1 |
A novel technique for phased array receivers based on an economic sampling schemeBlanco Moro, Rodrigo 04 September 2013 (has links)
Phased array systems present desirable antenna features like beam steering and high gain. However, due to their high cost, civilian applications cannot generally afford them, restricting their usage to military. Hardware involved in phased array systems is expensive and the number of devices is high, since there is usually one device of each kind (filter, amplifier, shifter..) for each individual antenna. Alternative techniques, mainly based on TDMA, have been developed looking for lowering the number of elements in the system. However, these approaches increase the system bandwidth, multiplying it by a factor of $N$ (Number of antennas), as they use redundant information.
In this thesis, a novel phased receiver, based on an economic sampling scheme is proposed. All the elements in an array receive a common information (signal amplitude) and a unique information (relative delay between elements). The idea is to sample only the information required to reconstruct the transmitted signal and discard the redundant one. This idea is achieved by sampling just one antenna during each RF cycle and then gathering all the information taking in account the relative delay between different antenna elements.
The proposed technique is mathematically proved and validated by simulation. As a first approach, the equation for the received signal in the frequency domain is derived for a linear array. The radiation pattern and the received signals are simulated for equally spaced planar and linear arrays. Bandwidth signal transmission is demonstrated and tapering effects are shown. After that, the proposed technique is expanded for arbitrary structures and the resulting system bandwidth is enhanced by using different sampling order sequences. / Master of Science
|
2 |
Bandwidth Enhancement of Balanced Folded Loop Antenna Design for Mobile Handsets Using Genetic AlgorithmsZhou, Dawei, Abd-Alhameed, Raed, Excell, Peter S. January 2008 (has links)
Yes / In this paper, a simple folded loop antenna (FLA) for handsets with relatively wide-
band impedance, designed and optimized using genetic algorithms (GA). The FLA dimensions
were optimized and evaluated using GA in collaboration with NEC-2 source code. Configuration of optimal FLA with excellent VSWR covering entirely the required GSM1800 frequency bands was found within the maximum generation. A prototype antenna was tested to verify and validate the GA-optimized antenna structure. The measured data have shown good agreement with predicted ones. Moreover, the capabilities of GA are shown as an e±cient optimisation tool for
selecting globally optimal parameters to be used in simulations with an electromagnetic antenna design code, seeking convergence to designated specifications.
|
3 |
Bandwidth Enhancement of WWAN Laptop Computer Antenna Using a Parasitic Open SlotChen, Wei-Ji 09 June 2010 (has links)
In this thesis, we propose a new bandwidth-enhancement method of using a parasitic open slot to achieve a wide lower band for the internal laptop computer antenna with a small size to cover the GSM850/900 operation and a wide upper band to cover the GSM1800/1900/UMTS operation as well. The occupied antenna volume is only 48 ¡Ñ 10 ¡Ñ 3.5 mm^3 above the top edge of the display ground. For practical application, we analyze the effects of the antenna position, nearby metal plate, shielding metal plate, keyboard ground, FR4 substrate, and the size of display ground on the performance of the WWAN antenna. In addition, effects of the user¡¦s whole-body on the proposed antenna are also analyzed. Owing to the user¡¦s whole-body being mainly lossy materials, a decrease in the antenna¡¦s radiation efficiency is observed when the user¡¦s whole-body is in close proximity to the WWAN laptop computer antenna.
