An aqueous droplet in a solution of lipids in oil acquires a lipid monolayer coat, and two such droplets adhere to form a bilayer at their interface. Networks of droplets have been constructed in this way that function as light sensors, batteries and electrical circuits by using membrane proteins incorporated into the bilayers. However, the droplets have been confined to a bulk oil phase, which precludes direct communication with physiological environments. Further, the networks typically have been assembled manually, which limits their scale and complexity. This thesis addresses these limitations, and thereby enables prospective medical and technological applications for droplet networks. In the first part of the work, defined droplet networks are encapsulated within mm-scale drops of oil in water to form structures called multisomes. The encapsulated droplets adhere to one another and to the surface of the oil drop to form interface bilayers that allow them to communicate with each other and with the surrounding aqueous environment through membrane pores. The contents of the droplets can be released by changing the pH or temperature of the surrounding solution. Multisomes have potential applications in synthetic biology and medicine. In the second part of the work, a three-dimensional printing technique is developed that allows the construction of complex networks of tens of thousands of heterologous droplets ~50 µm in diameter. The droplets form a self-supporting material in bulk oil or water analogous to biological tissue. The mechanical properties of the material are calculated to be similar to those of soft tissues. Membrane proteins can be printed in specific droplets, for example to establish a conductive pathway through an otherwise insulating network. Further, the networks can be programmed by osmolarity gradients to fold into designed shapes. Printed droplet networks can serve as platforms for soft devices, and might be interfaced with living tissues for medical applications.

Transparent conducting oxides (TCOs) combine optical transparency in the visible region with a high electrical conductivity. In2O3 doped with Sn (widely, but somewhat misleadingly, known as indium tin oxide or ITO) is at present the most important TCO, with applications in liquid crystal displays, touch screen displays, organic photovoltaics and other optoelectronic devices. Surprisingly, many of its fundamental properties have been the subject of controversy or have until recently remained unknown, including even the nature and magnitude of the bandgap. The technological importance of the material and the renewed interest in its basic physics prompted the research described in this thesis. This thesis aims (i) to establish conditions for the growth of high-quality In2O3 nanostructures and thin films by oxygen plasma assisted molecular beam epitaxy and (ii) to conduct comprehensive investigations on both the surface physics of this material and its structural and electronic properties. It was demonstrated that highly ordered In2O3 nanoislands, nanorods and thin films can be grown epitaxially on (100), (110) and (111) oriented Y-stabilized ZrO2 substrates respectively. The mismatch with this substrate is -1.7%, with the epilayer under tensile strain. On the basis of ab initio density functional theory calculations, it was concluded that the striking influence of substrate orientation on the distinctive growth modes was linked to the fact that the surface energy for the (111) surface is much lower than for either polar (100) or non-polar (110) surfaces. The growth of In2O3(111) thin films was further explored on Y-ZrO2(111) substrates by optimizing the growth temperature and film thickness. Very thin In2O3 epilayers (35 nm) grew pseudomorphically under high tensile strain, caused by the 1.7% lattice mismatch with the substrate. The strain was gradually relaxed with increasing film thickness. High-quality films with a low carrier concentration (5.0  1017 cm-3) and high mobility (73 cm2V-1s-1) were obtained in the thickest films (420 nm) after strain relaxation. The bandgap of the thinnest In2O3 films was around 0.1 eV smaller than that of the bulk material, due to reduction of bonding-antibonding interactions associated with lattice expansion. The high-quality surfaces of the (111) films allowed us to investigate various aspects of the surface structural and electronic properties. The atomic structure of In2O3 (111) surface was determined using a combination of scanning tunnelling microscopy, analysis of intensity/voltage curves in low energy electron diffraction and first-principles ab initio calculations. The (111) termination has an essentially bulk terminated (1 × 1) surface structure, with minor relaxations normal to the surface. Good agreement was found between the experimental surface structure and that derived from ab initio density functional theory calculations. This work emphasises the benefits of a multi-technique approach to determination of surface structure. The electronic properties of In2O3(111) surfaces were probed by synchrotron-based photoemission spectroscopy using photons with energies ranging from the ultraviolet (6 eV) to the hard X-ray regime (6000 eV) to excite the spectra. It has been shown that In2O3 is a highly covalent material, with significant hybridization between O and In orbitals in both the valence and the conduction bands. A pronounced electron accumulation layer presents itself at the surfaces of undoped In2O3 films with very low carrier concentrations, which results from the fact the charge neutrality level of In2O3 lies well above the conduction band minimum. The pronounced electron accumulation associated with a downward band bending in the near surface region creates a confining potential well, which causes the electrons in the conduction band become quantized into two subband states, as observed by angle resolved photoemission spectra (ARPES) Fermi surface mapping. The accumulation of high density of electrons near to the surface region was found to shrink the surface band gap through many body interactions. Finally epitaxial growth of In2O3 thin films on α-Al2O3(0001) substrates was investigated. Both the stable body centred cubic phase and the metastable hexagonal corundum In2O3 phase can be stabilized as epitaxial thin films, despite large mismatches with the substrate. The growth mode involves matching small but different integral multiples of lattice planes of the In2O3 and the substrate in a domain matching epitaxial growth mode.

