In this study, polypyrrole (PPy) prepared by chemical and electrochemical polymerization was investigated as the electrode of electrochemical supercapacitor (ES). New strategies were developed for the fabrication of nano-structured PPy and PPy based nano-composites, which included discovery of advanced anionic dopants and multi-functional nano-crystals, and development of co-dispersing agents. These methods improved the capacitive performance and cycle stability of PPy electrodes. The results indicated that high material loading and good capacitance retention of PPy was achieved using an electrochemical polymerization method and Ni plaque as the current collectors. Nano-crystalline (CTA)2S2O8 formed by a chemical precipitation method from solutions, containing anionic oxidant (S2O82-) and cationic surfactant (CTA+), could be used as the oxidant to synthesize PPy nano-fibers. We demonstrated that multi-wall carbon nanotubes (MWCNT) can be efficiently dispersed using such nano-crystals. Application of multi-functional nano-crystals is a conceptually new approach for the fabrication PPy coated MWCNT. Moreover, safranin and malachite green were found as universal dispersing and charging agents for cataphoretic deposition of graphene, MWCNT and PPy nano-fibers. It opens new strategies in colloidal and electrochemical processing of PPy nano-composites for ES electrodes. PPy coated MWCNT, prepared by the multi-functional nano-crystals (CTA)2S2O8, was employed for the fabrication of N-doped activated carbon-coated MWCNT (N-AC-MWCNT). The obtained N-AC-MWCNT was uniformly coated and possessed with high surface area. The use of N-AC-MWCNT enabled the fabrication of ES electrodes with high mass loading and high active material to current collector mass ratio. Symmetric and asymmetric ES cells, fabricated by N-AC-MWCNT and aqueous Na2SO4 electrolyte, showed high specific capacitance, good capacitance retention and large voltage window. The positive electrode of asymmetric ES, MnO2 coated MWCNT, was successfully prepared by the chemical reaction between KMnO4 and N-AC-MWCNT. The problem of degradation of MWCNT was avoided by the use of N-AC as the sacrificial carbon. Significant progress on ES technology has allowed for the development of capacitive dyes removal (CDR) methods using ES devices. In our study, porous carbon materials, N-doped activated carbon coated MWCNT (N-AC-MWCNT) and N-doped activated carbon nano-fibers (N-AC-NF), were developed as the electrodes for CDR applications. The experimental results indicated that capacitive performance of ES cells was influenced by the chemical structure, size, charge-to mass ratio, concentration and redox-active ligands of the dyes. CDR is a promising method for removal of various cationic and anionic dyes, which offers advantages of energy saving and simple electrode regeneration. / Thesis / Doctor of Philosophy (PhD)

This paper reports a novel and remarkably facile approach towards vertically aligned nanosheets on three-dimensional (3D) Ni foams. Conducting polypyrrole (PPy) sheets were grown on Ni foam through the volatilization of the environmentally friendly solvent from an ethanol–water solution of pyrrole (Py), followed by the polymerization of the coated Py in ammonium persulfate (APS) solution. The PPy-decorated Ni foams and commercial activated carbon (AC) modified Ni foams were employed as the two electrodes for the assembly of flexible all-solid-state asymmetric supercapacitors. The sheet-like structure of PPy and the macroporous feature of the Ni foam, which render large electrode–electrolyte interfaces, resulted in good capacitive performance of the supercapacitors. Moreover, a high energy density of ca. 14 Wh kg−1 and a high power density of 6.2 kW kg−1 were achieved for the all-solid-state asymmetric supercapacitors due to the wide cell voltage window.

This paper reports a novel and remarkably facile approach towards vertically aligned nanosheets on three-dimensional (3D) Ni foams. Conducting polypyrrole (PPy) sheets were grown on Ni foam through the volatilization of the environmentally friendly solvent from an ethanol–water solution of pyrrole (Py), followed by the polymerization of the coated Py in ammonium persulfate (APS) solution. The PPy-decorated Ni foams and commercial activated carbon (AC) modified Ni foams were employed as the two electrodes for the assembly of flexible all-solid-state asymmetric supercapacitors. The sheet-like structure of PPy and the macroporous feature of the Ni foam, which render large electrode–electrolyte interfaces, resulted in good capacitive performance of the supercapacitors. Moreover, a high energy density of ca. 14 Wh kg−1 and a high power density of 6.2 kW kg−1 were achieved for the all-solid-state asymmetric supercapacitors due to the wide cell voltage window.