The specification of enterprise information systems using formal specification languages enables the formal verification of these systems. Reasoning about the properties of a formal specification is a tedious task that can be facilitated much through the use of an automated reasoner. However, set theory is a corner stone of many formal specification languages and poses demanding challenges to automated reasoners. To this end a number of heuristics has been developed to aid the Otter theorem prover in finding short proofs for set-theoretic problems. This dissertation investigates the applicability of these heuristics to next generation theorem provers. / Computing / M.Sc. (Computer Science)

Programs have precise semantics, so we can use mathematical proof to establish their properties. These proofs are often too large to validate with the usual "social process" of mathematics, so instead we create and check them with theorem-proving software. This software must be advanced enough to make the proof process tractable, but this very sophistication casts doubt upon the whole enterprise: who verifies the verifier? We begin with a simple proof checker, Level 1, that only accepts proofs composed of the most primitive steps, like Instantiation and Cut. This program is so straightforward the ordinary, social process can establish its soundness and the consistency of the logical theory it implements (so we know theorems are "always true"). Next, we develop a series of increasingly capable proof checkers, Level 2, Level 3, etc. Each new proof checker accepts new kinds of proof steps which were not accepted in the previous levels. By taking advantage of these new proof steps, higher-level proofs can be written more concisely than lower-level proofs, and can take less time to construct and check. Our highest-level proof checker, Level 11, can be thought of as a simplified version of the ACL2 or NQTHM theorem provers. One contribution of this work is to show how such systems can be verified. To establish that the Level 11 proof checker can be trusted, we first use it, without trusting it, to prove the fidelity of every Level n to Level 1: whenever Level n accepts a proof of some phi, there exists a Level 1 proof of phi. We then mechanically translate the Level 11 proof for each Level n into a Level n - 1 proof---that is, we create a Level 1 proof of Level 2's fidelity, a Level 2 proof of Level 3's fidelity, and so on. This layering shows that each level can be trusted, and allows us to manage the sizes of these proofs. In this way, our system proves its own fidelity, and trusting Level 11 only requires us to trust Level 1. / text

This work is about diagrammatic languages, how they can be represented, and what they in turn can be used to represent. More specifically, it focuses on representations and applications of string diagrams. String diagrams are used to represent a collection of processes, depicted as "boxes" with multiple (typed) inputs and outputs, depicted as "wires". If we allow plugging input and output wires together, we can intuitively represent complex compositions of processes, formalised as morphisms in a monoidal category. While string diagrams are very intuitive, existing methods for defining them rigorously rely on topological notions that do not extend naturally to automated computation. The first major contribution of this dissertation is the introduction of a discretised version of a string diagram called a string graph. String graphs form a partial adhesive category, so they can be manipulated using double-pushout graph rewriting. Furthermore, we show how string graphs modulo a rewrite system can be used to construct free symmetric traced and compact closed categories on a monoidal signature. The second contribution is in the application of graphical languages to quantum information theory. We use a mixture of diagrammatic and algebraic techniques to prove a new classification result for strongly complementary observables. Namely, maximal sets of strongly complementary observables of dimension D must be of size no larger than 2, and are in 1-to-1 correspondence with the Abelian groups of order D. We also introduce a graphical language for multipartite entanglement and illustrate a simple graphical axiom that distinguishes the two maximally-entangled tripartite qubit states: GHZ and W. Notably, we illustrate how the algebraic structures induced by these operations correspond to the (partial) arithmetic operations of addition and multiplication on the complex projective line. The third contribution is a description of two software tools developed in part by the author to implement much of the theoretical content described here. The first tool is Quantomatic, a desktop application for building string graphs and graphical theories, as well as performing automated graph rewriting visually. The second is QuantoCoSy, which performs fully automated, model-driven theory creation using a procedure called conjecture synthesis.

