<p>Capillary electrophoresis (CE) is an analytical technique that is very useful for investigating processes that modify the charge and mass of proteins and polypeptide pharmaceuticals. This report explores the ability of CE to determine the aggregation constant between insulin molecules. Bovine insulin is a polypeptide (Mw=5733, pI = 5.3) that has two α-amino groups (Gly and Phe) and one ε–amino group (Lys). Analysis of concentration dependence of electrophoretic mobility of insulin at different conditions yields the association constant for dimerization of insulin. The association constant estimates how tight the peptide molecules are associated. The association constant is a useful factor to evaluate the purity of a peptide or protein sample.</p><p>The association reaction of bovine insulin molecules was found to be favoured by temperature. The association constants were 7200 M -1, 8000 M -1, and 36000 M -1 at 15 oC, 25 oC and 35 oC, respectively. The interactions between the peptide molecules increase at higher temperature, resulting in stronger association. The association constant was estimated to be 3000 M -1in the presence of dioxane (5%, w/v %) at 25 oC. However, the interaction sites remain to be explored.</p>

Capillary electrophoresis (CE) is an analytical technique that is very useful for investigating processes that modify the charge and mass of proteins and polypeptide pharmaceuticals. This report explores the ability of CE to determine the aggregation constant between insulin molecules. Bovine insulin is a polypeptide (Mw=5733, pI = 5.3) that has two α-amino groups (Gly and Phe) and one ε–amino group (Lys). Analysis of concentration dependence of electrophoretic mobility of insulin at different conditions yields the association constant for dimerization of insulin. The association constant estimates how tight the peptide molecules are associated. The association constant is a useful factor to evaluate the purity of a peptide or protein sample. The association reaction of bovine insulin molecules was found to be favoured by temperature. The association constants were 7200 M -1, 8000 M -1, and 36000 M -1 at 15 oC, 25 oC and 35 oC, respectively. The interactions between the peptide molecules increase at higher temperature, resulting in stronger association. The association constant was estimated to be 3000 M -1in the presence of dioxane (5%, w/v %) at 25 oC. However, the interaction sites remain to be explored.

Supramolecular host-guest chemistry is a topic of great current interest. However, the further development of host-guest chemistry is still limited by the number of available host-guest recognition motifs. This makes it necessary and valuable to find new host-guest recognition motifs and apply known host-guest recognition motifs in the preparation of novel supramolecular systems. By comparing the crystal structures of the host and its taco complex, we proved that folding is a necessary step during the formation of taco complexes. Based on the known bis(m-phenylene)-32-crown-10/paraquat recognition motif, the first solid-state supramolecular poly(taco complex) was prepared. We demonstrate not only that bis(m-phenylene)-32-crown-10-based cryptands are powerful hosts for paraquat derivatives compared with the simple crown ether, but also that cooperative complexation can be obtained with the cryptand structure. It was shown that the significant improvement in complexation was the result of the combination of the preorganization of the cryptand hosts and the introduction of additional and optimized binding sites. Furthermore, it was demonstrated that improved complexation of bis(secondary ammonium) and bisparaquat salts could also be achieved by the formation of the pseudocryptand structure. We also prepared two dimers of inclusion cryptand/paraquat complexes driven by dipole-dipole and face-to-face p-stacking interactions. An interesting complex based on dibenzo-24-crown-10 and diquat was prepared. In its crystal structure the diquat guest lies in the concave cavity provided by two dibenzo-24-crown-8 hosts. Monopyridinium-based [2]- and [3]-pseudorotaxanes were prepared based on the newly discovered bis(m-phenylene)-32-crown-10/monopyridinium salt and cryptand/monopyridinium salt recognition motifs. Inspired by the formation of solid-state taco complexes between bis(m-phenylene)-32-crown-10 and paraquat derivatives, we designed and synthesized the first cylindrical bis(crown ether) host for paraquat derivatives and studied its complexation with paraquat. We prepared three slow-exchange C3-symmetric inclusion complexes based on a newly discovered cryptand/trispyridinium recognition motif, in which 1,3,5-trispyridiniumbenzene salts act as guests. Finally the application of several new and known recognition motifs in the preparation of a supramolecular poly[3]pseudrotaxane, and the first pseudorotaxane-type supramolecular star-shaped polymer, and the first supramolecular hyperbranched polymer was discussed. / Ph. D.

