No / The science and engineering of biomaterials have improved the human life expectancy. Tissue engineering is one of the nascent strategies with an aim to fulfill this target. Tissue engineering scaffolds are one of the most significant aspects of the recent tissue repair strategies; hence, it is imperative to design biomimetic substrates with suitable features. Conductive substrates can ameliorate the cellular activity through enhancement of cellular signaling. Biocompatible polymers with conductivity can mimic the cells’ niche in an appropriate manner. Bioconductive polymers based on aniline oligomers can potentially actualize this purpose because of their unique and tailoring properties. The aniline oligomers can be positioned within the molecular structure of other polymers, thus painter acting with the side groups of the main polymer or acting as a comonomer in their backbone. The conductivity of oligoaniline-based conductive biomaterials can be tailored to mimic the electrical and mechanical properties of targeted tissues/organs. These bioconductive substrates can be designed with high mechanical strength for hard tissues such as the bone and with high elasticity to be used for the cardiac tissue or can be synthesized in the form of injectable hydrogels, particles, and nanofibers for noninvasive implantation; these structures can be used for applications such as drug/gene delivery and extracellular biomimetic structures. It is expected that with progress in the fields of biomaterials and tissue engineering, more innovative constructs will be proposed in the near future. This review discusses the recent advancements in the use of oligoaniline-based conductive biomaterials for tissue engineering and regenerative medicine applications.

In 2018 ESA and NASA plan to send the ExoMars rover to the Martian surface. This rover is planned to have a suite of analytical equipment that includes a Raman spectrometer. In this context, an evaluation of Raman spectroscopy as an analytical tool for interplanetary studies is investigated. The preparation techniques for appropriate inorganic and organic mixtures are interrogated. Methods are investigated to optimize the homogeneity of over 50 samples involving mineral phases; calcite, gypsum and goethite and selected organic biomolecular systems; anthracene, naphthalene and beta-carotene. From mixtures produced of these organic and inorganic materials differences between homogeneity of the samples is observed. Different mixing techniques are investigated to reduce this, however all the samples display variation on a micron scale. To resolve this issue a grid system of 9 points is implemented on solid samples and solutions are used to produce standards. The standards are devised using a range of instrument validation parameters for comparison between commercially available spectrometers and the prototype instrument. From these standards a prototype instrument is optimized for data acquisition and an evaluation procedure for instrument performance is established. The prototype Raman spectrometer is evaluated to match the specifications of the spectrometer on board ExoMars rover. A range of astrobiological relevant samples are interrogated; geological samples, biomarkers, cellular systems and bio-geological inclusions. From these samples detection of organics is observed to be only possible, with Raman spectroscopy where organics are localised in high concentrations, upon grinding and mixing geological inclusions Raman spectroscopy is unable to detect the organic components. / Appendices 3 and 4 are full text of the articles which are referenced in the text, but the published copy is not allowed to be displayed under copyright restrictions and are not included with this online thesis.

<p> Poly (dimethyl siloxane) (PDMS) has been widely used as a biomaterial in ophthalmic and other applications due to its good compatibility, high mechanical strength and excellent oxygen permeability and transparency. For use as an artificial cornea, contact lens and in other applications, modifications are necessary to improve glucose permeability and wettability for cell and tear protein and mucin interactions through modification with hydrophilic functional groups or polymers. Poly (N-isopropyl acrylamide) (PNIPAAM) is a biocompatible and hydrophilic polymer that has been extensively studied in controlled drug release applications due to its lower critical solution temperature (LCST) phenomenon. In this study, a composite interpenetrating polymer network (IPN) of PDMS and PNIPAAM was formed to generate material with reasonable oxygen and glucose permeability as well as improved wettability and mechanical properties compared to the PDMS and PNIPAAM homopolymers.</p> <p> Semi-IPNs, with low water uptake and mechanical strength, were found not to be suitable as biomaterials. Vinyl terminated PDMS/PNIPAAM IPNs had reasonable water uptake and excellent tensile stress and strain, but low glucose permeability (< 10^-10 cm^2/s). Hydroxyl terminated PDMS/PNIPAAM IPNs (PDMS-OH IPN) were successfully synthesized with reasonable mechanical properties and significantly higher glucose permeability (~10^-7 cm^2/s). Curing the PDMS-OH film with solvent was found to improve glucose transport.</p> <p> The presence of PNIPAAM in the composite networks was confirmed by FT-IR and Differential Scanning Calorimetry (DSC). Transmission Electron Microscopy (TEM) images verified the structure of interpenetrating networks. Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and X-ray Photoelectron Spectroscopy (XPS) suggested that PNIPAAM was also present on the surface and this translated to increased roughness compared with the PDMS control as determined by AFM. The LCST phenomena still remained in the IPN, although the change was not as abrupt as with pure PNIPAAM. These results suggest that the copolymer may be useful as an ophthalmic biomaterial and for controlled drug release applications.</p> / Thesis / Master of Applied Science (MASc)