In software engineering, software reuse has been a popular topic since 1968. Nowadays, Software Product Line (SPL) engineering promotes systematic reuse throughout the whole software development process. Within SPL, reusability strongly depends on variability. In this context, variability modelling and management are crucial activities that crosscuts all development stages. Different techniques are used to model variability and one of them is Feature Diagrams (FDs). FD languages are a family of popular modelling languages used to model, and reason on, variability. Since the seminal proposal of a FD language, namely FODA, many extensions have been proposed to improve it. However, the pros and cons of these languages are difficult to evaluate for two main reasons: (1) most of them are informally defined and (2) no well defined criteria were used to justify the extensions made to FODA. As a consequence, variability modelling and management techniques proposed in the literature or used by practitioners may be suboptimal. Globally, this work underlines that the current research on FDs is fragmented and provides principles to remedy this situation. A formal approach is proposed to introduce more rigour in the motivation, definition and comparison of FD languages. Thereby, examining their qualities should be more focused and productive. A formal approach guarantees unambiguity and is a prerequisite to define formal quality criteria and to produce efficient and safe tool automation. A quality analysis is necessary to avoid the proliferation of languages and constructs that are an additional source of misinterpretations and interoperability problems. The creation or selection of a FD language should be driven and motivated by rigourous criteria. Translations from one FD language to another should be defined and carefully studied to avoid interoperability problems. The main contributions of this work are: (1) to use a quality framework to serve as a roadmap to improve the quality of FD languages, (2) to formally evaluate and compare FD language qualities according to well-defined criteria and following a clear method, (3) to formally define and motivate a new FD language that obtains the best scoring according to the quality criteria and (4) to develop tool support for this language.

Beschreibungslogiken (Description logics, DLs) sind eine Klasse von Wissensrepraesentationsformalismen mit wohldefinierter, logik-basierter Semantik und entscheidbaren Schlussfolgerungsproblemen, wie z.B. dem Erfuellbarkeitsproblem. Zwei wichtige Entscheidungsverfahren fuer das Erfuellbarkeitsproblem von DL-Ausdruecken sind Tableau- und Automaten-basierte Algorithmen. Diese haben aufgrund ihrer unterschiedlichen Arbeitsweise komplementaere Eigenschaften: Tableau-Algorithmen eignen sich fuer Implementierungen und fuer den Nachweis von PSPACE- und NEXPTIME-Resultaten, waehrend Automaten sich besonders fuer EXPTIME-Resultate anbieten. Zudem ermoeglichen sie eine vom Standpunkt der Theorie aus elegantere Handhabung von unendlichen Strukturen, eignen sich aber wesentlich schlechter fuer eine Implementierung. Ziel der Dissertation ist es, die Gruende fuer diese Unterschiede zu analysieren und Moeglichkeiten aufzuzeigen, wie Eigenschaften von einem Ansatz auf den anderen uebertragen werden koennen, um so die positiven Eigenschaften von beiden Ansaetzen miteinander zu verbinden. Unter Anderem werden Methoden entwickelt, mit Hilfe von Automaten PSPACE-Resultate zu zeigen, und von einem Tableau-Algorithmus automatisch ein EXPTIME-Resultat abzuleiten. / Description Logics (DLs) are a family of knowledge representation languages with well-defined logic-based semantics and decidable inference problems, e.g. satisfiability. Two of the most widely used decision procedures for the satisfiability problem are tableau- and automata-based algorithms. Due to their different operation, these two classes have complementary properties: tableau algorithms are well-suited for implementation and for showing PSPACE and NEXPTIME complexity results, whereas automata algorithms are particularly useful for showing EXPTIME results. Additionally, they allow for an elegant handling of infinite structures, but they are not suited for implementation. The aim of this thesis is to analyse the reasons for these differences and to find ways of transferring properties between the two approaches in order to reconcile the positive properties of both. For this purpose, we develop methods that enable us to show PSPACE results with the help of automata and to automatically derive an EXPTIME result from a tableau algorithm.

This work focuses on the axiomatized relationships between different ontologies of varying levels of expressivity. Motivated by experiences in the decomposition of first-order logic ontologies, we partially decompose the Descriptive Ontology for Linguistic and Cognitive Engineering (DOLCE) into modules. By leveraging automated reasoning tools to semi-automatically verify the modules, we provide an account of the meta-theoretic relationships found between DOLCE and other existing ontologies. As well, we examine the composition process required to determine relationships between DOLCE modules and the Process Specification Language (PSL) ontology. Then, we propose an ontology based on the semantically-weak Computer Integrated Manufacturing Open System Architecture (CIMOSA) framework by augmenting its constructs with terminology found in PSL. Finally, we attempt to map two semantically-weak product ontologies together to analyze the applications of ontology mappings in e-commerce.

