This diploma thesis deals with the issue of using fine powder of concrete recyclate. In this thesis, the theoretical expectations of milling are summarized as well as high energy milling. Afterwards professional articles, in which fine powder of concrete recyclate is successfully activated, are described and commented on. In the experimental part, there are 11 recipes of cement mortar and 3 recipes of concrete mixed. The benefit of using fine powder of concrete recyclate as a possible substitute for part of the cement is evaluated.

Les protéines Binder of Sperm (BSP) appartiennent à une superfamille de protéines exprimées dans le système reproducteur masculin, plus particulièrement dans les vésicules séminales chez les ongulés, et dans l’épididyme chez l’humain et la souris. Jusqu'à présent, des rôles variés chez différentes espèces ont été démontrés pour les protéines BSP, tels que dans la motilité et la capacitation chez le bovin. Cependant, leur rôle demeure élusif chez d’autres mammifères comme la souris et l’humain. Des études in vivo récentes ont démontré que la délétion des gènes Bsph1 et Bsph2 chez la souris n’a aucune conséquence sur la fertilité, et n’induit aucune anomalie au niveau de l'appareil reproducteur masculin. Afin d'élucider le rôle spécifique de la protéine BSP chez l'humain (BSPH1), nous avons d’abord développé une méthode de purification efficace permettant d’obtenir la protéine BSPH1 fonctionnelle car ces protéines ne sont présentes qu'en quantité infime dans l’épididyme humain. Suite, a la purification de BSPH1, j’ai réalisé des expériences in vitro et cherché à identifier son réseau d'interaction protéique. Il a été démontré que les protéines BSP interagissent avec des groupes pseudo-choline tels que le diéthylaminométhyle par affinité plutôt que par des interactions ioniques. Le diéthylaminoéthyle est chargé positivement et par conséquence, est un échangeur d'anions faible, mais les BSP interagissent avec affinité à la résine. Cette étude présente également une nouvelle méthode de purification rapide et peu coûteuse, qui fournit des protéines BSP recombinantes de grande pureté qui peuvent être utilisées pour étudier leurs rôles dans la fécondation chez les mammifères. Nous avons montré que la pré-incubation des ovocytes avec la protéine BSPH1 recombinante peut diminuer le taux de fécondation de manière dose-dépendante. Les spermatozoïdes ont également été pré-incubés avec un anticorps anti-BSPH1 et ont montré une diminution du taux de fécondation. Pour identifier le réseau d’interaction protéique de BSPH1, j'ai utilisé la méthode « Proximity-dependent biotin identification » (BioID) couplée à la spectrométrie de masse. Les résultats de la spectrométrie de masse ont démontré une interaction entre BSPH1 et toutes les sous-unités du complexe CCT / TRIC (Chaperonin containing tailless complex polypeptide 1 (CCT) ou tailless complex polypeptide 1 ring complex (TRiC)). Ce complexe interagit avec un autre complexe appelé BBSome (Bardet–Bied syndrome complex), qui joue un rôle important dans le transport de protéines à travers les cils primaires. BSPH1 a également interagi avec un grand nombre de protéines de la famille CEP (centrosome-associated proteins), importantes dans la formation des cils primaires par les microtubules et de la maturation du centrosome, qui soutiennent le rôle de BSPH1 dans les cils primaires. Dans l’ensemble, cette étude démontre que BSPH1 pourrait avoir un nouveau rôle en tant que chaperonne, à travers les cils primaires dans les cellules qui l’expriment dans l’appareil reproducteur masculin. / Binder of SPerm (BSP) proteins belong to a superfamily of proteins expressed in the male reproductive tract, particularly in seminal vesicles of ungulates (e.g., bovine, ram) and in the epididymis of humans and mice. So far, BSP proteins have been shown to play different roles in different species such as in motility and capacitation in bovine; however, their role remains unclear in other mammals. For instance, depletion of Bsph1/Bsph2 in mice had no effect on fertility. In order to elucidate the specific role of BSP protein in humans (BSPH1), I sought to investigate a purification method to produce functional human BSP protein, as these proteins are only present in minute amounts in the human epididymis. Following purification of BSPH1, I carried out in vitro experiments and sought to identify its protein interaction network. BSP proteins have been shown to interact with pseudo-choline groups such as diethylaminomethyl through affinity rather than ionic interactions. Diethylaminoethyl is positively charged and therefore is a weak anion exchanger, but BSPs interact through affinity to this resin. This study presents a new, rapid and cost-effective purification method that provides recombinant BSP proteins of a high purity level, which can be used to study their roles in mammalian fertilization. We showed that pre-incubation of oocytes with recombinant BSPH1 can decrease fertilization rate in a dose-dependant manner. Sperm were also preincubated with anti-BSPH1 antibody and showed a decrease in fertilization rate. Secondly, I used BioID (proximity-dependent biotin identification), coupled with mass spectrometry to identify the protein-protein interaction network of BSPH1 by proximity labeling. Mass spectrometry results showed an interaction between BSPH1 and all subunits of the CCT/TRIC complex (Chaperonin containing tailless complex polypeptide 1 (CCT) or tailless complex polypeptide 1 ring complex (TRiC). This complex interacts with another complex called BBSome (Bardet–Biedl syndrome complex), which plays a role in protein trafficking through primary cilium. I also identified BBS proteins, as well as other proteins, that interact with the BBSome complex and regulate protein trafficking in the cilia. BSPH1 also interacted with a large number of CEP (centrosome-associated proteins) family proteins, important in the formation of primary cilium through microtubules and centrosome maturation, which further support the potential implication of BSPH1 with the primary cilia. Overall, this study demonstrates that BSPH1 may have a new role as a chaperone involved in protein trafficking through the primary cilia in cells that express it in the male reproductive system

The design of asphalt concrete for binder courses with high-viscosity asphalt rubber and low-viscosity asphalt rubber is carried out in the diploma thesis. Selected performance tests (low temperature characteristics, stiffness and fatigue) and water sensitivity are performed for these mixtures. Results are compared each other.

