Tato diplomová práce se zabývá elektromagnetickou analýzou a modelováním asynchronního stroje s plným rotorem. Tato práce tedy zahrnuje literární rešerši na téma vysokootáčkových elektrických strojů s porovnáním s klasickými elektrickými stroji s převodovkou a popisem jejich výhod či nevýhod, rozdělení vysokootáčkových elektrických strojů s plnými rotory a srovnání jejich výhod či nevýhod, kde se tato práce nejvíce soustřeďuje na vysokootáčkové asynchronní stroje s plnými rotory a jejich použití v průmyslu. Dále se tato práce zabývá metodami výpočtu elektrických asynchronních strojů s plnými rotory. Proto jsou zde uvedeny a popsány metody výpočtu stroje mezi které patří analytické metody i metoda konečných prvků. Vzhledem k povaze elektrických strojů s plnými rotory je hlavně kladen důraz v této práci na výpočet stroje pomocí metody konečných prvků ve 2D prostoru s využitím korekčních činitelů konců plných rotorů, které jsou zde velmi detailně popsány a rozděleny. Na základě dostupné literatury je vypočítaný elektrický stroj s plným rotorem pomocí MKP analýzy. Elektromagnetický výpočet stroje je automatizován pomocí skriptu vytvořeného v Pythonu. Dalším hlavním cílem této práce je popis tzv. náhradních modelů, uvedení jejich výhod či nevýhod, použití v jiných průmyslových odvětvích a hlavně použití náhradních modelů na elektrický stroj s plným rotorem. S využitím náhradních modelů je dále optimalizovaný vybraný asynchronní stroj s plným rotorem a to pomocí programů SymSpace a Optimizer. Pro samotnou optimalizaci byly uvažovány 3 návrhy stroje, které byly na závěr mezi sebou porovnány a to hlavně z hlediska jejich elektromagnetického výkonu.

Aim of the thesis is to explain the issue of forces acting in circuit breaker caused by magnetic fields induced by short-circuit current. This thesis is focused on force affecting in concrete system of a circuit breaker. The given circuit breaker is made by OEZ Letohrad, the type Modeion BD250. In the thesis the way of creating 3-D model is shown for the purpose of creating numeric simulation by ANSYS 11. The next approach of the thesis is the description of applicating the results for DC and AC current calculations. The noted calculation is made in the programme MATLAB 6.5. The solutions are mentioned at calculations both in the graphic form and numeric specifications. Visualisation was made by using GIF graphic system animation. The individual pictures processing was done in the programme UNLEAD GIF ANIMATOR 5.

This thesis examines the magnetic field and magnetic flow at the end of the stator synchronous machine. This problem is solid using nonlinear magnetic resistive network, which is simulating by PSpice software. A simple model of stator, consisting of stator plates, air gaps and the two-thumbs, which hold the stator together. All of this is replace magnetic nonlinear resistive network, which is then divided into elements. According to these element is a simplified model solid and analyzed.

This master‘s thesis deals with problems of optimization of cooling in electrical machines. This work includes introduction to the theory of mathematical optimization and brief introduction to optimization problems. This thesis deals with using of program Ansys Workbench for the thermal analysis in electrical machines and optimization of their cooling. Thesis contains thermal analyse of specific asynchronous motor with the squirrel cage and optimization of its cooling.

The work is focusing on dynamic effects of short-circuit currents, more precisely dynamic effects of short-circuit currents on switchgear cabinet (terminal box). The work was designated to a concrete construction type of two switchgear cabinets located on rotating machines via company Siemens Electric Machines Drásov s.r.o.. The switchgear cabinets are designed for non-explosive environment where the air is used as an insulating medium. The task was to determine how the device will behave during the three-phase short-circuit and three-phase short-circuit with earth/ground connection. The following programs were used for the calculations and simulations: Ansoft Maxwell 16.0, Ansoft Maxwell 2015 and ANSYS Workbench 16.0. By using these programs the effects of forces which acts on current paths in cabinet caused by the passage of short-circuit current were simulated, statically and also dynamically. Further the effects of pressure acting on cabinet frame during the arc short-circuit have been statically and dynamically simulated. All the results are summarized in the conclusion. Conclusion also contains the final evaluation of the functionality of both switchgear cabinets.

The objective of this master's thesis is a design of suspension footbridge. The footbridge is suspended construction of stress ribbon by one span. The brick deck is supported on the edges and it is kept in a parabolic arc. The suspension cables are kept at two inclined levels. The model lengthways is implemented in the program ANSYS, by non-linear solution. The model crosswise is implemented in the program SCIA ENGINEER 2011. The design is according to relevant current standart.

Diploma thesis is focused on modeling rotor downwash generated by the main rotor of helicopter and analyzing its effects on the roof structure. Theoretical definition of rotor downwash flow is described in the first part of the text. Governing equations of computational fluid dynamics are briefly explained as well as boundary layer and finite volume method. Next part inquires into numerical simulation of rotor downwash based on height of rotor above the roof, shape of roof plane and climatic conditions. Results are compared with climatic load values provided by actual Czech construction standard in the end of the text.

Construction of structural computational model of the tank with fluid using program package ANSYS based on the Finite Element Method. Solve eigen-vibration of the tank with or without effects of fluid. Application of Euler and Lagrange method for modeling fluid. Solve seismic response using response spectra. Verify of the tank in accordance to EC 3 and EC8.

This thesis deals with static and dynamic analysis of an lookout tower construction. For dynamic analysis a computational model in ANSYS software is created. Static analysis is performed by Scia Engineer software. Both of this software use finite element method. It is also focused on wind load determination by Eurocode 1, structural factor calculation, modal analysis and vortex shedding. Verification of selected parts according to Eurocodes is included.

This thesis mainly deals with modeling and static analysis of the ceiling structure in the basic environment of ANSYS. The first part is focused on verifying correctness of the model most stressed parts of the structure with a simple hand-static calculation by the process of stress on a continuous beam. The main part is devoted to modeling composite structure, element types, specifying loads and boundary conditions by ANSYS FEM program. In the end, there are the results of stress and deflection presented, and the structure is evaluated at the ultimate limit state and serviceability limit state.