This work focuses on the axiomatized relationships between different ontologies of varying levels of expressivity. Motivated by experiences in the decomposition of first-order logic ontologies, we partially decompose the Descriptive Ontology for Linguistic and Cognitive Engineering (DOLCE) into modules. By leveraging automated reasoning tools to semi-automatically verify the modules, we provide an account of the meta-theoretic relationships found between DOLCE and other existing ontologies. As well, we examine the composition process required to determine relationships between DOLCE modules and the Process Specification Language (PSL) ontology. Then, we propose an ontology based on the semantically-weak Computer Integrated Manufacturing Open System Architecture (CIMOSA) framework by augmenting its constructs with terminology found in PSL. Finally, we attempt to map two semantically-weak product ontologies together to analyze the applications of ontology mappings in e-commerce.

The specification of enterprise information systems using formal specification languages enables the formal verification of these systems. Reasoning about the properties of a formal specification is a tedious task that can be facilitated much through the use of an automated reasoner. However, set theory is a corner stone of many formal specification languages and poses demanding challenges to automated reasoners. To this end a number of heuristics has been developed to aid the Otter theorem prover in finding short proofs for set-theoretic problems. This dissertation investigates the applicability of these heuristics to next generation theorem provers. / Computing / M.Sc. (Computer Science)

Made available in DSpace on 2014-06-12T15:51:39Z (GMT). No. of bitstreams: 2 arquivo2757_1.pdf: 5759741 bytes, checksum: 8075c58c36a6d409b242f2a7873fb02f (MD5) license.txt: 1748 bytes, checksum: 8a4605be74aa9ea9d79846c1fba20a33 (MD5) Previous issue date: 2009 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Vitorino dos Santos Filho, Jairson; Pierre Louis Robin, Jacques. CHROME: a model-driven component-based rule engine. 2009. Tese (Doutorado). Programa de Pós-Graduação em Ciência da Computação, Universidade Federal de Pernambuco, Recife, 2009.

Beschreibungslogiken (Description logics, DLs) sind eine Klasse von Wissensrepraesentationsformalismen mit wohldefinierter, logik-basierter Semantik und entscheidbaren Schlussfolgerungsproblemen, wie z.B. dem Erfuellbarkeitsproblem. Zwei wichtige Entscheidungsverfahren fuer das Erfuellbarkeitsproblem von DL-Ausdruecken sind Tableau- und Automaten-basierte Algorithmen. Diese haben aufgrund ihrer unterschiedlichen Arbeitsweise komplementaere Eigenschaften: Tableau-Algorithmen eignen sich fuer Implementierungen und fuer den Nachweis von PSPACE- und NEXPTIME-Resultaten, waehrend Automaten sich besonders fuer EXPTIME-Resultate anbieten. Zudem ermoeglichen sie eine vom Standpunkt der Theorie aus elegantere Handhabung von unendlichen Strukturen, eignen sich aber wesentlich schlechter fuer eine Implementierung. Ziel der Dissertation ist es, die Gruende fuer diese Unterschiede zu analysieren und Moeglichkeiten aufzuzeigen, wie Eigenschaften von einem Ansatz auf den anderen uebertragen werden koennen, um so die positiven Eigenschaften von beiden Ansaetzen miteinander zu verbinden. Unter Anderem werden Methoden entwickelt, mit Hilfe von Automaten PSPACE-Resultate zu zeigen, und von einem Tableau-Algorithmus automatisch ein EXPTIME-Resultat abzuleiten. / Description Logics (DLs) are a family of knowledge representation languages with well-defined logic-based semantics and decidable inference problems, e.g. satisfiability. Two of the most widely used decision procedures for the satisfiability problem are tableau- and automata-based algorithms. Due to their different operation, these two classes have complementary properties: tableau algorithms are well-suited for implementation and for showing PSPACE and NEXPTIME complexity results, whereas automata algorithms are particularly useful for showing EXPTIME results. Additionally, they allow for an elegant handling of infinite structures, but they are not suited for implementation. The aim of this thesis is to analyse the reasons for these differences and to find ways of transferring properties between the two approaches in order to reconcile the positive properties of both. For this purpose, we develop methods that enable us to show PSPACE results with the help of automata and to automatically derive an EXPTIME result from a tableau algorithm.