Reduced activation oxide dispersion strengthened (ODS) steels are candidate alloys for use in fusion reactor systems and are fabricated by mechanically alloying yttrium oxide to a reduced activation ferritic steel powder. The product is consolidated at high temperature by hot isostatic pressing (HIP), producing a dispersion of nanometre sized oxide particles throughout the ferritic microstructure. These particles have been shown to both improve the high temperature mechanical properties of the alloy and provide trapping sites for helium gas. The use of these particles to sequester helium is of particular significance in the development of a structural ODS steel for fusion reactor systems. A fusion power reactor, based on the ITER design, is expected to produce over 2000 appm transmutant helium in any steel components exposed to the core neutron flux. At these gas concentrations, conventional steels undergo severe swelling and embrittlement, motivating the development of materials capable of managing helium accumulation. This thesis investigates the use of the oxide particle dispersion in sequestering helium introduced by ion implantation. An initial characterisation of a model Fe-14Cr-0.25Y₂O₃ (wt%) system was completed using high resolution transmission electron microscopy (HRTEM) and atom probe tomography (APT). This demonstrated the efficacy of the production methods and the gas trapping capabilities of the oxide particles via argon gas, introduced during the mechanical alloying process. The subsequent consolidation of a full set of Fe-14Cr-3W-0.2Ti-0.25Y₂O₃ (wt%) ODS alloys at 1150°C, 1050 °C and 950 °C produced a systematic variation in the density of the particle dispersion. The characterisation of these materials using APT provided an insight into the consistent Y₂Ti₃O₅ particle chemistry found in each consolidation, and identified a stoichiometric shift from Y₂Ti₃O₅ to YTiO2 following short term annealing periods at 1000°C. Though further work is required, this shift is thought to be consistent with a thermodynamically mediated transition of the metastable clusters to stable oxide particles. Following implantation with 2000 appm helium and examination under TEM, the helium bubble and particle densities were found to be closely correlated thus providing evidence for an association between the particles and the gas bubbles. Controlling the helium bubble density via the particle dispersion demonstrates the potential use of processing temperature in controlling how helium accumulates in an implanted ODS microstructure. The effects of both bubble and particle densities on mechanical properties were investigated further using nanoindentation methods. Significant local variation in the hardness of the ODS steels was found to result from the bimodal grain size distribution of the material. By using only those measurements taken from large grained regions of the ODS, the grain refinement and particle hardening effects could be deconvolved and used to quantify particle hardening using a dispersed barrier model. The significant hardening effects with helium addition observed in the reference alloys were found to be almost entirely absent from the ODS systems, though anomalous softening in the 950°C consolidation indicated a potentially unexpected interaction between the bubble and particle populations. A possible explanation for this anomaly and a proposal for further work to establish its origin is discussed.

