No description available.

This Thesis describes the activity and mechanism of alkaline earth organohydroborate, tetrahydroborate and alkoxide catalysts for the ring-opening polymerisation (ROP) of cyclic esters including rac-, L-, D- and meso-lactide (LA), and rac-β-butyrolactone (rac-BBL). <b>Chapter One</b> introduces cyclic esters and general mechanisms for their ROP to give polyesters. Living and immortal ROP, an overview of stereocontrolled ROP, and determination of polylactide (PLA) stereosequences are given. Various techniques for polymer characterisations are also described. <b>Chapter Two</b> describes the activity and mechanism of heavy alkaline earth organohydroborate complexes for the ROP of LA. The synthesis and characterisation of alkaline earth alkoxide complexes serving as model species are also described, together with their activities for the ROP of LA. <b>Chapter Three</b> describes the activity and mechanism of a cyclic organohydroborate calcium complex for the ROP of LA. The role of borinic esters as chain transfer agents in the ROP of rac-LA is also discussed. <b>Chapter Four</b> describes the activity and mechanism of heavy alkaline earth tetrahydroborate complexes for the ROP of LA. The immortal ROP of rac-LA using heavy alkaline earth alkoxide complexes and borate esters as chain transfer agents is discussed. <b>Chapter Five</b> describes the activity and mechanism of alkaline earth organohydroborate, tetrahydroborate and alkoxide complexes for the ROP of rac-BBL. <b>Chapter Six</b> presents experimental procedures and characterising data for new complexes reported.

No description available.

A large amount of information concerning interatomic distances in the solid state is available, but little has been done in recent times to comprehensively filter, summarize and analyze this information. Here, I examine the distribution of bond lengths for 135 ions bonded to oxygen, using 180,331 bond lengths extracted from 9367 refined crystal structures collected from the Inorganic Crystal Structure Database (ICSD). The data are used to evaluate the parameterization of the bond-length—bond-valence relation of the bond-valence model. Published bond-valence parameters for 135 cations bonded to oxygen, and the various methods used in their derivation, are evaluated. New equations to model the relation are tested and the common form of the equation is found to be satisfactory. A new method (the Generalized Reduced Gradient Method, GRG method) is used to derive new bond-valence parameters for 135 cations bonded to oxygen, leading to significant improvements in fit for many of the ions. The improved parameterization is used to gain crystal-chemical insight into the milarite structure. A literature review of 350+ published compositions is done to review the end-members of the milarite group and to identify compositions that should have been described as distinct minerals species. The a priori bond-valences are calculated for minerals of this structure, and are used to examine the controls of bond topology on site occupancy, notably by localizing the major source of strain of the structure (the B site). Examination of the compositions of all known milarite-group minerals shows that compositions with a fully occupied B site are less common than those with a vacant B site, in accord with the idea that the B site is a local region of high strain in the structure. The bond-length distributions for the ions of the alkali and alkaline-earth metal families are examined. Variations in mean bond-lengths are only partly explained by the distortion theorem of the bond-valence model. I have found that bond length also correlates with the amount of vibrational displacement of the constituent ions. The validity of some uncommon coordination numbers, e.g., [3]-coordinated Li+, [3]-coordinated Be2+, is confirmed. / October 2016

