Spelling suggestions: "subject:"aircraft emphasizing"" "subject:"ircraft emphasizing""
1 |
Robust aircraft subsystem conceptual architectingJackson, David Wayne 13 January 2014 (has links)
Aircraft subsystems are key components in modern aircraft, the impact and significance of which have been constantly increasing. Furthermore, the architecture selection of these subsystems has overall system-level effects. Despite the significant effects of architecture selections, existing methods for determining the architecture, especially early in design, are similar to the use of traditional point solutions.
Currently, aircraft subsystems are rarely examined during the conceptual design phase, despite the fact that this phase has a significant influence on aircraft cost and performance. For this reason, there is a critical need to examine subsystem architecture trades and investigate the design space during the conceptual design of an aircraft. Traditionally, after the aircraft conceptual design phase, subsystems are developed in a process that begins with the point selection of the architecture, then continues with its development and analysis, and concludes in the detailed development of the subsystems. The choice of the point design of the architecture to be developed can be made using simplified models to explore the design space. This method known as conceptual architecting is explored in this dissertation.
This dissertation also focuses on bringing actuation subsystem architecture trades into conceptual design because of the significant cost impact of this design phase and the interdependence of vehicle sizing with the subsystems impact on the aircraft. The extent of these interdependencies is examined and found to be significant. As a result, this coupling must be captured to enable better informed decision making. A methodology to examine the design space of aircraft subsystem architectures during the conceptual design of aircraft, while incorporating this coupling, is presented herein and applied specifically to actuation architectures.
|
2 |
A multi-disciplinary conceptual design methodology for assessing control authority on a hybrid wing body configurationGarmendia, Daniel Charles 07 January 2016 (has links)
The primary research objective was to develop a methodology to support conceptual design of the Hybrid Wing Body (HWB) configuration. The absence of a horizontal tail imposes new stability and control requirements on the planform, and therefore requiring greater emphasis on control authority assessment than is typical for conceptual design. This required investigations into three primary areas of research. The first was to develop a method for designing an appropriate amount of redundancy. This was motivated widely varying numbers of trailing edge elevons in the HWB literature, and inadequate explanations for these early design decisions. The method identifies stakeholders, metrics of interest, and synthesizes these metrics using the Breguet range equation for system level comparison of control surface layouts. The second area of research was the development trim analysis methods that could accommodate redundant control surfaces, for which conventional methods performed poorly. A new measure of control authority was developed for vehicles with redundant controls. This is accomplished using concepts from the control allocation literature such as the attainable moment subset and the direct allocation method. The result is a continuous measure of remaining control authority suitable for use during HWB sizing and optimization. The final research area integrated performance and control authority to create a HWB sizing environment, and investigations into how to use it for design space exploration and vehicle optimization complete the methodology. The Monte Carlo Simulation method is used to map the design space, identify good designs for optimization, and to develop design heuristics. Finally, HWB optimization experiments were performed to discover best practices for conceptual design.
|
3 |
Modeling Hybrid-Electric Aircraft and their Fleet-Level CO<sub>2</sub> Emission ImpactsSamarth Jain (13954977) 03 January 2023 (has links)
<p> </p>
<p>With rising concerns over commercial aviation’s contribution to global carbon emissions, there exists a tremendous pressure on the aviation industry to find advanced technological solutions to reduce its share of CO2 emissions. Single-aisle (or narrowbody) aircraft are the biggest contributors to CO2 emissions by number of operations, insisting a need to reduce / eliminate their aircraft-level fuel consumption as soon as possible. A potential solution for this is to operate fully-electric single-aisle aircraft; however, the limitations of the current (and predicted future) battery technology is forcing the industry to explore hybrid-electric aircraft as a possible mid-term solution.</p>
<p>Modeling hybrid-electric aircraft comes with its own challenges due to the presence of two different propulsion sources – gas turbine engines (powered by Jet-A fuel) and electric motors (powered by batteries). Since traditional sizing approaches and legacy sizing tools do not seem to work well for hybrid-electric aircraft, this work presents a “flight-mechanics-based” conceptual sizing tool for hybrid-electric aircraft, set up as a Multidisciplinary Design Optimization (MDO) toolbox. Some of the key features of the sizing tool include concurrently sizing the electric motors and downsizing the gas turbine engines while meeting the one-engine-inoperative (OEI) and top-of-climb constraints, and re-sizing the fuselage to account for the volumetric constraints associated with required batteries.</p>
<p>Current work considers a parallel hybrid-electric single-aisle aircraft with a 900 nmi design range, with electric power augmentation (with electric motors operating at full throttle) available only for the takeoff and climb segments when sizing the aircraft. Four hybrid-electric propulsion technology cases are considered, and the resulting hybrid-electric aircraft show 15.0% to 22.5% reduction in fuel burn compared to a Boeing 737-800 aircraft.</p>
<p>Another challenge with modeling hybrid-electric aircraft is determining their off-design performance characteristics (considering a different payload or mission range, or both). This work presents an energy management tool – set up as a nonlinear programming optimization problem – to minimize the fuel burn for a payload-range combination by identifying the optimal combination of throttle settings for the gas turbine engines and the electric motors during takeoff, climb, and cruise, along with identifying an optimal flight path. The energy management tool enables fuel savings of at least of 2%, with actual savings ranging from 142.1 lbs to 276.1 lbs per trip for a sample route (LGA–ORD) at a 80% load factor.</p>
<p>Although the hybrid-electric aircraft sizing and performance analysis studies show encouraging results about the potential reduction in carbon emissions at an aircraft level, the future fleet-level carbon emissions are not expected to reduce proportionally to these aircraft level emission reductions. This work predicts the fleet-level environmental impacts of future single-aisle parallel hybrid-electric aircraft by modeling the behavior of a profit-seeking airline (with a mixture of conventional all Jet-A fuel burning and hybrid electric aircraft in its fleet) using the Fleet-Level Environmental Evaluation Tool (FLEET). FLEET’s model-based predictions rely upon historically-based information about US-touching airline routes and passenger demand served by US flag-carrier airlines from the Bureau of Transportation Statistics to initiate model-based predictions of future demand, aircraft fleet mix, and aircraft operations. Using the aircraft performance coefficients from the energy management tool to represent the behavior of a single-aisle parallel hybrid-electric aircraft, the FLEET simulation predicts the changes in the fleet-wide carbon emissions due to the introduction of this new aircraft in an airline fleet in the year 2035. By 2055, FLEET results predict that the fleet-wide CO2 emissions with hybrid-electric aircraft in the fleet mix are at least 1.2% lower than the fleet-wide CO2 emissions of a conventional (all Jet-A fuel burning) aircraft-only airline. The rather limited reduction in emissions is an attribute of the reduced range capability and higher operating cost of the hybrid-electric aircraft (relative to a conventional aircraft of similar size). This causes the airline to change the usage, acquisition and retirement of its conventional aircraft when hybrid-electric aircraft are available; this is most notable to serve passenger demand on certain predominantly single-aisle service routes that cannot be flown by the future single-aisle hybrid-electric aircraft. </p>
|
Page generated in 0.0388 seconds