In the introduction of the Master’s thesis describes for obtaining and processing of reclaimed asphlalt. Major point of the thesis is design of asphalt mixtures with use of higher amount of RAP for asphalt binder course. Asphalt mixtures were designed with contents of 0%, 30%, 50% and 70% of RAP. On each asphalt mixtures were compared parameters set out by functional tests – resistence to permanent deformation and resistence to water.

At the beginning of the Master’s thesis the asphalt mixture of the type asphalt concrete and its basic properties are described. The main point of this work is to compare the functional properties of asphalt mixtures with the addition of higher amount of RAP and various rejuvenators used in the experimental section. From individual samples of asphalt mixtures taken during the laying, the control tests were carried out and the process of permanent deformation with the wheel tracking test was monitored. After that, using functional tests the properties of asphalt mixtures with conventional modified and unmodified asphalt bitumen enriched with the addition of declaring similar properties were compared.

The Diploma thesis is focused on rheological properties of bituminous binders and mixtures. Above all, it describes the changes of these properties of samples of bituminous binders and mixtures. Those were brought by the process of laboratory aging, since it simulates the changes occurring in the in the real-life conditions. The theoretical part depicts the field of rheology and methods utilized for simulating the ageing of binders and mixtures. The practical part describes the process of preparation of samples and its testing. Firstly, the ageing of bituminous mixture by the means of BSA method (Braunschweiger Alterung) took place, which was followed by preparing the solids for testing the modulus of stiffness and main testing. The rest of the mixture was used for extracting the binder. Tests with the binder were focused on the usage of dynamic shear rheometer (complex shear modulus, dynamic viscosity). The last part of the work is dedicated to the comparison of the outcomes of testing.

The thesis deals with composite systems, with a focus on matrix resistant to extreme conditions. The aim of this work was to research and development matrix, resistant to high temperatures, typical in case of fire. Used theoretical knowledge were realized with subsequent laboratory research. Attention was paid matrices based binder mixed with any alkali activation of alternative raw materials and geopolymers. Scattered reinforcement featured polypropylene fibers. The subject of the practical part of the two alternatives, including a matrix based on basic ingredients - cement, alternative raw materials - high fly ash, blast furnace slag, geopolymer and polymeric components incl. combinations thereof. Laboratory research conducted by determining the fundamental material properties such as density, strengths, etc., after heat exposure. The developed materials were subjected to a temperature 1400 ° C. The conclusion was selected several recipes that were based on the resulting values found to be optimal.

The thesis is focused on the comparison of the role of different types of aggregates and the binder-aggregate ratio on the properties of lime mortars. The theoretical part of the thesis deals with the effect of properties of aggregate, a binder-aggregate ratio and a use of calcareous aggregate, especially limestone, on the properties of mortars. It also deals with the utilization of limestone as aggregate in a history of masonry. In the practical part of the thesis there is a comparison of physically-mechanical and microstructural properties of mortars prepared with different type of aggregate (siliceous sand and limestone aggregate), with varying binder-aggregate ratio and also with a partial substitution of the aggregate by limestone fines. It was found that the usage of limestone instead of quartz sand produces the mortar of comparable properties. The partial substitution of the aggregate with limestone fines caused noticeable growth of strength, especially in mortars with higher binder-aggregate ratio.

This paper reports the development of an Alkali Activated Binder (AAB) with an emphasis on the performance and the durability of the AAB-matrix. For the development of the matrix, the reactive components granulated slag and coal fly ash were used, which were alkali activated with a mixture of sodium hydroxide (2 - 10 mol/l) and aqueous sodium silicate solution (SiO2/Na2O molar ratio: 2.1) at ambient temperature. A sodium hydroxide concentration of 5.5 mol/l revealed the best compromise between setting time and mechanical strengths of the AAB. With this sodium hydroxide concentration, the compressive and the 3-point bending tensile strength of the hardened AAB were 53.4 and 5.5 MPa respectively after 14 days. As a result of the investigation of the acid resistance, the AAB-matrix showed a very high acid resistance in comparison to ordinary Portland cement concrete. In addition, the AAB had a high frost resistance, which had been validated by the capillary suction, internal damage and freeze thaw test with a relative dynamic E-Modulus of 93% and a total amount of scaled material of 30 g/m2 after 28 freeze-thaw cycles (exposure class: XF3).

Non-crimp fabrics (NCFs), especially multi-axial warp-knitted fabrics, are used as reinforcement materials for fiberreinforced composites. The manufacturing of multi-axial warp-knitted fabrics by a conventional stitch bonding process to produce NCF has several disadvantages, such as filament damage, low production speed, yarn disorientation, etc. In order to overcome the existing limitations, the idea of using an adhesive binder to attach the fabric layers is a promising approach, so that the use of stitching yarns can be eliminated. The fundamental investigations presented in this paper show that the selection of the binder material has a major influence on the parameters of the textile products. Whereas the tested hotmelt adhesives offer a short curing time and a small but nevertheless sufficient bonding strength between bonded yarns, the tested reactive adhesives show a bonding strength up to 10 times higher, but at a considerably longer curing time. The reason for the different bonding strength is identified in the different penetration into the yarns. The experiments also show a significant influence of the fiber type and sizing, which needs to be taken into account when selecting fabric binders.