Spelling suggestions: "subject:"iir lowmathematical models"" "subject:"iir follows:mathematical models""
1 |
Application of finite-difference methods to steady-state advectionMolenkamp, Charles Richard, 1941- January 1967 (has links)
No description available.
|
2 |
Neighborhood ventilation of a building cluster by combined forcesTsui, Ka-cheung., 徐家祥. January 2008 (has links)
published_or_final_version / Mechanical Engineering / Master / Master of Philosophy
|
3 |
Principles of energy and momentum conservation to analyze and model air flow for perforated ventilation ducts / Modelling perforatred ventilation ductsEl Moueddeb, Khaled. January 1996 (has links)
A theoretical model was developed to predict the air distribution pattern and thus to design perforated ventilation ducts equipped with a fan. The analysis of the air distribution pattern of such systems requires accurate measurement procedures. Several experimental methods were tested and compared. Accordingly, the piezometric flush taps and thermo-anemometer were selected to measure respectively the duct air pressure and the outlet air flow. / Based on the equations of energy and momentum conservation, a model was formulated to predict the air flow performance of perforated ventilation ducts and to evaluate the outlet discharge angle and the duct regain coefficients without evaluating frictional losses. The basic assumptions of the model were validated by experimentally proving the equivalence of the friction losses expressed in the 2 cited equations. When compared to experimental results measured from four wooden perforated ventilation ducts with aperture ratios of 0.5, 1.0, 1.5, and 2.0, the model predicted the outlet air flow along the full length of perforated duct operated under turbulent flow conditions with a maximum error of 9%. The regain coefficient and the energy correction factor were equal to one, and the value of the discharge coefficient remained constant at 0.65, along the full length of the perforated duct. The outlet air jet discharge angle varied along the entire duct length, and was not influenced by friction losses for turbulent flow. / Assuming a common effective outlet area, the model was extended to match the performance of the fan and the perforated duct and to determine their balance operating point.
|
4 |
Outlet discharge coefficients of ventilation ductsKinsman, Roger Gordon January 1990 (has links)
Discharge coefficients are an important parameter in the prediction of the air displacement performance of ventilation outlets and in the design of ventilation ducts. / Discharge coefficients of a wooden ventilation duct 8.54 metres in length and of a constant 0.17 m$ sp2$ cross sectional area were measured. Four different outlet shapes and 3 aperture ratios of each shape were tested. A split plot experimental design was used to evaluate the effect of outlet shape, outlet size, and distance from the fan on discharge coefficient. The relationship between duct performance characteristics and discharge coefficient was examined. A mathematical equation to predict the discharge coefficient was developed and tested. / Discharge coefficient values measured ranged from 0.19 to 1.25 depending on the aperture ratio and distance from the fan. Outlet shape had no significant effect. The apparent effects of aperture ratio and size are due to the effects of head ratio. The equation predicting the discharge coefficient had a maximum error of 5 percent for the aperture ratios of 0.5 and 1.0, and 15 percent at an aperture ratio of 1.5.
|
5 |
Instabilité barotrope du jet de BickleyDeblonde, Godelieve. January 1981 (has links)
No description available.
|
6 |
Outlet discharge coefficients of ventilation ductsKinsman, Roger Gordon January 1990 (has links)
No description available.
|
7 |
Principles of energy and momentum conservation to analyze and model air flow for perforated ventilation ductsEl Moueddeb, Khaled. January 1996 (has links)
No description available.
|
8 |
Instabilité barotrope du jet de BickleyDeblonde, Godelieve. January 1981 (has links)
No description available.
|
9 |
Airflow characterstics [sic] under grain aeration and drying conditions / Airflow characteristics under grain aeration and drying conditionsAbdelmohsin, Gabir Abdelgadir January 2011 (has links)
Typescript (photocopy). / Digitized by Kansas Correctional Industries
|
10 |
Air distribution from ventilation ductsMacKinnon, Ian R. (Ian Roderick), 1964- January 1990 (has links)
A wooden, perforated, uniform cross-section duct was examined to determine the optimum levels of aperture ratio and fan speed with respect to uniformity of discharge. The optimum aperture ratio for the 8.54 m long duct was 1.0 with a uniformity coefficient of 90.28%. The fan speed had little effect on the uniformity of discharge. The friction factor was experimentally determined to be 0.048 for a non-perforated duct and this value was assumed to be the same for a perforated duct of similar construction. A kinetic energy correction factor was used to analyze the flow in the duct. Values for this correction factor were determined from experimental data. Values of the coefficient of discharge and the total duct energy were calculated. A mathematical model was proposed based on the conservation of momentum and the Bernoulli's equation. The model responded favourably and predicted the duct velocity nearly perfectly and slightly underestimated the total duct energy.
|
Page generated in 0.1019 seconds