No description available.

Microwave imaging techniques have shown excellent capabilities in various fields such as civil engineering, nondestructive testing, industrial applications, and have in recent decades experienced strong growth as a research topic in biomedical diagnostics. Many research groups throughout the world work on prototype systems for producing images of human tissues in different biomedical applications, particularly breast tumor detection. However, the research community faces many challenges and in order to be competitive to other imaging modalities one of the means is to put emphasis on experimental work. Consequently, the use of flexible and accurate measurement systems, together with the design and fabrication of suitable antennas, are essential to the development of efficient microwave imaging systems. The first part of this thesis focuses on measurement systems for microwave imaging in terms of antenna design and development, robot controlled synthetic array geometries, permittivity measurements, and calibration. The aim was to investigate the feasibility of a flexible system for measuring the fields around an inhomogeneous object and to create quantitative images. Hence, such an aim requires solving of a nonlinear inverse scattering problem, which in turn requires accurate measurements for producing good quality experimental data. The presented solution by design of a flexible measurement system is validated by examination of microwave imaging from experimental data with a breast phantom. The second part of the thesis deals with the research challenges of designing high performance antennas to be placed in direct contact with or in close proximity to the imaged object. The need for novel antenna applicators is envisaged in the framework of the Mamacell measurement system, where the antenna applicators have to be designed and constructed to effectively couple the energy into the imaging object. For this purpose the main constraints and design requirements are a narrow lobe of the antenna, very small near-field effects, and small size. Numerical simulations and modeling shows that the proposed ridged waveguide antenna is capable of fulfilling the design requirements and the performance goals, demonstrating the potential for the future microwave imaging system called Mamacell.

No description available.

This study investigated the delivery of electron arc treatment with a trapezoidal aperture. The aim of the investigation is to reduce the nonuniformity of the dose distribution, which is caused by the variation of the patient contour from superior to inferior. The characteristics of static electron beam were first investigated. Then a measurement-based algorithm was developed and implemented as a computer program called EarcMU to calculate the monitor units required for delivering the prescribed dose with a trapezoidal aperture. The central axis percentage depth dose was found to be independent of source-to-surface distance (SSD) and the width of the aperture. The inplane profiles of a trapezoidal aperture show that the dose decreases longitudinally from the wide to the narrow end of the trapezoidal aperture. The EarcMU program was verified using two cylindrical water phantoms. The measured dose and the dose calculated by the program agreed within 2.1% in the typical clinical conditions. A simple method was also proposed for determining the trapezoidal aperture for an individual patient. Under the same conditions, the trapezoidal apertures calculated by this method along with the open aperture were used to deliver treatments to several conical phantoms. Significant improvement in the uniformity of dose distribution was observed. On average, the flatness index of the longitudinal dose distribution from superior to inferior decreases dramatically from 8% for open aperture down to 0.58% for trapezoidal aperture. The results are clinically significant, indicating that delivering the electron arc treatment using a trapezoidal aperture can bring more uniform dose to the patient regardless of the change of patient contour from superior to inferior.