Nanomaterials have attracted great interest due to the unique physical properties and great potential in the applications of nanoscale devices. Two dimensional atomic crystals, which are atomic thickness, especially graphene, have triggered the gold rush recently due to the fascinating high mobility at room temperature for future electronics. The crystal structure of nanomaterials will have great influence on their physical properties. Thus, this thesis is focused on developing the methods to control the crystal structure of nanomaterials, namely quantum dots as semiconductor, boron nitride (BN) as insulator, graphene as semimetal, with low cost for their applications in photonics, structural support and electronics. In this thesis, firstly, Mn doped ZnSe quantum dots have been synthesized using colloidal synthesis. The shape control of Mn doped ZnSe quantum dots has been achieved from branched to spherical by switching the injection temperature from kinetics to thermodynamics region. Injection rates have been found to have effect on controlling the crystal phase from zinc blende to wurtzite. The structural-property relationship has been investigated. It is found that the spherical wurtzite Mn doped ZnSe quantum dots have the highest quantum yield comparing with other shape or crystal phase of the dots. Then, the Mn doped ZnSe quantum dots were deposited onto the BN sheets, which were micron-sized and fabricated by chemical exfoliation, for high resolution imaging. It is the first demonstration of utilizing ultrathin carbon free 2D atomic crystal as support for high resolution imaging. Phase contrast images reveal moiré interference patterns between nanocrystals and BN substrate that are used to determine the relative orientation of the nanocrystals with respect to the BN sheets and interference lattice planes using a newly developed equation method. Double diffraction is observed and has been analyzed using a vector method. As only a few microns sized 2D atomic crystal, like BN, can be fabricated by the chemical exfoliation. Chemical vapour deposition (CVD) is as used as an alternative to fabricate large area graphene. The mechanism and growth dynamics of graphene domains have been investigated using Cu catalyzed atmospheric pressure CVD. Rectangular few layer graphene domains were synthesized for the first time. It only grows on the Cu grains with (111) orientation due to the interplay between atomic structure of Cu lattice and graphene domains. Hexagonal graphene domains can form on nearly all non-(111) Cu surfaces. The few layer hexagonal single crystal graphene domains were aligned in their crystallographic orientation over millimetre scale. In order to improve the alignment and reduce the layer of graphene domains, a novel method is invented to perform the CVD reaction above the melting point of copper (1090 ºC) and using molybdenum or tungsten to prevent the balling of the copper from dewetting. By controlling the amount of hydrogen during the growth, individual single crystal domains of monolayer over 200 µm are produced determined by electron diffraction mapping. Raman mapping shows the monolayer nature of graphene grown by this method. This graphene exhibits a linear dispersion relationship and no sign of doping. The large scale alignment of monolayer hexagonal graphene domains with epitaxial relationship on Cu is the key to get wafer-sized single crystal monolayer graphene films. This paves the way for industry scale production of 2D single crystal graphene.

The combination of X-ray imaging and diffraction techniques provides a unique tool for structural and mechanical analysis of engineering components. A variety of modes can be employed in terms of the spatial resolution (length-scale), time resolution (frequency), and the nature of the physical quantity being interrogated. This thesis describes my contributions towards the development of novel X-ray “rich” imaging experimental techniques and data interpretation. The experimental findings have been validated via comparison with other experimental methods and numerical modelling. The combination of fast acquisition rate and high penetration properties of X-ray beams allows the collection of high-resolution 3-D tomographic data sets at submicron resolution during in situ deformation experiments. Digital Volume Correlation analysis tools developed in this study help understand crack propagation mechanisms in quasi-brittle materials and elasto-plastic deformation in co-sprayed composites. For the cases of crystalline specimens where the knowledge of “live” or residual elastic strain distributions is required, diffraction techniques have been advanced. Diffraction Strain Tomography (DST) allows non-destructive reconstruction of the 2-D (in-plane) variation of the out-of-plane strain component. Another diffraction modality dubbed Laue Orientation Tomography (LOT), a grain mapping approach has been proposed and developed based on the translate-rotate tomographic acquisition strategy. It allows the reconstruction of grain shape and orientation within polycrystalline samples, and provides information about intragranular lattice strain and distortion. The implications of this method have been thoroughly investigated. State-of-the-art engineering characterisation techniques evolve towards scrutinising submicron scale structural features and strain variation using the complementarity of X-ray imaging and diffraction. The first successful feasibility study is reported of in operando stress analysis in an internal combustion engine. Finally, further advancement of ‘rich’ imaging techniques is illustrated via the first successful application of Time-of-Flight Neutron Diffraction Strain (TOF-NDST) tomography for non-destructive reconstruction of the complete strain tensor using an inverse eigenstrain formulation.