The research presented in this thesis focused on pseudorotaxanes and supramolecular polymers based on a new recognition motif, the dibenzo-24-crown-8/paraquat recognition motif. Main kinds of pseudorotaxanes and rotaxanes and various protocols used for the study of them were discussed first. By preparation and characterization of a series of pesudorotaxanes based on DB24C8 and paraquat derivatives, it was found that these complexes were stabilized by N+...O interactions, C-H...O hydrogen bonding, and face-to-face p-stacking interactions. Because methyl protons of paraquat are involved in hydrogen bonding to the host, the substitution of any methyl hydrogen on paraquat causes apparent association constant of the pseudorotaxane to decrease. The concentration dependence of apparent association constants, Ka,exp, of fast exchange host-guest systems was studied for the first time by using complexes based on viologens and crown ethers as examples. While the bis(hexafluorophosphate) salts of paraquat derivatives are predominantly ion paired in acetone (and other low dielectric constant solvents presumably) the complex based on dibenzo-24-crown-8 and paraquat is not ion paired in solution, resulting in concentration dependence of Ka,exp. However, four complexes of two different bis(m-phenylene)-32-crown-10 (BMP32C10) derivatives and bis(p-phenylene)-34-crown-10 (BPP3C10) with viologens are ion paired in solution, as shown by the fact that Ka,exp is not concentration dependent for these systems involving hosts with freer access to bound guests. X-ray crystal structures support these soluton-based assessments in that there is clearly ion pairing of the cationic guest and its PF6- counterions in the solid states of the latter four examples, but not in the former. The complexes based on the new dibenzo-24-crown-8/paraquat recognition motif are thus different from the complexes based on two old recognition motifs: the BPP34C10/BMP32C10-paraquat and DB24C8-ammonium motives. In order to compare these recognition motives further, the selectivity between two hosts, DB24C8 and BPP34C10, and two guests, dimethyl paraquat and dibenzyl ammnonium salt, was discussed. By individual and competitive complexation studies, it was demonstrated that DB24C8 is a better host than BPP34C10 for paraquat, and that paraquat is a better guest than dibenzyl ammonium salt for DB24C8. Finally the DB24C8-paraquat recognition motif was successfully applied in the preparation the first star-shaped supramolecular polymer based on a tetraparaquat guest and a DB24C8 functionalized polystyrene oligomer. A model system based on this guest and DB24C8 was also studied for comparison. It was found that the complexation in these two systems is cooperative, as are most biological complexations of multitopic species. Due to the ready availability of DB24C8 and paraquat derivatives, the new recognition motif should prove to be very valuable for self-assembly of other more sophisticated supramolecular systems. / Master of Science

Lors de la dégustation d’un vin, les tannins sont responsables de deux propriétés gustatives, l’amertume et l’astringence, respectivement dues à des associations avec les protéines salivaires et les récepteurs au goût amer. Néanmoins, leurs intensités perçues en bouche vont dépendre de multiples facteurs, notamment la présence de molécules externes aux complexes tannin-protéine tel que les lipides, qu’ils soient situés au niveau des membranes buccales ou issus de l’alimentation. L’objectif de cette thèse a ainsi été d’examiner l’impact des lipides sur ces sensations organoleptiques. Pour ce faire, cette étude, réalisée principalement par RMN, s’est intéressée aux interactions tannin-lipide sur des modèles de membranes buccales et d’émulsions de gouttelettes lipidiques. Nous avons pu alors étudier l’interaction tannin-lipide en termes de localisation, d’affinité et de dynamique. Nos résultats montrent dans un premier temps une localisation du tannin à l’interface de tous les modèles utilisés. En outre, l’insertion de tannins au niveau des vésicules multilamellaires, modèle utilisé pour mimer les membranes buccales, entraîne une fluidification de ce système lipidique. Il a été montré que cet effet fluidifiant dépend de la structure du tannin, de la présence d’éthanol et de la teneur en cholestérol du système lipidique. Enfin, un protocole permettant d’obtenir les constantes d’associations tannin-lipide par RMN a été établi. Ces dernières se sont révélées du même ordre de grandeur que celles relatives aux interactions tannin-protéine salivaire. Ces résultats montrent que les lipides auraient une influence d’une part sur l’astringence via une compétition entre les interactions tannin-lipide et les interactions