44 pp. / Updated December 15, 2003

Interstitial and intracavitary brachytherapy plays an essential role in management of several malignancies. However, the achievable accuracy of brachytherapy treatment for prostate and cervical cancer is limited due to the lack of intraoperative planning and adaptive replanning. A major problem in implementing TRUS-based intraoperative planning is an inability of TRUS to accurately localize individual seed poses (positions and orientations) relative to the prostate volume during or after the implantation. For the locally advanced cervical cancer patient, manual drawing of the source positions on orthogonal films can not localize the full 3D intracavitary brachytherapy (ICB) applicator geometry. A new iterative forward projection matching (IFPM) algorithm can explicitly localize each individual seed/applicator by iteratively matching computed projections of the post-implant patient with the measured projections. This thesis describes adaptation and implementation of a novel IFPM algorithm that addresses hitherto unsolved problems in localization of brachytherapy seeds and applicators. The prototype implementation of 3-parameter point-seed IFPM algorithm was experimentally validated using a set of a few cone-beam CT (CBCT) projections of both the phantom and post-implant patient’s datasets. Geometric uncertainty due to gantry angle inaccuracy was incorporated. After this, IFPM algorithm was extended to 5-parameter elongated line-seed model which automatically reconstructs individual seed orientation as well as position. The accuracy of this algorithm was tested using both the synthetic-measured projections of clinically-realistic Model-6711 125I seed arrangements and measured projections of an in-house precision-machined prostate implant phantom that allows the orientations and locations of up to 100 seeds to be set to known values. The seed reconstruction error for simulation was less than 0.6 mm/3o. For the physical phantom experiments, IFPM absolute accuracy for position, polar angle, and azimuthal angel were (0.78 ± 0.57) mm, (5.8 ± 4.8)o, and (6.8 ± 4.0)o, respectively. It avoids the need to match corresponding seeds in each projection and accommodates incomplete data, overlapping seed clusters, and highly-migrated seeds. IFPM was further generalized from 5-parameter to 6-parameter model which was needed to reconstruct 3D pose of arbitrary-shape applicators. The voxelized 3D model of the applicator was obtained from external complex combinatorial geometric modeling. It is then integrated into the forward projection matching method for computing the 2D projections of the 3D ICB applicators, iteratively. The applicator reconstruction error for simulation was about 0.5 mm/2o. The residual 2D registration error (positional difference) between computed and actual measured applicator images was less than 1 mm for the intrauterine tandem and about 1.5 mm for the bilateral colpostats in each detector plane. By localizing the applicator’s internal structure and the sources, the effect of intra and inter-applicator attenuation can be included in the resultant dose distribution and CBCT metal streaking artifact mitigation. The localization accuracy of better than 1 mm and 6o has the potential to support more accurate Monte Carlo-based or 2D TG-43 dose calculations in clinical practice. It is hoped the clinical implementation of IFPM approach to localize elongated line-seed/applicator for intraoperative brachytherapy planning may have a positive impact on the treatment of prostate and cervical cancers.

<p>Since 1986 patients with ocular malignant melanoma have been treated with Ru-106 plaques at S:t Erik Eye Hospital. In 1998 I-125 radioactive seed plaques was presented as an alternative to Ru-106 when treating tumors with an apical height greater than 7 mm. Until June 2005 the doseplanning of these plaques was based on a depth-dose curve made in the dose planning system Cadplan supplied by Varian Medical Systems. In the recent years the capabilities of computerized 3D dose planning system has increased greatly. The number of types of seeds on the market has also increased.</p><p>In order to implement the modern 3D dose planning system Brachy Vision 7.3.10 in planning the I-125 plaques, a review of the dose planning process have been done.</p><p>The ultra sound equipment used by the ophthalmologist to determine the apical height of the tumor has been investigated in terms of accuracy. A phantom has been developed for this task.</p><p>As new seeds entered the market a comparision have been made comparing the Amersham 6711 seed with the Bebig I25.S06 seed. A method for measuring the activity of the single seeds has also been developed.</p><p>The dose planning system Brachy Vision 7.3.10 have been compared to the old dose planning method, and an implementation of the plaques into Brachy Vision have been made.</p><p>The ultra sound equipment was accurate in the regions of interest. It was also discovered that the Bebig I25.S06 seed gave slightly higher dose compared to the Amersham 6711 with the same activity. The difference between the seeds is however small. The results indicate that the old dose planning method gave a slight underdosage.</p>

