The project documentation, processed in the framework of the diploma thesis, solves the new building of the administrative building of the building company in the village Lukov u Moravských Budějovic. The building is made of traditional brick technology therm tl. 50 cm, without insulation, ceilings are reinforced concrete, flat roof, vegetation. Vegetation is also part of the facade of the building, which at the same time serves as a root cleaner. The philosophy of the whole design is to create a high-quality working environment for building company employees, a pleasant environment for customers and to best solve the environmental footprint of the building. The building is designed as a modern office building, with space for leisure activities of staff and their visits, taking into account the responsible approach to the development industrial site and the surrounding nature. The building efficiently manages potable, rain and wastewater, the envelope of the building, and the individual structures are designed to make the entire building as energy-consuming as possible, and do not pump irreparably by nature its natural resources in a larger quantity than necessary.

This master´s thesis deals with a draft of a health centre building in Chlumec nad Cidlinou. The centre is situated on a corner building site with barrier-free access near the city centre. The building is designed with simple functional lines ground on foundation strips with flat green roof. The perimeter walls, internal load-bearing and shear walls are from vertically perforated T&G block bricks. Internal non-load-bearing prefab walls are coated with plasterboard. Ceiling constructions and an attic are made of monolithic reinforced concrete. The building envelope is insulated with mineral wool. Most of the perimeter walls are coated with breathable facade made of lacquered galvanized lamellas and minor part of walls is compositely insulated and plastered with a scratched facade plaster. The health centre building is notionally divided into two masses with a three-storey west part and two-storey east part of the building. Both parts are mutually connected by vertical communication space with elevator looped by counter clockwise three-flight staircase. Ambulant health care will be provided in total 9 consulting rooms, 3 ambulant care offices and private clinic with 3 consulting rooms. Independent business of the commercial area and café provide the additional function. The master´s thesis also includes assessments in terms of fire risk, energy saving and heat protection, acoustics and vibrations, lighting and sunlight.

The subject of my diploma thesis is the design of a new medical center MEDCEN in the area of the Jihlava hospital, on plot no. 4374/1. The total land area is 22 706 m2. The building has three aboveground and one underground floor. The vertical bearing structure consists of masonry ceramic elements, which are complemented by a monolithic, water-reinforced concrete in the underground floor. Vertical peripheral structures are equipped with thermal insulation system, in the above-ground floors with ventilated facade. The vertical load-bearing structures are made of prefabricated reinforced concrete panels and reinforced by reinforced concrete beams at the local load. The whole building is designed flat single-skin roof with a classic order of layers, where the main waterproofing layer consists of plasticized PVC foils. The layout of the building is divided into left and right wing, which connects the central central part. The entire underground floor is designed to be operational, there are parking spaces for employees, storage facilities and technical facilities of the building. Individual offices, nurses and waiting rooms are designed on all above-ground floors. In the central central part are designed sanitary rooms for visitors and employees. On the first floor is a pharmacy and X-ray examination room. On the third floor there are two office management offices and one-day surgery premises.

This paper aims to elaborate an urbanistic study focused on the establishment of a multifunction athletic and recreational area located in Vsetín-Ohrada, carrying the name of the location, Ohrada. The reason to elaborate on this project is the current desolate state of the area, which already does not fulfil its purpose and serves only as lodgings and as a facility for the tennis club. My approach for this project implies identified accidence of buildings with an emphasis on maximal use of daylight, open spaces, green areas, and social interactions. All of these parts connect ideas and needs of future generations and deliver into the area new Genio Loci. For me, the biggest challenge in this complex area is finding the answer to meaningful use of the big amount of soil that is part of the canker tribune. The solution for this challenge might be in the creation of new access paths and footbridge to the buildings which provide several parts of space with different atmosphere and purpose. The main idea was the creation of a leisure public space with an emphasis on the variability of used areas that serve people from all age groups. It creates several main areas that divide the location and deliver various atmospheres for each generation. Additionally, the area as a whole is open and accessible to the public. A sign of long-term functional society is the ability of considerable behaviour toward public areas. Space in front of and between buildings happened to be more important than the building itself. In this case, we can talk about public life that is sustainable in time.

