facebook is today the biggest ads platform in the world. This makes it strategi- cally smart for companies to run their ads on the platform. To follow up the result from these ads is an important part for the companies to know if the target audience is the right one. The purpose with this thesis was to investigate if it’s possible for the company Leeroy to develope their own system that follow up ad conversion for Facebook ads. But also investigate how to implement Facebook’s own system and if other systems could be used. From this two purposes a number of goals have been set, which all could be answered. A pilot study resulted in the gathering of information if an own solution could be implemented. The result of this pilot study results in the answer no, an own solution could not be implemented at this state. Through the pilot study a recommended solution could be presented where Facebook’s system is the recommended way to go. This result is based on a system comparison between Facebook and Google Firebase. This recommended solution has resulted in a implementation guide that Leeroy can use to implement Facebook SDK in their application portfolio based on React Native. / Facebook är idag världens största annonsplattform vilket gör det strategiskt smart för företag att annonsera sin produkt eller sina tjänster på plattformen. Att följa upp resultatet av dessa annonser är för företagen en viktig parameter för att veta om den annonserade målgruppen är rätt. Syftet med detta arbete var att undersöka om ett eget system för mobilapplikationer hos företaget Leeroy kan utvecklas för uppföljning av annonskonverteringar hos Facebook-annonser och hur Facebooks egna system implementeras och om andra system går att använda. Utifrån detta syfte kunde ett antal mål fastställas som alla kunde besvaras. Utifrån en förstudie kunde information insamlas om hurvida en egen lösning går att tillämpa. Vilket resulterat i svaret nej, det är idag inte möjligt att utveckla en egen lösning. Genom förstudiens resultat kan en rekommenderad lösning presenteras där Facebooks system rekommenderas utifrån en jämförelse mellan Facebook och Google Firebase. Denna rekommenderade lösning har resulterat i en implementationsguide som Leeroy kan använda för att implementera Facebook SDK i sin applikationsportfölj baserat på React Native.

This master’s thesis deals with design of measurement system for dynamic measurement of bridge sensors. After a short theoretical part, the own concept is introduced. System can provide sampling rate up to 250 kSa/s with 24-bit resolution. The maximum number of samples is about one and a half milion. At first, the design of analog part was made, in this phase of design the digital part is based on evaluation board with ARM Cortex-M7 and external memory. After final choice of appropriate ICs, the analog and digital part will be integrated into one PCB.

The work deals with the measurement of electrical quantities, distribution of data across the Ethernet network into the Internet and intelligent selection of the required values to be transmitted and stored on a central node. The work describes the communication protocols in scale that is necessary for implementation, discussed the requirements for computational resources and microcontroller control is proposed by flowcharts. Attached are source codes in C programming language for microcontroller and PHP scripts for storing and presenting data on Web server.

This thesis deals about a digitizer design. The digitizer is part of air-band monitoring receiver. Requirement is digitalization of two audio signals. The device communicates with PC through USB interface and it provides reading and writing to SD card. The STM32F4DISCOVERY development board with processor STM32F407VGT6 was used for design and function testing. This development kit is supplemented with other peripherals on an extern board (input audio circuits and SD slots). The thesis describes briefly theory for each issue which this project deals with. One part is engaged to the hardware design. Then there is a description of the PC software for the device controlling. The main part of the thesis is about the development of the firmware for MCU, which manages AD conversion, formatting of the voice signal, USB communication (HID and Mass Storage class), recording and reading from the SD card and additional peripherals.

This thesis is concerned with the measurement of physical quantities. Thesis describes sensors in general terms and requirements, which delivers latest trends in the field of automation. The main theme of this thesis is sensors for meassuring pressure, and their connection to the automation chain. In the next part thesis describes the design of the converter for connecting SMART sensors for pressure measuring, that use HART communication protocol, to the automation systems managed by a communication protocol IO-link. First will be described in detail various communication standards by their ISO OSI model, and on this theoretical basis will be based design of converter between communication protocol HART and communication protocol IO-Link. The last part will be Designed software for this converter.