Conducting single frame orthorectification on satellite images to create an ortho-image requires four basic components, namely an image, a geometric sensor model, elevation data (for example a digital elevation model (DEM)) and ground control points (GCPs). For this study, orthorectification was executed numerous times (in three stages) and each time components were altered to test the geometric accuracy of the resulting ortho-image. Most notably, the distribution and number of ground control points, the quality of the elevation source and the geometric sensor model or lack thereof were altered. Results were analysed through triangulating and comparing the geolocation accuracy of the ortho-images. The application of these different methods to perform orthorectification encompass the aim of this paper, which was to investigate and compare the positional accuracies of ortho-images under various orthorectification scenarios and provide improved geometric accuracies of VHR satellite imagery when diverse ground control and elevation data sources are available. By investigating the influence that the distribution and number of GCPs and the quality of DEMs have on the positional accuracy of an ortho-image, it became clear that a reasonable increase in the number of uniformly distributed GCPs combined with progressively accurate DEMs will ultimately improve the quality of the orthorectified product. The results also showed that when more GCPs were applied, the smaller the difference in accuracy was between the different DEMs utilised. It was interesting to note that when it is suitable to manually collect well-distributed GCPs using a GPS handheld device over the study area then a very accurate result can be expected. Nonetheless, it is also important to note that if it is not possible/practical to achieve the latter, satellite based GCP collection do provide a very good alternative. It was also determined that utilising GCPs which were extracted from vector road layers to only cover specific areas in the image scene produced less favourable results. Several contributions towards improved orthorectification procedures were made in this study. These include the development of an automatic GCP extraction script (A-GCP-ES), written in the Python scripting language with the purpose to ease the process of manually placing GCPs on an input image when repeatedly performing orthorectification. / Thesis (PhD)--University of Pretoria, 2016. / Geography, Geoinformatics and Meteorology / PhD / Unrestricted

A sustainable society is a society that satisfies its resource requirements without endangering the sustainability of these resources. The mineral endowment on the African continent is estimated to be the first or second largest of world reserves. Therefore, it is recognised that the African continent still heavily depends on mineral exports as a key contributor to the gross domestic product (GDP) of various countries. These mining activities, however, do introduce primary and secondary environmental degradation factors. They attract communities to these mining areas, light and heavy industrial establishments occur, giving rise to artisanal activities. This study focussed on satellite RS products as an aid to a mine’s operations and the monitoring of its environment. Effective operational mine management and control ensures a more sustainable and profitable lifecycle for mines. Satellite based RS holds the potential to observe the mine and its surrounding areas at high temporal intervals, different spectral wavelengths and spatial resolutions. The combination of SAR and optical information creates a spatial platform to observe and measure the mine’s operations and the behaviour of specific land cover and land use classes over time and contributes to a better understanding of the mining activities and their influence on the environment within a specific geographical area. This study will introduce an integrated methodology to collect, process and analyse spatial information over a specific targeted mine. This methodology utilises a medium resolution land cover base map, derived from Landsat 8, to understand the predominant land cover types of the surrounding area. Using very high resolution mono- and stereoscopic satellite imagery provides a finer scale analysis and identifies changes in features at a smaller scale. Combining these technologies with the synthetic aperture radar (SAR) applications for precise measurement of surface subsidence or upliftment becomes a spatial toolbox for mine management. This study examines a combination of satellite remote sensing products guided by a systematic workflow methodology to integrate spatial results as an aid for mining operations and environmental monitoring. Some of the results that can be highlighted is the successful land cover classification using the Landsat 8 satellite. The land cover that dominated the Kolomela mine area was the “SHRUBLAND/GRASS” class with a 94% coverage and “MINE” class of 2.6%. Sishen mine had a similar dominated land cover characteristic with a “SHRUBLAND/GRASS” class of 90% and “MINE” class of 4.8%. The Pléiades time-series classification analysis was done using three scenes each acquired at a different time interval. The Sishen and Kolomela mine showed especially changes from the bare soil class to the asphalt or mine class. The Pléiades stereoscopic analysis provided volumetric change detection over small, medium, large and recessed areas. Both the Sishen and Kolomela mines demonstrated height profile changes in each selected category. The last category of results focused on the SAR technology to measure within millimetre accuracy the subsidence and upliftment behaviour of surface areas over time. The Royal Bafokeng Platinum tailings pond area was measured using 74 TerraSAR-X scenes. The tailings wall area was confirmed as stable with natural subsidence that occurred in its surrounding area due to seasonal changes of the soil during rainy and dry periods. The Chuquicamata mine as a large open pit copper mine area was analysed using 52 TerraSAR-X scenes. The analysis demonstrated significant vertical surface movement over some of the dumping sites. It is the wish of the researcher that this dissertation and future research scholars will continue to contribute in this scientific field. These contributions can only assist the mining sector to continuously improve its mining operations as well as its monitoring of the primary as well as the secondary environmental impacts to ensure improved sustainability for the next generation. / Environmental Sciences / M. Sc. (Environmental Science)