|
4 |
BANDWIDTH-ENHANCEMENT DESIGNS OF SLOT-LOADED RECTANGULAR MICROSTRIP ANTENNASSze, Jia-Yi 11 January 2001 (has links)
The bandwidth-enhancement characteristics of slot-loaded rectangular microstrip antennas constructed on a thin microwave substrate have been investigated in this dissertation. The primary design process about this topic is demonstrated. Firstly, a new antenna design idea is provided from pre-determined antenna design specifications or obtained antenna performances from the previous antenna design, which lead to a novel antenna configuration. From the results of the simulation software IE3DTM, the characteristics of this new antenna configuration are obtained and compared with the experimental results. The antenna configuration is also modified to achieve a final optimal design from the comparison results. The study of the single-feed dual-frequency rectangular microstrip antenna with a pair of bent slots is first presented. By embedding properly-designed slots on a rectangular microstrip patch, the impedance characteristics of this antenna design have been effectively changed to exhibit dual-resonant behavior, which result in the excitation of two adjacent resonant modes with similar radiation characteristics. Furthermore, the two resonant modes can be excited at frequencies very close to each other to form a wider operating bandwidth by embedding additional perturbation slots. Four successful antenna designs with different embedded-slot shapes for bandwidth enhancement have been implemented and discussed in this dissertation.
|
5 |
Dielectric resonator antennas and bandwidth enhancement techniquesCastillo Solis, Maria De los angeles January 2015 (has links)
In this thesis a technique that is being used in another area of technology to optimize light reception in a photographic camera was also applied to the dielectric resonator antenna. The technique consisting of the use of thin film to couple the media and camera impedances resulted in a dielectric resonator antenna bandwidth enhancement technique. The bandwidth enhancement technique was found when thin film dielectric layer structure was used to couple the dielectric resonator and its feed mechanism. Remarkable good performance was detected with a coplanar waveguide fed cylindrical dielectric resonator antenna which resulted in an improvement to its fractional bandwidth from 7.41% to 50.85%. Extensive experimental work was undertaken in order to explore the extent offered in bandwidth performance by using thin film dielectric layer structure in the dielectric resonator antenna performance. The experimental tasks were designed in order to investigate the influence of the thin film dielectric layer structure in relation to its size, shape, thickness, position and direction. Experimental results were supported with simulation work with the computer simulation technology microwave studio. The pieces of the material used for undertaking this experimental work were manually handcrafted. Four different dielectric resonator antenna designs were used in order to carry out the experimental work including the coplanar waveguide fed cylindrical dielectric resonator antenna. The other three dielectric resonator antennas were implemented using the same microstrip feed mechanism. Improved performance in bandwidth was achieved for all the designs. Optimization of the incoming signal was observed when a piece of thin film dielectric layer structure was placed in position between the feed mechanism and the dielectric resonator antenna. The optimization was observed as an enhancement in both the return loss level and the bandwidth of work. Different unexpected operational modes from were activated, such modes being called perturbed modes. Two different shapes were used in this project. Cylindrical dielectric resonator antenna (ɛr = 37) from a commercial provider and two novel rectangular dielectric resonator antennas. The novel rectangular dielectric resonator antennas were created with the methodology presented in this thesis. The rectangular dielectric resonator antennas were elaborated with transparent ceramic material (ɛr = 7) and TMM10i (ɛr = 9.8) from the Rogers Corporation company. The bandwidth enhancement technique was tested in novel embedded dielectric resonator antennas. A coplanar waveguide fed embedded cylindrical dielectric resonator antenna achieved a maximum bandwidth enhancement of 156.77% around f = 3.79 GHz with a thin film dielectric layer structure modified rectangular piece on one edge. Escalation to dielectric resonator antenna design at millimeter wave frequencies was achieved by using thin film dielectric layer structure bandwidth enhancement technique and a handcrafted printed circuit board millimeter wave feed mechanism. The millimeter wave feed mechanisms were achieved using a low cost alternative technique conceived as part of this project. Millimeter wave dielectric resonator antennas were implemented using thin film dielectric layers structure. The antennas deliver an adequate performance in bandwidth. The work presented in this thesis demonstrates dielectric resonator antenna simpler geometry, simple couple schemes, small size, low profile, light weight, and ease of excitation and orientation. Other parameters have also been investigated covering reduced complexity, high degree of flexibility, ease of fabrication and the use of low cost technology to escalate to millimeter wave frequencies.
