Spelling suggestions: "subject:"biomedical materials 7surfaces"" "subject:"biomedical materials desurfaces""
1 |
Antibacterial properties of novel 1D nanostructured ZnO nanowire coatings on medical grade 316L stainless steel surfacesLi, Tak-lung, 李德龍 January 2013 (has links)
Post-operative osteomyelitis attributing to the biofilm formation on implant surface and medical grade 316L stainless steel have been reported to gain a higher rate of infection among other clinically applied metals. It is believed suppressing bacterial adhesion on implant surface at early stages can help prevent biofilm formation. The major challenges of current antibacterial surface treatments include limited biocompatibility, potential development of antibiotic resistant bacteria, short life cycle and high fabrication cost.
In this study, it is aimed to explore the feasibility of an inexpensive and simple surface modification technique to achieve a long-term antibacterial effect on medical grade 316L stainless steel while maintaining its biocompatibility. Thus, a novel 1D nanostructured ZnO nanowire coating that can provide different special topographies and can be easily fabricated by simple hydrothermal method is suggested to coat on stainless steel surfaces. Two kinds of ZnO nanowire coatings, ZnO_5hrs and ZnO_17hrs, are fabricated for further investigation. Relatively well-aligned ZnO nanowires with diameters of ~50 nm were found on ZnO_5hrs samples, while randomly-oriented ZnO nanowires with diameters of ~150 nm were found on ZnO_17hrs samples.
In the antibacterial tests, both ZnO_5hrs and ZnO_17hrs samples exhibited excellent antibacterial effects, which represent over 90% of bacterial reduction among all of the tested bacterial strains including S. aureus, P. aeruginosa and E. coli, with exception to the case of ZnO_17hrs sample with S. aureus. It is confirmed that antibacterial Zn2+ ions are released from the coatings during the test and help against bacterial adhesion. On the other hand, it is suspected that the increase in hydrophilicity and special physical topography are also antibacterial factors of the ZnO nanowire coatings.
The cytocompatibilities in both ZnO_5hrs and ZnO_17hrs samples were not satisfactory. In the cell adhesion test, the GFP-OB cells did not habitually spread and attach on the treated sample surfaces after 6 hours incubation. Cytotoxicity test results further confirm no viable MC3T3 cells were found on the treated sample surfaces. The cytocompatibility of the coating remains to be improved.
In the in-vivo study, the group of rats with ZnO_5hrs rod samples displayed a reduced number of bacterial cells in the implantation site at day 0, as well as a shorter duration (within 8 days) for bacterial termination as compared to that with untreated stainless steel rod samples. The presence of ZnO nanowire coating on medical grade 316L stainless steel rod samples demonstrates the in vivo antibacterial effect.
In short, the novel 1D antibacterial ZnO nanowire coating is successfully fabricated and coated on medical grade 316L stainless steel surfaces by a simple and inexpensive hydrothermal method. However, the biocompatibility of the ZnO nanowire coating remains to be improved. One of the critical issues is to engineer the coating in order to precisely control the Zn2+ ions release rate. For future study, the key is to find out how to manipulate the characteristics of special surface topography, together with a controllable release of Zn2+ ions on the ZnO nanowire coating to maximize the antibacterial effect while maintaining the original biocompatibility of medical grade 316L stainless steel. / published_or_final_version / Orthopaedics and Traumatology / Master / Master of Philosophy
|
2 |
Probing Cellular Response to Heterogeneous Rigidity at the Micro- and NanoscaleLiao, Jinyu January 2017 (has links)
Physical factors in the environment of a cell regulate cell function and behavior and are involved in the formation and maintenance of tissue. There is strong evidence that substrate rigidity plays a key role in determining cell response in culture. Previous studies have demonstrated the importance of rigidity in numerous cellular processes including migration and adhesion and stem cell differentiation. Immune cells have been shown to respond differently to surfaces having different rigidities. Atypical response to rigidity is also a characteristic of cancerous cells. Understanding the mechanisms that support cellular rigidity sensing can lead to new tissue engineering strategies and potential new therapies based on rigidity modulation.
A new technique was developed for the creation of biomimetic surfaces comprising regions of heterogeneous rigidity on the micro- and nanoscale. The surfaces are formed by exposing an elastomeric film of polydimethylsiloxane (PDMS) to a focused electron beam to form patterned regions of micro- and nanoscale spots. This thesis involves the formation of theses surfaces, characterization of their physical and chemical properties as a consequence of the electron beam exposure and investigation of how cells behave when plated on these surfaces.
Cellular response to different patterns of heterogeneous rigidity is performed for several cell types. Human mesenchymal stem cells plated upon electron beam-exposed PDMS in a pattern of spots with diameters ranging from 2 µm to 100 nm display differential focal adhesion co-localization to the exposed features, depending on both rigidity and feature size. This behavior persists as the area of the exposed regions is reduced below ~1 µm. On spots with diameters of ~ 250 nm and smaller, focal adhesion co-localization is lost. This supports the notion that there is a length scale for cellular rigidity sensing, with the critical length in the range of a few hundred nanometers.
When the heterogeneous rigidity surfaces are applied to CD4+ T cells, accumulations of proteins including TCR and pCasL on the exposed features are observed as a function of feature size. The pCasL appeared to significantly accumulate on 2 µm spots; For spots ~ 1 µm and below, cells appeared unable to identify the rigid regions. Further, Ca2+ release, a functional indicator of immunoresponse, is significantly enhanced on mixed-rigidity patterned PDMS relative to both soft and hard PDMS. Possible signaling pathways of TCR activation have been verified on e-beam exposed PDMS substrates with heterogeneous rigidity. These results are suggestive of possible new approaches to adoptive immunotherapy based on rigidity modulation.
Studies on breast cancer cells indicate that on patterned substrates, sub-cellular processes are also significantly modulated. Integrin recruitment is enhanced on the rigid regions. Understanding the role of geometry in cellular rigidity response will point the way toward revealing its functional response and will shed light on the mechanistic underpinnings of this process.
|
3 |
Wear resistant nanostructured diamondlike carbon coatings on Ti-alloyScholvin, Dirk 01 December 2003 (has links)
No description available.
|
Page generated in 0.0705 seconds