Small molecule hydrogen bond donors have emerged as versatile catalysts in asymmetric synthesis. Within this class, chiral BINOL phosphoric acid is regarded as one of the pioneer catalysts used in several asymmetric transformations. The ability of the catalyst to activate the substrates could be controlled in two different ways. (1) Dual activation/bifunctional activation of substrate by hydrogen bond interactions or ion pairing with phosphoric acid or (2) By forming chiral BINOL phosphate metal complex that could significantly alter the interactions in chiral space. In particular, chiral alkaline earth metal phosphate complexes have unique advantages as catalysts owing to the ubiquitous availability of alkaline earth metals, strong Brønsted basicity of their counterions, mild but significant Lewis acidity of the metal and their ability to coordinate at multiple reactive sites due to large ionic radius. Chapter 1 summarizes the recent development of alkaline earth metal complexes in asymmetric catalysis. My thesis dissertation is focused on the application of chiral alkaline earth metal phosphate complexes in novel asymmetric reactions. In Chapter 2, we disclosed an efficient asymmetric one-pot synthesis of chiral 1,3-oxazolidines and chiral 1,3-oxazinanes. Chiral oxazolidines and oxazinanes are widely used as auxiliaries in asymmetric transition metal catalysis and also key structural motifs in natural products with biological activities. We developed a new synthetic method for chiral 1,3-oxazolidines which follows the enantioselective addition of alcohols to imines catalyzed by chiral 3,3’-(triisopropylphenyl)-derived BINOL magnesium phosphate to form hemiaminal intermediate, which then undergoes mild base mediated intramolecular nucleophilic substitution to afford highly enantioselective 1,3-oxazolidines and 1,3-oxazinanes in good yields. In Chapter 3, we developed the first catalytic enantioselective desymmetrization process for the synthesis of novel axially chiral cyclohexylidene oxime ethers. Even though these molecules were found to be optically active in 1910, methods to synthesize these molecules are scarce. We have developed an efficient desymmetrization process of 4-phenyl cyclohexanones with phenoxyamines catalyzed by chiral BINOL strontium phosphate complex to afford highly enantioselective products. We then extended this methodology to the dynamic kinetic resolution of 2-substituted cyclohexanones to form chiral 2-substituted cyclohexyl oximes in good enantioselectivities, as demonstrated in Chapter 4. We further demonstrated the utility of these compounds by converting them to chiral 2-aryl cyclohexylamines which are important synthetic intermediates.

The main focus of the present work was the Ge-rich part of the binary Ba – Ge system, in which by inspecting the behavior of the clathrate-I Ba8Ge43 under pressure, several new phases were found. The new phases in this system have the following compositions: BaGe3 (with two modifications), BaGe5, BaGe5.5 and BaGe6, therefore they are quite close in composition range: 75% - ~85% at. Ge. Concerning the conditions required for the synthesis of each phase, several combinations of temperature and pressure were employed in order to find a stability range. It was possible to establish such a formation range for all phases. In some cases two phases were found for a given conditions and in many other cases three or more phases were found to coexist. Thus, the stability range of pressure and temperature for single phase formation turned out to be very narrow. By inspecting of some structural features, for instance the interatomic distances, it is found that the average of the Ge – Ge distances change in line with the composition, i.e. the shorter contacts belong to BaGe6 while the longer distances are present in BaGe3 (both modification). An opposite trend is observed for the calculated density of each phase (neglecting the tI32 form of BaGe3): the lower density is found for BaGe3 and the denser compound is found to be BaGe6. Of course this is not coincidence, since due to the Ge content, BaGe6 has the largest molar mass. Similarly, by examining the density as a function of the interatomic distance. In such case, the denser compound is characterized by shorter Ge – Ge contacts, while the less dense phase holds the longest Ge – Ge contacts. This is in agreement with the building motifs within each crystal structure: columns in BaGe3 (open framework) passing through layers in BaGe5, ending in a three-dimensional network (closed framework) in BaGe6.

The main focus of the present work was the Ge-rich part of the binary Ba – Ge system, in which by inspecting the behavior of the clathrate-I Ba8Ge43 under pressure, several new phases were found. The new phases in this system have the following compositions: BaGe3 (with two modifications), BaGe5, BaGe5.5 and BaGe6, therefore they are quite close in composition range: 75% - ~85% at. Ge. Concerning the conditions required for the synthesis of each phase, several combinations of temperature and pressure were employed in order to find a stability range. It was possible to establish such a formation range for all phases. In some cases two phases were found for a given conditions and in many other cases three or more phases were found to coexist. Thus, the stability range of pressure and temperature for single phase formation turned out to be very narrow. By inspecting of some structural features, for instance the interatomic distances, it is found that the average of the Ge – Ge distances change in line with the composition, i.e. the shorter contacts belong to BaGe6 while the longer distances are present in BaGe3 (both modification). An opposite trend is observed for the calculated density of each phase (neglecting the tI32 form of BaGe3): the lower density is found for BaGe3 and the denser compound is found to be BaGe6. Of course this is not coincidence, since due to the Ge content, BaGe6 has the largest molar mass. Similarly, by examining the density as a function of the interatomic distance. In such case, the denser compound is characterized by shorter Ge – Ge contacts, while the less dense phase holds the longest Ge – Ge contacts. This is in agreement with the building motifs within each crystal structure: columns in BaGe3 (open framework) passing through layers in BaGe5, ending in a three-dimensional network (closed framework) in BaGe6.