A study of three novel solar cells is presented, all of which incorporate a low-dimensional quantum confined component in a bid to enhance device performance. Firstly, intermediate band solar cells (IBSCs) based on InAs quantum dots (QDs) in a GaAs p-i-n structure are studied. The aim is to isolate the InAs QDs from the GaAs conduction band by surrounding them with wider band gap aluminium arsenide. An increase in open circuit voltage (V_OC) and decrease in short circuit current (J_sc) is observed, causing no overall change in power conversion efficiency. Dark current - voltage measurements show that the increase in V_OC is due to reduced recombination. Electroreflectance and external quantum efficiency measurements attribute the decrease in J_sc primarily to a reduction in InGaAs states between the InAs QD and GaAs which act as an extraction pathway for charges in the control device. A colloidal quantum dot (CQD) bulk heterojunction (BHJ) solar cell composed of a blend of PbS CQDs and ZnO nanoparticles is examined next. The aim of the BHJ is to increase charge separation by increasing the heterojunction interface. Different concentration ratios of each phase are tested and show no change in J_sc, due primarily to poor overall charge transport in the blend. V_OC increases for a 30 wt% ZnO blend, and this is attributed largely to a reduction in shunt resistance in the BHJ devices. Finally, graphene is compared to indium tin oxide (ITO) as an alternative transparent electrode in squaraine/ C₇₀ solar cells. Due to graphene’s high transparency, graphene devices have enhanced J_sc, however, its poor sheet resistance increases the series resistance through the device, leading to a poorer fill factor. V_OC is raised by using MoO₃ as a hole blocking layer. Absorption in the squaraine layer is found to be more conducive to current extraction than in the C₇₀ layer. This is due to better matching of exciton diffusion length and layer thickness in the squaraine and to the minority carrier blocking layer adjacent to the squaraine being more effective than the one adjacent to the C₇₀.

This thesis explores the capacity of sterically and electronically unsaturated boranes to bind substrates of biological and environmental interest, and transduce such binding events into a photo-physical and/or electrochemical response, hence reporting the presence of these substrates. Chapter three details the synthesis of a range of novel ferrocenyl boranes featuring either a proximal hydrogen-bond donor or a second Lewis acidic centre. These novel boranes were shown to be competent at binding both cyanide and fluoride anions, with the role played by a proximal hydrogen-bond donor or a second Lewis acidic centre in anion binding investigated by both NMR and crystallographic studies. Chapter four reports the synthesis of novel pyridinyl and related boronic esters, as well as unexpected mixed alkenyl/aryl boranes. The capacity of both types of system to bind fluoride or cyanide anions in solution was investigated by UV-Vis and NMR studies. The photo-physical responses to these anions were also probed, leading to the establishment of both switch-on and switch-off fluorescent responses. Chapter five extends the knowledge derived from selective anion receptor design and combines this with recent developments in the field of frustrated Lewis pairs (FLPs) to activate, bind and report the presence of nitrous oxide (N₂O) molecule. Thus, the syntheses of novel, highly Lewis acidic ferrocenyl boranes that incorporate a high degree of steric loading around the boron centre are reported. The electrochemical and photo-physical response of an FLP system to the presence of N₂O was investigated leading to the development of a novel N₂O reporting system.

Metal oxides are of immense technological importance. Their wide variety of structural and electronic characteristics leads to a flexibility unrivalled by other groups of materials. However, there is still much debate about the fundamental properties of some of the most widely used oxides, including TiO₂ and In₂O₃. This work presents high quality, in-depth characterisation of these two oxides in pure and doped form, including soft and hard X-ray photoelectron spectroscopy and X-ray diffraction. Bulk samples as well as thin film samples were prepared analysed. For the preparation of thin films a high quality sol-gel dip-coating method was developed, which resulted in epitaxial films. In more detail the organisation of the thesis is as follows: Chapter 1 provides an introduction to key ideas related to metal oxides and presents the metal oxides investigated in this thesis, In₂O₃, Ga₂O₃, Tl₂O₃, TiO₂, and SnO₂. Chapter 2 presents background information and Chapter 3 gives the practical details of the experimental techniques employed. Chapters 4 presents reciprocal space maps of MBE-grown In₂O₃ thin films and nanorods on YSZ substrates. Chapters 5 and 6 investigate the doping of In₂O₃ bulk samples with gallium and thallium and introduce a range of solid state characterisation techniques. Chapter 7 describes the development of a dip-coating sol-gel method for the growth of thin films of TiO₂ and shows 3D reciprocal space maps of the resulting films. Chapter 8 concerns hard x-ray photoelectron spectroscopy of undoped and Sn-doped TiO₂. Chapter 9 interconnects previous chapters by presenting 2D reciprocal space maps of nano structured epitaxial samples of In₂O₃ grown by the newly developed sol-gel based method. Chapter 10 concludes this thesis with a summary of the results.