tannin-protéines salivaires et d’autre part sur l’amertume en perturbant la dynamique de la membrane, ce qui pourrait induire une perturbation des récepteurs gustatifs. / When tasting a wine, tannins are responsible of two gustative properties, bitterness and astringency, respectively due to association between tannins and salivary proteins or bitter receptors. However, perceived intensities depend on several factors, including the presence of external molecules such as lipids, either located in the buccal membranes or from food. The main objective of this thesis was to study the effect of lipids on these two organoleptic properties. For that, this study, carried out mainly by NMR, is interested in tannin-lipid interaction using several models of buccal membranes and lipid droplets. We have studied these interactions in terms of localization, affinity and dynamics. Our results show a localization of tannins at the interface of all studied lipid models. Then, the insertion of tannins in multilamellar vesicles, used to mimic buccal membranes, causes a fluidification effect on these systems. This effect depends on the structure of the tannin, the presence of ethanol and the cholesterol content of the lipid system. Finally, a protocol to determine the tannin-lipid association constants was developed. The latter have proved to be in the same order of magnitude as those for tannin-salivary protein interaction. These results show that lipids could have an influence on the one hand on astringency, due to the competition between tannin-lipid interaction and tannin-salivary protein interaction, and on the other hand on bitterness due to the disturbance of the buccal membrane dynamics, which could induce a disturbance of the gustative receptors.

Design and preparation of novel host/guest systems, such as pseudorotaxanes, semirotaxanes, rotaxanes and catenanes, with high association constants, enhanced yields and the abilities to respond to external stimuli are of great importance and significance due to their topological novelty and potential application. The convergence of supramolecular chemistry with polymer science provides an important way to extend the scope of polymer and material sciences by incorporating designed host/guest systems into polymers, and the resulting non-covalently linked supramolecular polymers are expected to have unusual properties due to their unique architectures compared with traditional polymers. After discovery of bis(meta-phenylene)-32-crown-10 (BMP32C10) derivative/paraquat complexes, for about a quarter century only “taco”-shaped complexes were observed by X-ray crystallography. Here, by the self-assembly of a BMP32C10 bearing two electron-donating groups (carbazoles) with electron-accepting paraquat derivatives, the first [2]pseudorotaxane and the first pseudocryptand-type poly[2]pseudorotaxane based on BMP32C10 were isolated as crystalline solids as shown by X-ray analyses. The first dual component pseudocryptand-type [2]pseudorotaxanes were designed and prepared via the self-assembly of synthetically easily accessible BMP32C10 pyridyl, quinolyl and naphthyridyl derivatives with paraquat. The formation of the pseudocryptand structures in the complexes remarkably improved the association constants by forming the third pseudo-bridge via H-bonding with the guest and π-stacking of the heterocyclic units. A pseudocryptand-type [2]pseudorotaxane was formed via the self-assembly of a dipyridyl BMP32C10 derivative and a paraquat derivative. Due to the basicity of the pyridyl group, which forms the third pseudo-bridge of the pseudocryptand, this pseudorotaxane represents the first system with acid-base adjustable association constants, i. e., finite both under acidic and neutral conditions. The first pseudocryptand-type supramolecular [3]pseudorotaxane was designed and prepared via the self-assembly of a bispicolinate BMP32C10 derivative and a bisparaquat. The complexation behavior was cooperative. In addition, the complex comprised of the BMP32C10 derivative and a cyclic bisparaquat demonstrated strong binding; interestingly, a poly[2]pseudocatenane structure was formed in the solid state for the first time. Two novel BMP32C10 cryptands, bearing covalent and metal complex linkages, were designed and prepared. By employing the self-assembly of these biscryptands, which can be viewed as AA monomers, and a bisparaquat, which can be viewed as a BB monomer, the first AA/BB-type linear supramolecular polymers with relatively high molecular weights were successfully prepared. Via the self-assembly of two BMP32C10-based cryptands, bearing covalent and metal complex (ferrocene) linkages, with dimethyl paraquat, novel [3]pseudorotaxanes were formed statistically and