This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.

The diploma thesis deals with the design of a rehabilitation center, which is located in the cadastral area of the village Mušov on the border of the village Pasohlávky. It is a two-storey rehabilitation center with a gym and a partial basement. The thesis deepens the initiative of Thermal Pasohlávky, which plans to build a spa resort in the same section, combining elements of spa care, recreation and sports use. The object fulfills the function of a rehabilitation medical facility. The center is designed for up to 50 patients and is functionally divided into three parts. The first part consists of rehabilitation. We will find here several exercise rooms, hydrotherapy, electrotherapy, doctor's office with waiting room and reception. Rehabilitation also includes a gym with access to the terrace and park. On the second floor we can find specialized department of ergotherapy for people with different types of disabilities and second functional part of the bulding designed for staff facilities. It is made up of staffing facilities, dressing rooms, offices and meeting rooms. The third functional part consist from the technical background of the building and is located on the ground floor. The object is designed as a wall system, built from sand-lime bricks km beta Sendvix and insulated with the ETICS thermal insulation made from mineral wool. Horizontal supporting structures are designed as reinforced concrete. The entire building is roofed with a flat roof. Wooden windows and doors are used in the building to fill the holes. Before the building is a parking lot for employees and visitors of the rehabilitation facility. The design respects the principles of barrier-free solutions. The bachelor thesis is elaborated in the form of a project documentation for the execution of the construction.

The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors

Thesis on "Planetarium with coffee" is processed in the form of project documentation for construction. The proposed facility is designed as a two-storeyed without basement with the main ground plan dimensions of 52,8 x 27,47 m and is located near the village Lošov close to Olomouc. The building is operationally divided into a part intended for public entrance and a part for operation and maintenance. Loadbearing structural system is reinforced concrete monolithic skeleton based on monolithic reinforced concrete foundation footings. Ceiling structure consists of reinforced concrete, monolithic, locally supported, cross reinforced floor slab. Vertical external walls are made of ceramic blocks with contact thermal insulation system. Part of the front rounded facade is designed as glass fronted. The building is covered by a warm flat roof. Roof cladding consists of vegetation layers, walkable terrace or non-walkable structure of roof cladding. The planetarium itself is covered by a reinforced concrete dome with a thermal insulation layer of plates of foamed glass. Fillings of doors and windows are made of aluminum profiles with isolating triple glazing. The building meets the requirements for barrier-free use of buildings.

The first part of this diploma thesis is to design an energy-efficient hotel with restaurant and car parking. The second part is also to create an assessment of the energy performance of the building and usage of energy from renewable sources. Hotel is designed with the idea of „smart buildings“ which means, that all the technological background is controlled by the main computer, which also harvests data to achieve a minimum energy use and financial demand and maximum comfort and safety at the same time by controlling the connected technology. By placing on a sloped terrain in the center of Brno, the basement floor can be used as car parking. The roof of this building is flat, green, with modifications for placing solar panels, whose design is part of this work. The third part of this diploma thesis is the spatial acoustics of the conference room on the first ground floor.