Tissue engineers – in order to develop therapies for the treatment of complex neurological injuries and diseases – attempt to recreate elaborate developmental mechanisms in vitro. Neuronal precursor cells are excellent candidates for the study of developmental operations such as cell adhesion, differentiation, and axonal pathfinding. Hyaluronan (HA) is a common polysaccharide that is found extensively throughout the neuronal extracellular matrix (ECM), and can be functionalised and crosslinked to form stable hydrogels that support growing neuronal cells. Hyaluronan hydrogels can be modified chemically and mechanically to mimic the ECM of the developing brain, awarding control over mechanisms such as differentiation and axonal pathfinding. This thesis is concerned with the functionalisation and characterisation of HA hydrogels, ultimately in order to simulate vital properties of the developing brain. Here we show that HA hydrogels can be finely tuned mechanically (by modulating stiffness and viscosity), and chemically, by the conjugation of peptides that mimic the neural cell adhesion molecule (NCAM). NCAM mimics and novel mimics of sialylated NCAM significantly influence the differentiation of NSPCs in 2D and 3D. HA hydrogels successfully support long term culture of neural cells in 3D, and encourage the formation and extension of neurites of several cell types including human, mouse and rat neuronal precursor and stem cells. These results demonstrate for the first time that novel NCAM mimicking peptides can be conjugated to well defined hydrogel matrices that influence intricate developmental behaviours in 3D. Understanding how neural cells form functional networks is essential for the development of clinical approaches that attempt to address the injuries and diseases that affect these systems.

Carbon-based materials are poised to be an important class of 21st century materials, for bio-medical, bio-electronic, and bio-sensing applications. Diamond and polymers are two examples of carbon-based materials of high interest to the bio-materials community. Diamond, in its conductive form, can be used as an electrochemical bio-sensor, whilst its nanoparticle form is considered a non-inflammatory platform to deliver drugs or to grow neuronal cells. Polymers, especially when chemically modified, have been used extensively in biological environments, from anti-microbial use to drug delivery. The large-scale use of either material for biological use is limited by two factors: ease of chemical modification and the paucity of knowledge of their surface chemistry in aqueous media. This thesis addresses aspects of both these issues. The first study reported is an in situ study of the adsorption dynamics of an exemplar globular protein (bovine serum albumin, BSA) on nanodiamond using the relatively novel quartz crystal microbalance with dissipation (QCM-D) technique. For the first time, QCM-D enabled the detailed study of protein dynamics (i.e. kinetics, viscoelastic properties, overlayer structure, etc.) onto nanodiamond thin films having various surface chemistry and roughness. The dynamics of protein adsorption is found to be sensitive to surface chemistry at all stages of adsorption, but it is only sensitive to surface roughness during initial adsorption phases. Our understanding of the nanodiamond-biology interface is enhanced by this study, and it suggests that QCM-D is useful for the study of the surface chemistry of nanoparticle forms of inorganic materials. A second study concerns a novel surface functionalization scheme, based on carbene and azo-coupling chemistry, which has been recently introduced as a practical, facile method for modifying the surfaces of polymers. Using modern surface characterization techniques, it is demonstrated that a chemical linker can be attached to polystyrene surfaces using carbene-based chemistry, and that further chemical functionality can be added to this chemical linker via an azo-coupling reaction. In situ studies of protein dynamics at these interfaces were conducted using QCM-D, thus enabling a link between specific protein behaviour and the polymer surface chemical termination chemistry to be made. A third area of study of investigates the use of diamond electrodes as a bio-sensor for dopamine under physiological conditions. For these conditions, ascorbic acid interferes with the dopamine oxidation signal, in ways that render the two signals irresolvable. Various modifications are used in attempts to reduce this interference, including: small and large cathodic treatments, grafting of electro-active polymers, addition of carbon nanotubes, and hydrogen plasma treatment. Those modifications leading to the hydrogen-termination of diamond are shown to work the best. Notably, hydrogen plasma treatment effects the complete electrochemical separation of dopamine and ascorbic acid at a diamond electrode. This is the first time this has been accomplished without adding non-diamond materials to the diamond electrode surface.