Made available in DSpace on 2014-12-17T14:09:14Z (GMT). No. of bitstreams: 1 AnaADP_TESE.pdf: 2810011 bytes, checksum: 6f11363dfc6e540fe688b7737b77893b (MD5) Previous issue date: 2012-11-04 / Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ? C in the ratios of heating of 5, 10 and 20 ? C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline / Com o objetivo de reduzir e reutilizar o res?duo de borra oleosa de petr?leo, gerado em grandes volumes pela ind?stria petrol?fera, materiais nanoestruturados dos tipos Al-MCM-41 e Al-SBA-15, com raz?es de Si/Al = 50, foram sintetizados, calcinados e utilizados como s?lidos catal?ticos na degrada??o termocatal?tica da borra oleosa de petr?leo, proveniente do campo petrol?fero Canto do Amaro, no estado do Rio Grande do Norte. As amostras dos materiais nanoestruturados foram caracterizadas por an?lise termogravim?trica (TG/DTG), difra??o de raios X (DRX), microscopia eletr?nica de varredura (MEV), espectroscopia de absor??o na regi?o do infravermelho com transformada de Fourier (FT-IR) e adsor??o de nitrog?nio (BET). A caracteriza??o mostrou que os materiais sintetizados resultaram em um catalisador nanoestruturado, ordenado e com di?metro de poros e ?rea superficial de acordo com a literatura existente. A amostra de borra oleosa foi caracterizada atrav?s da determina??o do grau API e do teor de enxofre e da an?lise do SARA (saturados, arom?ticos, resinas e asfaltenos). Os resultados mostraram um material equivalente ao petr?leo m?dio, com grau API de 26,1, baixo teor de enxofre e com quantidade consider?vel de resinas e asfaltenos, acima da apresentada na literatura. A degrada??o t?rmica e catal?tica da borra oleosa de petr?leo foi realizada da temperatura ambiente at? 870?C, nas raz?es de aquecimento de 5, 10 e 20oC min-1. As curvas geradas pela TG/DTG apresentaram uma degrada??o mais acelerada da borra oleosa quando se introduziram os materiais nanoestruturados. Esses resultados foram ratificados pela energia de ativa??o, calculada atrav?s do m?todo de Flynn-Wall, em que a presen?a dos catalisadores reduziu a energia, em especial na faixa de craqueamento, mostrando a efici?ncia do processo, principalmente para a extra??o de materiais leves da composi??o da borra oleosa, como diesel e gasolina

Made available in DSpace on 2014-12-17T15:41:45Z (GMT). No. of bitstreams: 1 MariaJFCpdf.pdf: 4931245 bytes, checksum: 45a7ea893d17f478c73adf56787579aa (MD5) Previous issue date: 2008-12-22 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The present work reports the study of nanoporous structures, aiming at their use in research directed to the current demand of the petroleum industry to value heavy oil. Initially, two ways were chosen for the synthesis of porous structures from the molecular sieves of type Si-MCM-41. In the first way, the structure MCM-41 is precursory for heteroatom substitutes of silicon, generating catalyst of the type Al-MCM-41 from two different methods of incorporation of the metal. This variation of the incorporation method of Aluminum in the structure of Si-MCM-41 was carried out through the conventional procedure, where the aluminum source was incorporated to the gel of synthesis, and the procedure post-synthesis, where the Aluminum source was incorporated in catalyst after the synthesis of Si-MCM-41. In the second way, the MCM-41 acts as a support for growth of nanocrystals of zeolite embedded in their mesoporous, resulting in hybrid MCM-41/ZSM-5 catalyst. A comparative analysis was carried through characterizations by XRD, FTIR, measures of acidity through n-butylamine adsorption for TGA, SEM-XRF and N2 adsorption. Also crystalline aluminosilicate with zeolitic structure MFI of type ZSM-5 was synthesized without using organic templates. Methodologies to the preparation of these materials are related by literature using conventionally reactants that supply oxides of necessary silicon and aluminum, as well as a template agent, and in some cases co-template. The search for new routes of preparation for the ZSM-5 aimed at, above all, the optimization of the same as for the time and the temperature of synthesis, and mainly the elimination of the use of organic templates, that are material of high cost and generally very toxic. The current study is based on the use of the H2O and Na+ cations playing the role of structural template and charge compensation in the structure. Characterizations by XRD, FTIR, SEM-XRF and N2 adsorption were also conducted for this material in order to compare the samples of ZSM-5 synthesized in the absence of template and those used industrially and synthesized using structuring / O presente trabalho relata o estudo de estruturas nanoporosas, visando o uso em pesquisas que atendam a atual demanda da ind?stria do petr?leo, de valorizar ?leos pesados. Inicialmente, optou-se por duas vertentes para a s?ntese de estruturas porosas a partir da peneira molecular do tipo Si-MCM-41. Na primeira vertente, a estrutura MCM-41 ? precursora para hetero?tomos substituintes do sil?cio, gerando catalisadores do tipo Al-MCM-41 a partir de dois diferentes m?todos de incorpora??o do metal. Essa varia??o do m?todo de incorpora??o do Alum?nio na estrutura do Si-MCM-41 se deu atrav?s do procedimento convencional, no qual a fonte de alum?nio foi incorporada ao gel de s?ntese e do procedimento p?s-s?ntese, no qual a fonte de Alum?nio foi incorporada ao catalisador ap?s a s?ntese do Si-MCM-41. Na segunda vertente, o MCM-41 age como suporte para o crescimento de nanocristais de ze?lita embutidos nos seus mesoporos, resultando no catalisador h?brido MCM-41/ZSM-5. Uma an?lise comparativa foi realizada atrav?s de caracteriza??es por XRD, FTIR, medidas de acidez atrav?s de dessor??o de n-butilamina por TGA, SEM-XRF e Adsor??o de N2. Tamb?m foi sintetizado um aluminossilicato cristalino com estrutura zeol?tica MFI do tipo ZSM-5, na aus?ncia total de direcionador org?nico. Metodologias relacionadas ? prepara??o desses materiais s?o relatadas pela literatura utilizando-se convencionalmente reagentes que forne?am os ?xidos de sil?cio e de alum?nio necess?rios, bem como um agente direcionador, e em alguns casos at? co-direcionadores. A busca por novas rotas de prepara??o para a ZSM-5 visou, sobretudo, a otimiza??o da mesma no que se refere ao tempo e ? temperatura de s?ntese, e principalmente a elimina??o do uso dos direcionadores org?nicos, que s?o materiais de alto custo e geralmente muito t?xicos. O atual estudo se baseia na utiliza??o da H2O e dos c?tions Na+ desempenhando o papel de direcionamento estrutural e compensa??o de cargas na estrutura. Caracteriza??es por XRD, FTIR, SEM-XRF e Adsor??o de N2 tamb?m foram realizadas para esse material, a fim de comparar as amostras de ZSM-5 sintetizadas na aus?ncia do direcionador e aquelas utilizadas industrialmente e sintetizadas utilizando estruturantes