The aim of this master‘s thesis is to design a sports hall including an accommodation facility in Hradec Králové. Sports hall is situated in a town district called Věkoše. It is tree-storey building equipped with combined pillar‘s and wall‘s support system. Building is founded on solid slab and propped piles. Pillars are made of steel, walls are made of ceramic bricks and curved roof is made of gluelam beams and roof trusses with aluminum cover system Kalzip. There are two single ply flat roofs. Also basement is a part of the building. For spectators two separated auditoriums with steel support system are designed. The accommodation for twenty people was split into ten rooms. It is designed as barrier free building for both sportsmen and audience.

The thesis deals with new building of the basement multifunctional building with flat roof in town Klatovy. The building has four aboveground and one underground floor. The whole building offers barrier free access. The entrance to the residental part of the building and the stores are on the east side. The entrance to the wine is situated on the west. There are collective garages on the first basement floor. On the first abovegroung floor are selling space, a wine and technical facilities of the building. On the second floor one flat for disabled people and five flats. Six flats are situated od third floor and four flats on fourth floor. The combined construction is made from support system Porotherm and reinforced concrete. The building is based on grillage base from reinforced concrete. The structure of ceiling is made from reinforced concrete. Two elevators and two reinforced concrete monollithic staircases can be found in the building. The roof over the whole building is single-layer with aggravating gravel. The parking is situated in the undergroung part and on the plot belonging to the building and is designed for physiccally disabled people.

Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.

This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.

The diploma thesis deals with the design and elaboration of the project documentation of a polyfunctional house with a café in Kyjov. The new building is located in the northern part of the city. It is a 4 floor object, partlial basement building with a saddle roof. The house is based on plain concrete slabs. The supporting peripheral and internal masonry is designed from POROTHERM brick blocks. In the cafeteria, an open layout is proposed using beams and columns. Ceiling structures are designed from the POROTHERM MIAKO system. The roof structure is designed with a truss with sheet metal cover. The perimeter walls in the 1PP are designed from blocks of loose formwork filled with concrete, which are insulated with extruded polystyrene. The building is functionally divided into 2 parts, each with its own entrance. The café is equipped with a vestibule, its own café, toilet for women and men with cabins for handicapped visitors and a background with a storeroom, dressing room and WC with a hall. The residential part consists of 4 garages and 6 apartments, 2 of which are adapted for the handicapped. The object is designed with natural ventilation. The object is barrier-free. In front of the building is proposed a parking space for 9 seats, 2 of which are designed for handicapped and 2 for apartment owners.

Diploma thesis describes the design and processing of project documentation of the multifunctional building. The multifunctional building is located in the central part of the town Náměšť nad Oslavou. The building has 4 floors. It is partly cellared building with flat roof and walkable terraces. This building is consisted of 2 functional parts, the first part is designed for living and the second one is designed for contact with the customer. There are shops and offices. The first floor is wheelchair accessible. In the basement there is a technical background of the building and cellars for housing units. In this multifunctional building we can find 13 residential units and five offices. All of the floors are connected with staircase and lift. The Carpark and the private garden with playground are also part of this residential area. This building is based on concrete blocks. Load-bearing, peripheral walls and connecting walls are made of ceramic blocks. A monolitic ceiling construction is the combination of the iron and the concrete. Two types of insulation are used in peripheral walls. The first one is called ETICS, external thermal insulation composite system, made of polystyrene. The second type of insulation is facade cladding system where the main insulation layer is made of mineral wool. The insulation layer is replaced by XPS polystyrene where facade is in contact with the ground. Facade cladding panels are made of cement and wood fibers called Cembrit.