Since 1986 patients with ocular malignant melanoma have been treated with Ru-106 plaques at S:t Erik Eye Hospital. In 1998 I-125 radioactive seed plaques was presented as an alternative to Ru-106 when treating tumors with an apical height greater than 7 mm. Until June 2005 the doseplanning of these plaques was based on a depth-dose curve made in the dose planning system Cadplan supplied by Varian Medical Systems. In the recent years the capabilities of computerized 3D dose planning system has increased greatly. The number of types of seeds on the market has also increased. In order to implement the modern 3D dose planning system Brachy Vision 7.3.10 in planning the I-125 plaques, a review of the dose planning process have been done. The ultra sound equipment used by the ophthalmologist to determine the apical height of the tumor has been investigated in terms of accuracy. A phantom has been developed for this task. As new seeds entered the market a comparision have been made comparing the Amersham 6711 seed with the Bebig I25.S06 seed. A method for measuring the activity of the single seeds has also been developed. The dose planning system Brachy Vision 7.3.10 have been compared to the old dose planning method, and an implementation of the plaques into Brachy Vision have been made. The ultra sound equipment was accurate in the regions of interest. It was also discovered that the Bebig I25.S06 seed gave slightly higher dose compared to the Amersham 6711 with the same activity. The difference between the seeds is however small. The results indicate that the old dose planning method gave a slight underdosage.

This study investigated the delivery of electron arc treatment with a trapezoidal aperture. The aim of the investigation is to reduce the nonuniformity of the dose distribution, which is caused by the variation of the patient contour from superior to inferior. The characteristics of static electron beam were first investigated. Then a measurement-based algorithm was developed and implemented as a computer program called EarcMU to calculate the monitor units required for delivering the prescribed dose with a trapezoidal aperture. The central axis percentage depth dose was found to be independent of source-to-surface distance (SSD) and the width of the aperture. The inplane profiles of a trapezoidal aperture show that the dose decreases longitudinally from the wide to the narrow end of the trapezoidal aperture. The EarcMU program was verified using two cylindrical water phantoms. The measured dose and the dose calculated by the program agreed within 2.1% in the typical clinical conditions. A simple method was also proposed for determining the trapezoidal aperture for an individual patient. Under the same conditions, the trapezoidal apertures calculated by this method along with the open aperture were used to deliver treatments to several conical phantoms. Significant improvement in the uniformity of dose distribution was observed. On average, the flatness index of the longitudinal dose distribution from superior to inferior decreases dramatically from 8% for open aperture down to 0.58% for trapezoidal aperture. The results are clinically significant, indicating that delivering the electron arc treatment using a trapezoidal aperture can bring more uniform dose to the patient regardless of the change of patient contour from superior to inferior.

Master of Science / Department of Apparel, Textiles, and Interior Design / Minyoung Suh / The purpose of this study was to explore printed antennas as an alternative technique for applying hyperthermia treatment. The antenna consisted of a printed ground plane and a thin copper plate. The ground plane was made of silver conductive ink printed on a flexible substrate. The challenge of the printed ground plane was limited conductivity. Multi-layer printing was one of the ways to increase the conductivity of the printed trace. This study examined whether the multiple-layered printings on the ground plane influence the performance of the antenna. The ground plane printed on a flexible substrate was evaluated for its conductivity and capacity to handle the heat energy for the extended time duration at the elevated temperature. This research was conducted in two experimental stages. The first stage of the experiment was designed to test conductivity of the ground plane. Ground planes were printed on a 32.5 mm × 17.0 mm substrate. The thickness and resistance of up to five layers of conductive printing were tested to verify how repeated printing improved the resistance and resistivity. Results showed that the multi-layering technique reduced the resistance of the printed trace, but statistically, the ground plane had no significant improvement in resistance beyond the triple layer printing. With an increase of the thickness, resistivity rather increased after the triple layer printing. The second stage of the experiment was used to assess the performance of the entire antenna. Antennas were fabricated using ground planes with triple and quintuple layers based on resistance and resistivity measurements. The antennas showed an acceptable level of performance in terms of antenna return loss and temperature elevation. The statistical analysis of return loss, power handling capability over the time, and temperature elevation was not significant among the antennas with triple and quintuple layered ground planes. Antennas were able to achieve 42 ˚C within 10 minutes at a 2cm deep location with the return loss of -13.76 dB. Most importantly, experimental results showed that antennas were able to handle 15 watt power without degrading the antenna performance. The antenna showed a successful performance in power handling and reaching the tumor temperature.