he thesis focuses on building of dynamic mathematical model of biomass boiler as a controlled system and the use of this model in practise. At the first part of the thesis the area of energy production using biomass is introduced and the current development at the area of the automatic control of biomass boilers with medium energy output (in units of MW) is described. Although the main topic of the thesis is the construction of model of biomass boiler for control purposes, thesis deals with technology of boilers and principles of its inner processes as well. Creation of the model comes out not only from these important findings, but also from experimental data collected during measurements in real operation. Heat and mass balance calculations were made according to these data and they serve to precise static properties of experimental unit for biomass combustion. Central part of the thesis presents development of the final model that resulted from balance calculations and from step responses of the system obtained by measuring. Built dynamic model is compared with experimental data through simulations in Simulink and verified. At the next part the model of controlled system is completed with control system and closed-loop control circuit is validated and verified by simulation. Then the design of new controller configuration, which improves the quality of control considerably, is presented. At the final part of the thesis, possibilities of other use of the model of boiler are given, both in control theory and in industrial practice.

This Master’s thesis deals with design of heating source and heating system in the model object. Design is based on three variants of sources and heating systems. The first option is a heating pump air/water, the second option is pellet boiler and the third option is heating pump ground/water. At first heating losses are determined. Then heating systems and related heating sources are designed. The fundamental part of these free options is a design of alternative source for central heat and and hot water and heat storage. The last part is comparison of all variants.

The introduction of theoretical part deals history of floor heating. Here is an overview of the technology, which was for centuries used for floor heating. Further included in the introductory part of the aggregate materials used, which are used for floor heating, and used. In the next part of the theoretical introduction we are given the best known ecological heat source. These are mainly heat pumps and solar collectors. The last part is made in the proposal which are important values calculated for the design and seamless use of central heating system.

This thesis solves a design of a grate boiler burning wood chips or brown coal with a heat output of 160 MW. Stoichiometry flue gas is calculated according to the specified composition of each fuel. The dimensions of the individual heating surfaces are primarily calculated for burning wood chips and subsequently checked for the combustion of brown coal. Design of the boiler is completed by checking the overall heat output. Boiler design is accompanied by drawing documentation.

The thesis deals with the design of the boiler to combustion of mixed communal waste. The introductory chapters present introduction of the problem, short explanation about fuel of the boiler and speciality of the boiler to combustion of mixed communal waste. The main part is the heat calculation of the boiler, which consists of stoichiometry of the combustion, heat losses, then disposition of heat performances to individual exchange surfaces. In the end is summary of calculation and knowledge consequent of the calculation.

The master thesis deals with hydraulic characteristics of once-through boilers and describes the problems which may arise during the flow of water through the evaporator. Especially the formation of aperiodic instability of the evaporator and hydraulic uniformity amongst every steam generating tube. The thesis describes parameters, which cause these problems, and solutions how to deal with them. The calculation has been done for evaporator of the boiler called K2 located in power station in Chvaletice.

This master’s thesis pertains to heating practices of low-energy houses using a heat pump (example 1) and low-temperature condensing boiler (example 2). The first part of the work contains calculations of suggested building’s heat efficiency and of under-floor heating. The second part of the work includes estimates of seasonal heating factors for construction with a heat pump. Based on the comparison: both of these heating systems are recommended; the capacity of the warm water container is established; and safety elements are chosen. Furthermore, a system of regulation for warm water heating is determined, and a curve of equithermal regulation for heating is calculated. Both of the recommended heating possibilities include calculations of costs of supplies and manufacturing, as well as blueprints for construction.

My diploma thesis deals with heating with the aid of renewable energy sources and thier application in the building of elementary school. This thesis is devided into three parts. The first part is theoretical and is focused on overview of renewable energy sources. It deals with biomass boilers and heat pumps in detail. The second part of this thesis contains comparison of two variants of heat sources and necessary calculations and designs. The first variant is an air-to-water heat pump and the second one is a pellet boiler. The chosen variant is elaborated in detail in the last part. The last part contains technical drawings and technical report.

This Master´s thesis deals with a thermal calculation and dimensional design of steam boiler for natural gas combustion with respect to the high efficiency of the boiler. It includes stoichiometric calculation and calculation of technical specifications of the boiler. Dimensions of combustion chamber are proposed. The crucial part of this thesis includes thermal calculation of designed heat-exchanging surfaces. The heat balance of the whole boiler is made to verify the results.

The diploma thesis on the selection of appropriate technology to produce the welded construction of electric boiler JE6 / 12 aims to evaluate available production technologies and choose the most suitable of them. Choosing the technologies focuses primarily on those that are available at Slokov. Due to the connection of the welding robot to the production, it is necessary to consider the overall connection of the production and the high accuracy of the production. The individual methods of production, material separation, welding, bending and surface treatment are first theoretically analyzed and their advantages, disadvantages and parameters are summarized. Subsequently, it is practically tested individual technologies for a representative part and it evaluates the achieved parameters and economics of production. With the results obtained, the most suitable technologies are selected. With the selection of technologies, there is a need for a change in design and production parameters. Changes and modifications to the design describe another point. To achieve maximum efficiency and quality of production, a welding robot is used to make welds. The description of the production, modifications and overall design of the robot describes the next point of this work. The last part summarizes the economics of selected production technologies and details the technological process. The aim of the thesis is to design such technologies that will be advantageous from the point of view of the economy and from the perspective of the available possibilities of the company.