|
6 |
Modelagem de chaves MEMS para aplicações em RF. / Modeling of MEMS switches for RF applications.Silva, Michel Bernardo Fernandes da 05 October 2007 (has links)
Nesta dissertação, os principais conceitos de MEMS, suas aplicações, processos de fabricação, componentes e sistemas são abordados. O objetivo desta dissertação é o estudo detalhado de chaves MEMS para aplicações em RF, que apresentam bom comportamento em altas freqüências e com potencial de melhoria em sua banda de operação. Em particular, aprofundou-se o estudo para o caso de uma chave MEMS de membrana capacitiva paralela sobre um guia de onda coplanar ou CPW - Coplanar Waveguide. O objetivo foi o de ampliar sua banda de operação, mantendo-se outras especificações inalteradas. Partindo-se de uma chave com banda de operação nula para critérios de perda de retorno e isolação mínimas iguais a 20 dB, com alteração na geometria da chave foi possível obter-se uma banda de 28 GHz e posteriormente ampliá-la para 31 GHz, praticamente sem alteração nas demais características elétricas. / In this thesis, the main concepts of MEMS, their application, fabrication processes, components and systems are addressed. The objective of the thesis is a detailed study of MEMS switches for RF applications, that present good performance at high frequencies and with a potential for bandwidth improvement. More specifically, the study was deeply conducted for shunt capacitive membrane MEMS switches over CPW - Coplanar Waveguide. In this case, the objective was to enlarge the operation bandwidth, keeping the other specifications unchanged. Starting with a switch with null operational bandwidth for criteria of minimum return loss and isolation of 20 dB, after a modification in the switch geometry, it was possible to obtain an operational bandwidth of 28 GHz and then to enlarge it to 31 GHz, keeping almost unchanged the other electric characteristics.
|
7 |
Modelagem de chaves MEMS para aplicações em RF. / Modeling of MEMS switches for RF applications.Michel Bernardo Fernandes da Silva 05 October 2007 (has links)
Nesta dissertação, os principais conceitos de MEMS, suas aplicações, processos de fabricação, componentes e sistemas são abordados. O objetivo desta dissertação é o estudo detalhado de chaves MEMS para aplicações em RF, que apresentam bom comportamento em altas freqüências e com potencial de melhoria em sua banda de operação. Em particular, aprofundou-se o estudo para o caso de uma chave MEMS de membrana capacitiva paralela sobre um guia de onda coplanar ou CPW - Coplanar Waveguide. O objetivo foi o de ampliar sua banda de operação, mantendo-se outras especificações inalteradas. Partindo-se de uma chave com banda de operação nula para critérios de perda de retorno e isolação mínimas iguais a 20 dB, com alteração na geometria da chave foi possível obter-se uma banda de 28 GHz e posteriormente ampliá-la para 31 GHz, praticamente sem alteração nas demais características elétricas. / In this thesis, the main concepts of MEMS, their application, fabrication processes, components and systems are addressed. The objective of the thesis is a detailed study of MEMS switches for RF applications, that present good performance at high frequencies and with a potential for bandwidth improvement. More specifically, the study was deeply conducted for shunt capacitive membrane MEMS switches over CPW - Coplanar Waveguide. In this case, the objective was to enlarge the operation bandwidth, keeping the other specifications unchanged. Starting with a switch with null operational bandwidth for criteria of minimum return loss and isolation of 20 dB, after a modification in the switch geometry, it was possible to obtain an operational bandwidth of 28 GHz and then to enlarge it to 31 GHz, keeping almost unchanged the other electric characteristics.
|
8 |
Magneto-Dielectric Polymer Nanocomposite Engineered Substrate for RF and Microwave AntennasMorales, Cesar A. 01 January 2011 (has links)
This dissertation presents the first reported systematic investigation on the implementation of multilayer patch antennas over Fe3O4-based polymer nanocomposite (PNC) magneto-dielectric substrates. The PNC substrate is created by the monodispersion of Fe3O4 nanopthesiss, with mean size of 7.5nm, in a polymeric matrix of Polydimethylsiloxane (PDMS).