anticooperatively, respectively. From a hydroxyl-functionalized secondary ammonium salt a [2]semirotaxane and a [2]rotaxane were prepared successfully with dibenzo-24-crown-8 (DB24C8). X-ray analysis of a single crystal of the [2]semirotaxane confirmed its semirotaxane nature. In addition, the formation of the [2]semirotaxane can be reversibly controlled by adding KPF6 and 18C6 sequentially. This system affords a way to prepare novel supramolecular polymers. Dibenzo-30-crown-10 (DB30C10) derivatives and pyridine-based DB30C10 cryptands were prepared by employing the templating method established by our group. A [2]pseudorotaxane was prepared based on DB30C10 diol and paraquat diol. The [3]pseudorotaxane formed via the self-assembly between DB30C10 cryptand and bisparaquat diol occurred in a cooperative manner. In addition, a bromo-functionalized DB30C10 cryptand was successfully designed and prepared. An alkyne-functionalized DB30C10 cryptand was designed and is under preparation; its precursors have been prepared successfully. In the future, based on these functionalized cryptands and paraquat salts, AA and AB type monomers will be prepared. Via the self-assembly between these monomers, non-covalent supramolecular polymers with high molecular weight will be afforded. A novel DB30C10 cryptand bearing an organometallic bridge, ferrocene, was prepared via 1-(3'-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDCI) coupling of the crown ether diol with ferrocene dicarboxylic acid. The cryptand is dimerized in the solid state via π, π-stacking and hydrogen bonds. The ferrocene-based cryptand formed novel [2]pseudorotaxanes with paraquat and diquat PF₆ salts with association constants (Kₐ) of 1.7 ± 0.1 x 10³ and 4.2 ± 0.3 x 10⁴ M⁻¹ in acetone-d₆, respectively. In order to prepare linear polycatenanes, the preparation of which represent a real synthetic challenge, a series phenanthroline derivatives were designed and prepared. A “U” shaped monomer was successfully prepared in relative high yield with good solubility. In the future, real linear polycatenanes will be prepared. In addition, a novel diphenanthroline-based BMP32C10 derivative was prepared in high yield and the complexation behavior between it and dimethyl paraquat was studied. / Ph. D.

This study aims at tackling some of the problems often encountered in photostability testing and liquid formulation development. Three anti-cancer drugs will be employed as models; Dacarbazine (DBZ) has well established photostability issues, Axitinib (AXI) and Sunitinib (SUT) are two new drugs only commercially available in solid dosage forms. In ethanol, the photokinetics of these drugs were well described by the newly proposed Φ-order kinetic mathematical model. This has confirmed the photoreversible character of AXI and SUT’s and unimolecular photoreaction of DBZ’s photodegradations. Also, the Φ-order kinetics is proven to describe them better than the usually used classic thermal reaction orders. In aqueous solution, the drugs were found to undergo thermal and photochemical complex degradations, involving at least 3 photoproducts. A new photokinetic approach has been proposed in this work to solving and unravelling the attributes of such complex mechanisms. For the first time, the quantum yields (QY) of the three drugs were determined and found to increase with irradiation wavelength. SUT’s QY were comparable in ethanol and water (QY460 = 0.02), DBZ was found to be more photoefficient in water (QY330 = 0.04 and 0.1, respectively) and AXI in water (QY330 = 0.06 and 0.03). Φ-order kinetics’ potential for the development of reliable actinometers of the three drugs, without prior knowledge of unknown reaction parameters, has also been established. A general equation to describe the isotherm of a (Gn:Hm) guest-host multicomponent complex was proposed in this work to palliate the lack of a strategy for characterising nanosponge-drug complexes. It provides information on both stiochiometry and association constant of the complex. The results indicate that hydrophobic AXI forms a 1:0.8 complex, indicating the possibility of multiple association sites and/or different types of binding. The newly developed AXI/nanosponge liquid formulation has significantly increased solubility (5000-fold) and thermal stability. Furthermore, the photostability of DBZ and SUT were considerably improved by using a strategy based on light-absorption competitors. Their initial velocities reduced from 10 and 3 s-1 (respectively) to 1 and 0.13 s-1. The successful application of these methods to the model anti-cancer drugs has set out new approaches that might be found useful for future treatments of photodegradation data, development of drug-actinometers and liquid formulations of drugs.

