The task of automated joining of the shaft with clearance taking into account the spatial deviation of the grip was solved. Linear and angular initial values of non-coincidences when joining is still possible were obtained. The depth of shaft insertion, when the contact at second point occurs, and dependence on the inclination angle of the axis were determined.

The aim of this work was the analysis of air current from the right outlet, using the smoke method and the subsequent determination of a method for application. A further task was to establish a method for determining the upper and lower vertical routing, yaw angle (ß) and angle of inclination (?) of the air current. The experiment aims to approximate conditions as close to those experienced in the actual vehicle. After assembling a track with a soot blower (outlet) in the laboratory and defining the coordinates of the vehicle, the air current was subjected to visualization within the range of five positions of the vanes. Visualization was achieved by the use of technology for the smoke method. We used a light plane with a customized system of coordinates, a smoke generator for visualizing the air current being emitted and a camera for recording images. During our research we established the upper and lower cut off at the specific closures of the horizontal vanes of the soot blower. We determined a common analogy between the experimental track used in the experiment and the circumstances in the actual vehicle. We acquired the yaw angles (ß) and the angles of inclination (?) in the light plane and, after conversion, in the system of coordinates of the vehicle for all five settings of the vanes. The assessment of the given soot blower was undertaken according to the values achieved.

Goal of this master´s thesis is to experimentally analyse air jet from ventilation outlet of a passenger car dashboard using smoke visualization and to describe this air jet. Air flow was set at 30 m3/h according to requirements from Škoda Auto s.r.o. from previous experiments on a similar ventilation outlet. First type of measuring rig which was developed for previous experiments was disassembled and replaced with a new modern measuring rig which is supposed to be used for next visualizations and experiments. Visualization was performed using smoke method and laser light plane. Air jet was photographed for five defined ventilation outlet adjustments and that for a jet to free space and for a jet flowing along a wall. The wall represented a front left door of a car. Results were processed by computer and presented as pictures and tables. Resulting angles were transformed to the main coordinate system of a car. Ventilation outlet functionality with respect to the air distribution in a car was evaluated afterwards.