Recently, magneto-dielectric substrates have been proposed by several researchers as a means for decreasing the size and increasing the bandwidth of planar antennas. Nevertheless, factors such as high loss and diminished control over magnetic and dielectric properties have hindered the optimal performance of antennas. In addition, the incompatibility and elevated complexity prevents integration of conventional magnetic materials with antennas and standard fabrication processes at printed circuit boards (PCBs) and wafer levels. Additionally, the low hysteresis losses exhibited by uniformly embedded superparamagnetic nanopthesiss complemented by the ease of integration of polymer nanocomposites in standard fabrication processes, offer promising solutions to resolve any of the complications and concerns foresaid.
Towards this dissertation work, one multilayer antenna was constructed over a molded PDMS substrate along with three similar antennas built on PDMS-Fe3O4 PNC substrates with different Fe3O4 nanopthesis loading concentrations in the PDMS matrix of 80%, 50% and 30% by weight. This pioneering work in the experimental implementation and characterization of magneto-dielectric PNC antennas has not only resulted in antennas with different operational frequencies in the 3-5GHz band, but also expanded our knowledge base by correlating the concentration of magnetic nanopthesiss to key antenna performance metrics such as antenna bandwidth, antenna efficiency and miniaturization factors.
Among the most significant results a magneto-dielectric antenna with maximum miniaturization factor of 57%, and a 58% increase in bandwidth, whilst retaining an acceptable antenna gain of 2.12dBi, was successfully demonstrated through the deployment of molded PDMS-Fe3O4 PNC substrate under external DC bias magnetic fields.
This dissertation also presents a versatile process for constructing flexible and multilayer antennas by the seamless incorporation of a variety of materials such as PDMS, Liquid Crystal Polymer (LCP) laminates, metal clads and molded magneto-dielectric polymer nanocomposites with evenly embedded magnetic nanopthesiss.
|
9 |
Ressoadores e guias dielÃtricos cilÃndricos operando em micro-ondas e Ãptica: antenas dielÃtricas e acopladores refletores de Bragg a fibra / Cylindrical dielectric resonators and waveguides operating at microwave and optics: dielectric antennas and fiber Bragg grating couplersHÃlio Henrique Barbosa Rocha 26 November 2010 (has links)
FundaÃÃo Cearense de Apoio ao Desenvolvimento Cientifico e TecnolÃgico / CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior / Duas contribuiÃÃes caracteristicamente distintas, nÃo obstante correlacionÃveis num mesmo sistema de telecomunicaÃÃo, sÃo apresentadas. A primeira versa sobre antenas ressoadoras constituÃdas por novas cerÃmicas dielÃtricas à base de Fe2O3. Os materiais desenvolvidos foram caracterizados na faixa de micro-ondas. Tratam-se de dielÃtricos com baixa permissividade relativa, baixa tangente de perda, e, no caso das amostras monofÃsicas, com coeficiente de temperatura na frequÃncia de ressonÃncia negativo. Posteriormente, as antenas ressoadoras dielÃtricas de geometria cilÃndrica (CDRAs) suportadas em plano de terra retangular e alimentadas por sonda monopolar sÃo analisadas segundo critÃrios de desempenho de irradiaÃÃo, quais sejam: frequÃncia de ressonÃncia, impedÃncia de entrada, largura de banda e padrÃes de irradiaÃÃo. AlÃm de experimentaÃÃo, o seu estudo envolveu procedimento computacional, no que foi promovida a comparaÃÃo de resultados. O mÃtodo dos elementos finitos, no qual està baseado o programa comercial empregado, foi utilizado para anÃlise destas antenas. Resulta que para maiores valores de permissividade relativa de uma amostra, menores sÃo a frequÃncia em que a mesma ressoa e a sua largura de banda. Ainda, foi observado satisfatÃrio casamento de impedÃncia e padrÃes de irradiaÃÃo "broadside", o que candidata os novos