Les nucléolipides sont des molécules amphiphiles dont la structure bio-inspirée dérive de celle des acides nucléiques. Leur auto-assemblage en milieu aqueux aboutit à la formation d’objets supramoléculaires de morphologies et structures très diverses. La morphologie a été caractérisée par des techniques complémentaires de microscopie optique et de diffusion de la lumière, tandis que leur structure a été déterminée par la diffusion des rayons X. Il a ainsi été mis en évidence l’existence et le rôle fondamental des interactions faibles entre têtes polaires, au sein des auto-assemblages. La nature de ces interactions faibles a été déterminée par des techniques de spectroscopies IR et UV. Un premier objectif a été de mettre en évidence l’importance de ces interactions, ainsi que leur corrélation avec d’autres facteurs qui régissent le mécanisme d’auto-assemblage, tels que la nature chimique des amphiphiles, ou la morphologie et la structure des objets supramoléculaires en présence.Par ailleurs, la tête polaire nucléotide permet également d’imaginer la formation d’interactions faibles entre les auto-assemblages et un monobrin d’acide nucléique, à l’image des interactions spécifiques entre bases azotées présentes dans l’ADN. Lors de ce travail, nous nous sommes intéressés à une méthode de vectorisation d’acides nucléiques par des objets eux aussi chargés négativement. Contrairement aux approches classiques, l’interaction électrostatique est ici défavorable et l’association repose alors uniquement sur des interactions faibles spécifiques, estimées en spectroscopie. De façon surprenante, la formation des complexes a pu être mise en évidence par des expériences de diffraction des rayons X et un modèle approprié a permis de proposer des mécanismes de formation des complexes. Les propriétés thermodynamiques des différents complexes formés ont été évaluées par la technique de Calorimétrie à Titration Isotherme (ITC). Un point remarquable a été la mise en évidence systématique de trois types de comportements sur l’ensemble des complexes étudiés en fonction de la nature et de la spécificité des interactions mises en jeu. Ceci nous a ainsi permis de proposer différents mécanismes de formation pour chaque type de complexe observé. / Nucleolipids are amphiphilic molecules which bio-inspired structure derives from nucleic acid structure. Their self-assembling behaviour in aqueous medium leads to the formation of supramolecular objects of very different morphologies and structures. The morphology has been characterized with optical microscopy and light scattering complementary techniques, whereas their structure has been determined with X-ray scattering. Thus the existence and the fondamental role of weak interactions between polar heads inside the self-assemblies have been highlighted. The nature of these weak interactions has been determined with IR and UV spectroscopies techniques. A first objectif has been to highlight the importance of these interactions, as well as the their correlation with other factors which drive the mechanism of self-assembly, such as the chemical nature of amphiphiles or the morphology and structure of the supramolecular objects.Moreover the nucleotide polar hear also allows to imagine the formation of weak interactions between the self-assemblies and a single-stranded nucleic acid, such as those highlighted in DNA. In this work, we found interest in a nucleic acid vectorisation method with negatively charged objects as well. On the contrary of classic approaches, electrostatic interaction was here defavorable and assembling relies only on specific weak interactions, estimated with spectroscopy methods. Surprisingly, complexes formation could be highlighted with X-ray scattering experiments, and an appropriate model has allowed the proposal of mechanisms for the formation of complexes. Thermodynamic properties of the different complexes formed have been evaluated with Isothermal Titration Calorimetry (ITC) technique. A remarkable point was the systematic highlighting of three types of behaviour on the whole set of complexes studied, depending of the nature and the specificity of the weak interactions implied. This led us to different proposals for the mechanism of formation of each type of complex studied.