The tumor microenvironment plays an important role in regulating cancer cell behavior. The tumor microenvironment describes the cancer cells, and the surrounding endothelial cells, fibroblasts, and mesenchymal stem cells, along with the extracellular matrix (ECM). The tumor microenvironment stiffens as cancer undergoes malignant progression, providing biophysical cues that promote invasive, metastatic cellular behaviors. This project investigated the influence of three dimensional (3D) chitosan-alginate (CA) scaffold stiffness on the morphology, growth, and migration of green fluorescent protein (GFP) – transfected MDA-MB-231 (231-GFP) breast cancer (BCa) cells. The CA scaffolds were produced by the freeze casting method at three concentrations, 2 wt%, 4 wt%, and 6 wt% to provide different stiffness culture substrates. The CA scaffold material properties were characterized using scanning electron microscopy imaging for pore structure and compression testing for Young's Modulus. The BCa cell cultures were characterized at day 1, 3, and 7 timepoints using Alamar Blue assay for cell number, fluorescence imaging for cell morphology, and single-cell tracking for cell migration. Pore size calculations using SEM imaging yielded pore sizes of 253.29 ± 52.45 µm, 209.55 ± 21.46 µm, and 216.83 ± 32.63 µm for 2 wt%, 4 wt%, and 6 wt%, respectively. Compression testing of the CA scaffolds yielded Young's Modulus values of 0.064 ± 0.008 kPa, 2.365 ± 0.32 kPa and 3.30 ± 0.415 kPa for 2 wt%, 4 wt%, and 6 wt% CA scaffolds, respectively. The results showed no significant difference in cell number among the 3D CA scaffold groups. However, the 231-GFP cells cultured in 2 wt% CA scaffolds possessed greater cellular size, area, perimeter, and lower cellular circularity compared to those in 4 wt% and 6 wt% CA scaffolds, suggesting a more prominent presence of cell clusters in softer substrates compared to stiffer substrates. The results also showed cells in 6 wt% CA having a higher average cell migration speed compared to those in 2 wt% and 4 wt% CA scaffolds, indicating a positive relationship between substrate stiffness and cell migration velocity. Findings from this experiment may contribute to the development of enhanced in vitro 3D breast tumor models for basic cancer research using 3D porous biomaterial scaffolds.

Bio-interface topography strongly affects the nature and efficiency of interactions with living cells and biological molecules, making hydrogels decorated with micro and nanostructures an attractive choice for a wide range of biomedical applications. Despite the distinct advantages of protein hydrogels, literature in the field has disproportionately focused on synthetic polymers to the point that most methods are inherently incompatible with proteins and heat-sensitive molecules. We report the development of multiple biomolecule-friendly technologies to construct microstructured protein and bacteriophage (bacterial virus) hydrogels. Firstly, ordered and sphericity-controllable microbumps were obtained on the surface of protein hydrogels using polystyrene microporous templates. Addition of protein nanogels resulted in the hierarchical nano-on-micro morphology on the microbumps, exhibiting bacterial repellency 100 times stronger than a flat hydrogel surface. The developed microstructures are therefore especially suitable for antifouling applications. The microstructures created on protein hydrogels paved the way for applying honeycomb template on proteinous bacterial viruses. We developed a high-throughput method to manufacture isolated, homogenous, pure and hybrid phage microgels. The crosslinked phages in each phage-exclusive microgel self-organized and exhibited a highly-aligned nanofibrous texture. Sprays of hybrid microgels loaded with potent virulent phage effectively reduced heavy loads of multidrug resistant Escherichia coli O157:H7 on food products by 6 logs. / Thesis / Doctor of Philosophy (PhD) / Bacteriophages (bacterial viruses), also known as phages, are natural bacteria predators. These viruses act as direct missiles, each phage targeting limited groups of bacteria. In addition, phages are an endless resource for self-propagating nanoparticles that can be used as building blocks for new material. I developed a platform for manufacturing a large quantity of microscale beads made of millions of phages. These micro-beads can be sprayed on fresh produce and meat to remove bacterial contamination (with the added benefit of not affecting taste or smell). I also printed phages on substrates, like an ink. The printed phage ink evolved into a patented technology for designing phage coatings on surfaces with very high surface area, like the small structures on our fingers. This phage coating was successfully used to test the existence of bacteria in liquids.

No description available.

No description available.

No description available.

No description available.

No description available.