materiais desenvolvidos a esta importante aplicaÃÃo. Adicionalmente, mediante empilhamento dos protÃtipos monofÃsicos examinados, foi verificada a remodelagem da largura de banda em relaÃÃo Ãs contrapartidas individuais, provavelmente devido à excitaÃÃo de modos de ordem elevada das CDRAs. A segunda contribuiÃÃo està enfocada no contexto dos guias de ondas dielÃtricos operando em frequÃncias Ãpticas. Neste cenÃrio, sÃo investigados acopladores refletores de Bragg a fibra (FBGCs), estruturas resultantes da combinaÃÃo de dois dispositivos reconhecidamente versÃteis e de ampla aplicaÃÃo: redes de Bragg e acopladores direcionais. Foram apreciados dois estudos de caso numÃricos nos quais se fez promover a interaÃÃo de sinais Ãpticos com as estruturas propostas. Na medida em que descreve com satisfatÃria precisÃo as propriedades Ãpticas dos dispositivos de interesse, o modelo matemÃtico empregado à baseado na teoria dos modos acoplados. O tratamento numÃrico à realizado mediante codificaÃÃo, em linguagem de programaÃÃo FORTRAN, de um algoritmo preditivo-corretor. Considerando regimes pulsados em termos da potÃncia operacional, o problema foi analisado no domÃnio da frequÃncia e, sobretudo, no domÃnio do tempo. Em condiÃÃes especÃficas, a possibilidade de realizaÃÃo da extraÃÃo, reconfiguraÃÃo e comutaÃÃo de pulsos, exemplos de funÃÃes essenciais ao processamento totalmente Ãptico, reforÃam a importÃncia de tais estruturas hÃbridas. / Two heterogeneous contributions to modern communication systems â although fully possible to be correlated â are presented. The first one deals with resonant antennas consisting of new dielectric ceramics based on Fe2O3. These materials characterized at microwave frequency range possess low relative permittivity, low loss tangent and, concerned with the monophasic samples, negative temperature coefficient of resonant frequency. Subsequently, the cylindrical dielectric resonator antennas (CDRAs) supported on rectangular ground plane and fed by monopole are analyzed according to the following radiation performance criteria: resonant frequency, input impedance, bandwidth and radiation patterns. Besides experimentation, the study involved computational procedure, so that the results of both can be compared. A commercial software based on the finite element method was employed to examine the CDRAs. It follows that as higher is the permittivity of a material, the lower are the frequency at which it resonates as well as its bandwidth. Satisfactory impedance matching and broadside radiation patterns are observed, what enables the materials investigated to this relevant application. Additionally, the stacking of the monophasic CDRAs prototypes resulted in bandwidth enhancement, presumably due to their excited high order modes. The second contribution focuses on dielectric waveguides operating at optical frequencies, being fiber Bragg grating couplers (FBGCs) investigated in this scenario. Indeed, they result from a combination of two versatile and widely applied devices: fiber Bragg gratings and directional couplers. Two numerical case studies related to the interaction between optical signals and structures were performed. The theoretical model observed is based on the coupled mode theory since it provides a satisfactorily accurate description of the devices optical properties. By the way, the theoretical model is coded in FORTRAN programming language according to a predictor-corrector algorithm. In terms of operational power levels, analyses are carried out in frequency and (mainly) time domains. Under specific conditions, the capability of the extraction, reshaping and switching of pulses â examples of essential functions for all-optical processing â reinforces the importance of such hybrid structures.
|
10 |
Low-Profile Wideband Antennas Based on Tightly Coupled Dipole and Patch ElementsIrci, Erdinc 21 October 2011 (has links)
No description available.
|
Page generated in 0.0623 seconds